MTD 769-03096A warranty Briggs & Stratton/MTD OHV Engine, To Stop Engine, Using Your Lawn Mower

Page 9

4. Grasp the starter handle as shown and pull slowly until resistance is felt, then pull rapidly to start engine and avoid kickback. Return it slowly to the rope guide.

Briggs & Stratton/MTD OHV Engine:

1. Prime or choke engine as instructed in the separate engine manual packed with your unit.

2. Standing behind the unit, depress the blade control handle and hold it against the upper handle as shown in Figure 4-3.

3. Grasp the starter handle as shown and pull slowly

 

until resistance is felt, then pull rapidly to start engine



and avoid kickback. Return it slowly to the rope guide.

WARNING: Wait for the blade to stop completely before performing any work on the mower or to remove the grass catcher.



/&&

/.



4

Operating

Your Lawn

Mower

To Stop Engine

Figure 4-2

 

1.Release the blade control handle to stop the engine and blade.

WARNING: The blade continues to rotate for a few seconds after the engine is shut off.

2.Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent accidental starting while equipment is unattended.

Using Your Lawn Mower

WARNING: Never operate your mower without ei- ther the rear door or the entire grass catcher assembly firmly secured.

Be sure the lawn is clear of stones, sticks, wire, or other objects which could damage the lawn mower or the engine. Such objects could be ac-

cidently thrown by the mower in any direction and cause serious personal injury to the operator and others.

WARNING: If you strike a foreign object, stop the engine. Remove wire from the spark plug, thoroughly inspect the mower for any damage, and repair the damage before restarting and operating the mower. Extensive vibration of the mower during operation is an indication

of damage. The unit should be promptly inspected and repaired.

Operating Tips

1.For best results and effective mulching, do not cut wet grass.

2.New grass, thick grass, or wet grass may require a narrower cut.

2

3

Figure 4-3

3.For a healthier lawn, never cut off more than one- third of the total length of the grass.

4.Your lawn should be cut in the fall as long as there is growth.

5.Adjust ground speed according to condition of lawn.

6.If the grass has been allowed to grow in excess of 4 inches, mulching is not recommended. Mow using the grass catcher to reduce the grass height to 3-1/4 inches or less before mulching.

WARNING: Wait for the blade to stop completely before doing any work on the mower or to remove the grass catcher.

NOTE: To operate your unit using the grass catcher, mulcher or optional side discharge refer to page 7.

WARNING

The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while perform- ing any adjustments or repairs on it.

Be sure no one other than the operator is standing near the lawn mower while starting engine or operating mower. Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing away from any moving parts on engine and lawn mower.



Image 9
Contents Rotary Mower Model Series OPERATOR’S ManualTable of Contents Finding and Recording Model NumberCustomer Support Slope Gauge Your Responsibility General OperationSlope Operation Service General ServiceChildren Setup Adjustments Adjustments Know Your Lawn Mower Operating Your Lawn MowerBriggs & Stratton/MTD OHV Engine Using Your Lawn MowerTo Stop Engine Operating TipsMaintenance Blade Mounting Torque Rear Flap ReplacementProblem Cause Remedy Trouble ShootingTWO Year Limited Warranty WarrantyWheel Treads OHVFor parts and/or accessories refer to customer support on Parts List Pièces DétachéesAdressez-vous au «Service après-vente» La page 2 pour ce qui concerne les pièces et/ou accessoiresANS Deux DE Limitée Garantie GarantieDépannage Solution Cause ProblèmeEntretien Général d’ordre Recommandations Lame la de remplacement et EntretienCoupe de Plateau Moteur’utilisation Conseil UtilisationTondeuse la de Utilisation Moteur du ArrêtLanceur à Démarreur CommandesSetup Position Adjustments and SetupEnfant Général EntretienResponsabilité Votre Pente une sur UtilisationGénéral en Utilisation Arbre InclinomètreVente après service au d’abord adresser vous sans Vente-après ServiceModèle de numéro le trouver Pour Matières des Table400 Séries Rotative Tondeuse po ’UTILISATION Notice

769-03096A specifications

The MTD 769-03096A is a powerful and versatile lawn mower attachment designed to enhance lawn care efficiency. This innovative product is primarily utilized with various MTD lawn mower models, bringing advanced technology and user-friendly features to the forefront of gardening equipment.

One of the standout features of the MTD 769-03096A is its durable construction, which ensures long-lasting performance even in tough mowing conditions. Made from high-quality materials, this attachment is engineered to withstand the wear and tear often associated with outdoor use. Its robust build makes it capable of tackling thick grass and overgrown areas, making it an ideal choice for homeowners and landscaping professionals alike.

The technology behind the MTD 769-03096A includes a powerful cutting mechanism that promotes efficient grass cutting. Its precision-engineered blades are designed to provide a clean and even cut, which is essential for maintaining a healthy lawn. With a cutting width that allows for broad coverage, users can complete their mowing tasks in less time, ultimately increasing productivity.

In addition to its cutting capability, the MTD 769-03096A emphasizes ease of use. Its quick-connect mount system allows for easy attachment and detachment from compatible lawn mowers, saving valuable time during maintenance tasks. Additionally, the design incorporates an adjustable cutting height feature, enabling users to tailor their mowing height according to specific lawn needs. This adaptability is essential for promoting optimal grass health and appearance.

Another notable characteristic is the attachment's lightweight design, which contributes to ease of maneuverability. Even in challenging terrain, users can navigate their lawn with minimal effort, reducing fatigue during extended mowing sessions.

Furthermore, the MTD 769-03096A is compatible with a wide range of MTD mower models, adding to its versatility. This compatibility ensures that users who already own MTD equipment can easily integrate this attachment into their existing setup.

In conclusion, the MTD 769-03096A lawn mower attachment stands out for its durable construction, advanced cutting technology, user-friendly features, and versatility. Whether for residential or professional use, this attachment represents a valuable tool for effective lawn maintenance, catering to the needs of a wide range of users. Its ability to provide a clean cut, adjust cutting heights, and connect easily with various mowers makes it a noteworthy addition to the MTD product line.