Operation, Before Turning Gas Supply on

OPERATION

WARNING: DO NOT attempt to operate heater until you have read and understand all precautions. Failure to do so can result in serious personal injury, death or property damage.

Before Turning Gas Supply ON

Your heater was designed and approved for OUTDOOR USE ONLY. DO NOT use it inside a building, or any other enclosed area. Make sure surrounding areas are free of combustible materials, gasoline and other flammable vapors or liquids. Ensure that there is no obstruction to air ventilation. Be sure all gas connections are tight and there are no leaks. Be sure the access panel is clear of debris. Be sure any component removed during assembly or servicing is replaced and fastened prior to starting.

Before Lighting

Heater should be thoroughly inspected before each use, and by a qualified service person at least annually. If relighting, always wait at least 5 minutes.

This heater is tested for quality assurance. Ignition attempts should succeed 8 out of 10 attempts.

LIGHTING INSTRUCTIONS

1.Push and turn the control knob clockwise to the off position.

2.Fully open the propane tank valve or natural gas supply valve.

3.Push and turn the control knob counter-clockwise to the pilot position. Depress the control knob. Push and hold the igniter button until the pilot lights.

4.Once the pilot lights, release the igniter button and continue to depress the control knob for 30 seconds.

5.After depressing the control knob for 30 seconds, release the control knob and turn it

counter-clockwise to the low or high position.

Note: If the pilot light will not ignite, turn the control knob to the off position, and fully close the propane tank valve or natural gas supply valve. Wait 5 minutes and then repeat steps 2-4. Alternately, the pilot can be lit using a wand lighter. Push and turn the control knob to the pilot position. Depress the control knob. Insert the lit lighter through the ignition hole on the emitter screen. Once the pilot lights, remove the lighter and continue to depress the control knob for 30 seconds.

Whenever the unit is disconnected from the natural gas supply, the supply lines fill with air. Expect a delay in lighting the pilot, the first time the unit is lit after reconnecting.

INSTRUCTIONS D’ALLUMAGE

1.Poussez et tournez le bouton de réglage vers la droite à "off".

2.Ouvrez complètement la soupape du réservoir de propane ou de l'approvisionnement en gaz naturel.

3.Poussez et tournez le bouton de réglage vers la gauche à "pilot". Appuyez sur le bouton de réglage. enfoncez et maintenez l'allumeur jusqu'à ce que la veilleuse s'allume.

4.Une fois la veilleuse allumée, relâchez l'allumeur et continuez d'appuyer sur le bouton de réglage pendant 30 secondes.

5.Après avoir appuyé sur le bouton de réglage pendant 30 secondes, relâchez le bouton de réglage et tournez-le vers la gauche à "low" ou à "high".

WARNING

FOR YOUR SAFETY:

If at any time you are unable to light burner and smell gas, wait 5 minutes to allow gas to dissipate before attempting to light heater.

If after 1 minute you are unable to light burner, wait 5 minutes and allow flammable vapors to dissipate before attempting to light heater again.

WARNING

FOR YOUR SAFETY:

DO NOT touch or move heater for at least 45 minutes after use.

Allow emitter and dome to cool before touching.

				O
				FF
				P
				u
			T		s
	O		T		h
L	O				t
L					o
I					t
P					u
					r
					n
	L				H
			O	IG	H
			W	IG
				H
				O
				FF
				P
				u
			T		s
		O	T		h
L		O			t
L					o
I					t
P					u
					r
					n
		L			H
			O	IG	H
			W	IG
				H

Emitter Screen

Ignition Hole

Remarque : Si la veilleuse ne s'allume pas, tournez le bouton de réglage à "off" et fermez complètement la soupape du réservoir de propane ou de l'approvisionnement en gaz naturel. Attendez 5 minutes et répétez les étapes 2 à 4. Comme autre alternative, la veilleuse peut être allumée à l'aide d'un allumoir. poussez et tournez le bouton de réglage à "pilot". Appuyez sur le bouton de réglage. Insérez l'allumoir allumé dans l'orifice d'allumage sur l'émetteur grillagé. Lorsque la veilleuse s'allume, retirez l'allumoir et continuez d'appuyer sur le bouton de réglage pendant 30 secondes. lorsque l'appareil est débranché du réservoir de propane ou de l'approvisionnement en gaz naturel, les conduites d'alimentation se remplissent d'air. Un délai sera nécessaire pour allumer la veilleuse la première fois que l'appareil sera allumé après avoir été rebranché.

SRPH02S specifications

The Mr. Heater SRPH02S is a powerful and versatile portable propane heater designed to provide warmth in various outdoor and indoor settings. Renowned for its efficiency and user-friendly features, this heater is ideal for camping, construction sites, and emergency situations, making it a popular choice among outdoor enthusiasts and professionals alike.

One of the standout features of the SRPH02S is its impressive heating capacity. With a maximum output of 18,000 BTUs, it effectively heats spaces up to 450 square feet, ensuring comfort even in colder conditions. The heater utilizes propane as its fuel source, allowing for convenient refueling and the ability to operate in areas lacking electrical outlets. This portability makes it an optimal heating solution for both temporary and semi-permanent setups.

The SRPH02S is equipped with a unique radiant heating technology that ensures efficient heat projection. This technology radiates warmth in a directed manner, allowing users to feel the heat more quickly and effectively. Furthermore, the adjustable heat settings provide flexibility, enabling users to customize the temperature based on their needs.

Safety is a paramount consideration in the design of the SRPH02S. The heater comes with an automatic low oxygen shut-off system (ODS), which detects when oxygen levels become too low and shuts off the unit to prevent potential hazards. Additionally, the heater features a tip-over safety shut-off, which turns off the heater if it is knocked over, further enhancing user safety.

In terms of construction, the Mr. Heater SRPH02S is built to withstand the rigors of outdoor use. The durable metal housing and components ensure longevity, while the compact and lightweight design makes it easy to transport. The foldable handle and removable propane tank cylinder add to its portability, making storage and transportation hassle-free.

Another significant characteristic of the SRPH02S is its quiet operation. Unlike traditional space heaters, the Mr. Heater operates with minimal noise, allowing users to enjoy a warm environment without disruptive sounds.

In summary, the Mr. Heater SRPH02S combines powerful heating capabilities, advanced technology, and essential safety features into a compact and portable design. Whether for camping trips, workshops, or emergency heating needs, the SRPH02S stands out as a reliable choice for keeping warm in a variety of settings.

				O
				FF
				P
				u
			T		s
	O		T		h
L	O				t
L					o
I					t
P					u
					r
					n
	L				H
			O	IG	H
			W	IG
				H
				O
				FF
				P
				u
			T		s
		O	T		h
L		O			t
L					o
I					t
P					u
					r
					n
		L			H
			O	IG	H
			W	IG
				H

				O
				FF
				P
				u
			T		s
	O		T		h
L	O				t
L					o
I					t
P					u
					r
					n
	L				H
			O	IG	H
			W	IG
				H
				O
				FF
				P
				u
			T		s
		O	T		h
L		O			t
L					o
I					t
P					u
					r
					n
		L			H
			O	IG	H
			W	IG
				H

				O
				FF
				P
				u
			T		s
	O		T		h
L	O				t
L					o
I					t
P					u
					r
					n
	L				H
			O	IG	H
			W	IG
				H
				O
				FF
				P
				u
			T		s
		O	T		h
L		O			t
L					o
I					t
P					u
					r
					n
		L			H
			O	IG	H
			W	IG
				H