Mono, Record Monitor, Output 1 | McIntosh C220 specification

Figure 18

How to Operate the C220

Mono

Press the Front Panel MONO Push-button or the MODE Push-button on the Remote Control to combine left and right stereo signals to a Monophonic Signal. The Front Panel LED will illuninate indicating the MONO Mode is active. The C220 automatically stores into memory for each Input, the Selection of the Stereo or Mono Mode.

Note: The signals at the TAPE OUT Jacks are not affected.

Record Monitor

Press the REC MONITOR Push-button to hear the TAPE/ REC Playback Signal during the recording process.

Setup

Pressing the SETUP Push-button activates the Setup Mode of the C220 and allows customizing various operating functions. Refer to page 14 for additional information.

Mute

Press the MUTE Push-button, on the C220 Front Panel or on the Remote Control, to Mute the Audio at the OUT- PUTS Connectors and HEADPHONES Output Jack. The Front Panel Alphanumeric Display will indicate the Input Source Name followed by the word MUTE in place of the actual volume setting. Refer to figure 15.

Pressing the Mute Push-button a second time or adjust- ing the volume control (either the Front Panel or Remote Control) will un-mute the C220.

Figure 15

If the Front Panel MUTE Push-button is pressed for at least 3 seconds, the C220 will mute the OUTPUTS con- nectors, yet listening with headphones will continue until the Mute Push-button is pressed again for 3 seconds. The Front Panel Alphanumeric Display will indicate the Input Source Name, Volume Setting and a Dot. Refer to figures 16 and 17.

Figure 16

Figure 17

Output 1 and 2

Press the HOME Push-button followed by the SPKR 1 or 2 Push-buttons to send audio to separate Power Amplifiers con- nected to the rear panel OUT- PUTS 1 or 2 Jacks. It also acti- vates the POWER CONTROL SPKR 1 & SPKR 2 Jacks on the rear panel of the C220. To stop the Audio and Power Control Signals from going to the sepa- rate Power Amplifiers, press the HOME Push-button followed by the SPKR 1 or 2 Push-buttons.

Headphones Jack Connect a pair of dynamic headphones with a 1/4” (0.64cm) stereo phone type plug to the Headphones Jack for private listening.

How To Make A Tape Record- ing

1. Select the signal you wish to record.

2. Adjust the record level using the recorder volume control and proceed with the record- ing process.

3.To listen to the playback of the

program source just recorded, press the RECord MONI- TOR Push-button.

Note: The C220 TAPE OUTPUTS are not affected by the VOLUME or BALANCE controls.

Reset of Microprocessors

In the unlikely event the controls of the C220 stop func- tioning, the microprocessors can be reset by performing the following:

1.Press and hold in the STANDBY/ON Push-button for approximately five seconds.

2.When the C220 cycles On then Off, release the STANDBY/ON Push-button.

3.When the STANDBY/ON LED is illuminated press the STANDBY/ON Push-button, the C220 will resume normal operation.

Note: This can be performed with the C220 On or in the Standby Mode.

C220 specifications

The McIntosh C220 is a high-performance preamplifier that embodies the brand's legacy of premium audio equipment, delivering an exceptional listening experience. Renowned for its remarkable sound quality and robust build, the C220 is designed for both audiophiles and music enthusiasts.

One of the standout features of the McIntosh C220 is its advanced audio circuitry. Utilizing a fully balanced design, the preamplifier minimizes noise and distortion by maintaining a symmetrical signal path. This design not only enhances sound clarity but also ensures that the C220 delivers an incredibly dynamic range, capturing the intricate details of recordings. With an impressive frequency response of 20Hz to 20kHz, listeners can expect a faithful reproduction of high and low frequencies.

The C220 is equipped with multiple inputs, including both analog and digital connections, accommodating a wide array of audio sources. It features six analog inputs, an eight-channel digital input via the USB port, and a Bluetooth option, allowing for seamless connectivity with modern devices. This versatility makes it a valuable addition to any audio system, enabling users to enjoy their favorite music from various sources.

Additionally, the McIntosh C220 incorporates the brand's famous AutoFormer technology. This innovative feature allows users to connect their speakers to the preamp while ensuring the highest level of performance and protection. The AutoFormer adjusts the speaker impedance, providing optimal power transfer and exceptional audio quality, regardless of the speakers used.

Another crucial aspect of the C220 is the dual analog VU meters. These iconic meters not only add an aesthetic appeal but also provide real-time feedback on the audio signal level, allowing users to monitor their settings visually. This feature enhances the overall experience, especially in a home audio setup.

The build quality of the McIntosh C220 further reinforces its stature. With a sleek, classic design featuring a glass front panel, aluminum chassis, and robust components, this preamplifier is not just functional but also a visually striking piece of equipment.

In summary, the McIntosh C220 combines advanced technology with timeless design, delivering impressive sound quality and versatility. Whether you’re a casual listener or an audio purist, the C220 serves as an outstanding centerpiece for any high-fidelity audio system. Its rich feature set, including multiple inputs, balanced audio circuitry, and beautiful aesthetic, solidifies its status as a premier choice in the world of audio preamplifiers.