Introduction

•Reference 23 - One straight-blade 120V receptacle capable of drawing 50 amp, NEMA 5-50R. This accepts a NEMA 5-50P plug.

•Reference 24 - One duplex (two receptacles in a common housing) 120V straight-blade receptacle capable of drawing 20 amp, National Electrical Manufacturer’s Association (NEMA) part number 5- 20R. This receptacle accepts a NEMA numbers 5- 15P or 5-20P plugs. This receptacle is GFCI protected by reference 25. To reset this receptacle, press the reset button on item 25.

•Reference 25 – One duplex (two receptacles in a common housing) 120V GFCI straight-blade receptacles capable of drawing 20 amps, National Electrical Manufacturer’s Association (NEMA) number 5-20R. This receptacle accepts a NEMA number 5- 15P or 5-20P plug. This receptacle has a test and reset button located on the receptacle face.

•ALWAYS use grounded male plugs. The neutral line of the generator is mechanically grounded to the frame. Matching NEMA male plugs must always be used.

WARNING Contact a licensed electrician to wire electrical plugs and/or cord-sets. Improper wiring could result in a fire or electrical shock.

References 26-29 - Circuit Breakers. This portable generator has:

•Reference 26 - 1 - 20 amp (A) push-to-reset circuit breaker

•Reference 27 - 1 - 30 amp (A) push-to-reset circuit breaker

•Reference 28 - 2 - 50 amp (A) push-to-reset circuit breaker

•Reference 29 - 1 - 30 amp (A) magnetic 2-pole main circuit breaker to protect against electrical overloads.

Reference 30 - Idle Control On/Off Switch. This

feature senses the load on the generator. With no load on the generator the engine speed drops to idle. This saves fuel and lengthens engine life. When a load is applied, the engine speed returns to 3600 - 3780 RPMs. Turning the switch off disables the sensing device and the generator will run at 3600 - 3750 RPM whether or not a load is applied.

Note: When the engine is idling, it is normal for the voltmeter needle to be in the red range.

Low Oil Shutdown. The Honda engine is protected against damage resulting from low oil level. As the oil falls below the safe level, the engine automatically shuts off (the engine stop switch remains in the on position). The engine will not start until the oil is refilled to above the safe level.

Before starting your generator, thoroughly study the instructions and cautions in this manual to assure you are fully acquainted with the operation of all components of this generator. Proper preparation, operation and maintenance will result in operator safety, best performance and long life of the generator. For detailed

engine operation and maintenance always refer to the Honda engine owner’s manual furnished with the generator (Honda refers to the 13 HP engine as a GX390).

NorthStar is constantly improving its products. The specifications outlined herein are subject to change without prior notice or obligation. The purchaser and/or user shall assume liability of any modification and/or alterations on this equipment from original design and manufacture.

Before using, the user shall determine the suitability of this product for its intended use and assumes liability therein.

ANSI SAFETY DEFINITIONS

DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations.

WARNING indicates a potentially hazardous situation which, if not avoided, could result in a death or serious injury.

CAUTION indicates a potentially hazardous situation, which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

RULES FOR SAFE OPERATIONS

Safety precautions are essential when operating this generator. Respectful and cautious operation will considerably lessen the possibilities of a personal injury. This manual will warn of specific personal injury potential, and these will be designated by the symbol:

WARNING This generator is equipped with a grounding post, located on the control panel for your protection. Always complete the grounding path from the generator to a copper pipe/rod that is driven into moist earth, to prevent electrical shock.

ALWAYS use electrical cords that are in good condition. Worn, bare, frayed or otherwise damaged cords can cause electric shock.

NEVER operate the generator, or handle any electrical equipment while standing in water, while barefoot, while hands are wet or while in the rain or snow. Electric shock may result.

ALWAYS use a ground fault circuit interrupter (GFCI) in damp or highly electrical conductive areas and on construction job-sites to prevent electric shock.

8000 IPG specifications

The North Star 8000 IPG (Integrated Process Generator) stands out as a sophisticated solution in the realm of advanced industrial technology. Designed for various applications, including manufacturing and automation, it embodies a synergy of functionality, efficiency, and innovation.

One of the main features of the North Star 8000 IPG is its modular design, allowing companies to customize the unit according to their specific operational needs. This adaptability enhances its utility across multiple sectors, including automotive, aerospace, and electronics. Its modular components can be scaled or upgraded as technology evolves, ensuring longevity and relevance.

In terms of technology, the North Star 8000 IPG integrates cutting-edge digital processing capabilities. This technology streamlines operations by optimizing workflows and reducing downtime. The generator uses advanced algorithms and machine learning to analyze performance data, enabling predictive maintenance and real-time monitoring. This level of analytics ensures that users can identify issues before they escalate, thus minimizing interruptions in production.

Moreover, the North Star 8000 IPG features a highly efficient power management system. This system optimizes energy consumption by adjusting outputs based on the demand of the connected systems. By reducing energy waste, it offers significant cost savings while promoting environmentally responsible practices. The use of energy-efficient components aligns with global sustainability goals, making this generator a compelling choice for modern enterprises.

The design of the North Star 8000 IPG also emphasizes ease of use. Its user interface is intuitive, giving operators straightforward access to operational controls and settings. This user-centric approach reduces the learning curve for new employees and enhances overall productivity. Additionally, the system is designed for easy integration with existing industrial infrastructure, ensuring a smooth transition for companies upgrading their technology.

Safety is paramount in industrial operations, and the North Star 8000 IPG incorporates numerous safety features to protect both personnel and equipment. Built-in safety protocols and emergency shut-off mechanisms help mitigate risks associated with high-power operations.

Ultimately, the North Star 8000 IPG represents a remarkable fusion of advanced technology, flexibility, and safety. It empowers industries to enhance their processes, reduce operational costs, and achieve greater efficiency, making it an invaluable asset in the ever-evolving landscape of industrial automation.