MTD 500 Series warranty To Start Engine, To Stop Engine, Using Your Lawn Mower, Operating Tips

Page 9





/&&

/.



Figure 10

b.If it does not the clutch may not be releasing completely. Do not start the engine until correc- tions have been made. Check the control cable for severe bend, kinks and binding. Also check for grass build-up around the belt.

To Start Engine

1.If your unit is equipped with a primer, choke or fuel valve lever operate as instructed in the separate engine manual packed with your unit.

2.Standing behind the unit, depress the blade control handle and hold it against the upper handle as shown in Figure 10.

3.Grasp the starter handle as shown and pull slowly until resistance is felt, then pull rapidly to start engine and avoid kickback. Return it slowly to the rope guide.

To Stop Engine

1.Release the blade control handle to stop the engine and blade.

WARNING: The blade continues to rotate for a few seconds after the engine is shut off.

2.Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent accidental starting while equipment is unattended.

Using Your Lawn Mower

Be sure the lawn is clear of stones, sticks, wire, or other objects which could damage the lawn mower or the engine. Such objects could be accidently thrown by the mower in any direction and cause serious personal injury to the operator and others.

WARNING: If you strike a foreign object, stop the engine. Remove wire from the spark plug, thor- oughly inspect the mower for any damage, and repair the damage before restarting and operating the mower. Extensive vibration of the mower during operation is an indication of damage. The unit should be promptly inspected and repaired.

Operating Tips

1.To engage the drive, squeeze the drive control handle towards the upper handle. Release the drive control to slow down when negotiating an obstacle, making a turn, or stopping.

2.For best results do not cut wet grass.

3.New grass, thick grass, or wet grass may require a narrower cut.

4.For a healthier lawn, never cut off more than one-third of the total length of the grass.

5.Your lawn should be cut in the fall as long as there is growth.

6.If the grass has been allowed to grow in excess of 4 inches, mulching is not recommended. Mow using the side discharge to reduce the grass height to 3-1/4 inches or less before mulching.

General Recommendations

1.Always observe safety rules when performing any maintenance.

2.The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from warranty, operator must maintain the lawn mower as instructed here.

3.Changing of engine-governed speed will void engine warranty.

4.All adjustments should be checked at least once each season.

5.Periodically check all fasteners and make sure these are tight.

NOTE: To operate your unit using the grass catcher, mulcher or optional side discharge refer to page 7.

4

Operating

Your Lawn

Mower

WARNING

The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.

Be sure no one other than the operator is standing near the lawn mower while starting engine or operating mower. Never run engine indoors or

in enclosed, poorly ventilated areas. En- gine exhaust contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing away from any moving parts on engine and lawn mower.

Image 9
Contents 11/12/07 Self-Propelled Rotary Mower Model SeriesTable of Contents Finding and Recording Model NumberCustomer Support Slope Gauge Your Responsibility General OperationSlope Operation Service General ServiceChildren Setup Adjustment Adjustments Cutting HeightDrive Control Know Your Lawn Mower Operating Your Lawn MowerTo Start Engine Using Your Lawn MowerTo Stop Engine Operating TipsMaintenance Tighten the hex bolt to the torque listed below Belt CareBlade Mounting Torque Center Bolt 450 in. lb. min., 600 in.lb. maxProblem Cause Remedy Trouble Shooting06.18.06 WarrantyWheel Treads For parts and/or accessories refer to customer support on Parts List Pièces DétachéesAdressez-vous au «Service après-vente» La page 2 pour ce qui concerne les pièces et/ou accessoiresPage 12AG563Q Page Frottement GarantieDépannage Solution Cause ProblèmeSaison hors Remisage EntretienCourroie la de Entretien ’utilisateurArrière déflecteur du Remplacement Lame la de remplacement et EntretienCoupe de Plateau Moteur’utilisation Conseil UtilisationLanceur à Démarreur Coupe de hauteur la de réglage de LeviersCourroie ’essence plein le jamais faites NeRéglages ’entraînement CommandePosition Enfant Général EntretienResponsabilité Votre Pente une sur UtilisationGénéral en Utilisation Arbre InclinomètreVente après service au d’abord adresser vous sans Vente-après ServiceModèle de numéro le trouver Pour Matières des TableImportant 5 Séries motrice-auto rotative Tondeuse po ’UTILISATION Notice

500 Series specifications

The MTD 500 Series is a remarkable addition to the world of machinery, built to deliver superior performance and reliability in a range of applications. This series is designed with a focus on efficiency and ease of use, making it an ideal choice for both professional landscapers and dedicated homeowners.

One of the main features of the MTD 500 Series is its powerful engine lineup, which includes a variety of engine types tailored to meet diverse operational needs. The engines are designed to deliver excellent torque and fuel efficiency, ensuring that users can complete their tasks efficiently without incurring high fuel costs. With easy-start technologies, starting the machine is a breeze, allowing users to get to work with minimal downtime.

The MTD 500 Series also boasts advanced cutting technology. The precision-engineered blades are designed for optimal cutting performance, providing a clean and even finish on the lawn. Moreover, the innovative deck design allows for superior grass collection, reducing the need for additional cleanup. Users can choose from multiple cutting heights, enabling them to adapt to different lawn conditions and preferences.

In terms of ergonomics and user comfort, the MTD 500 Series is designed with adjustable handles and easy-to-reach controls. This ensures that users can operate the equipment without strain, making it suitable for extended use. Additionally, the lightweight construction of the machines enhances maneuverability, allowing users to navigate around obstacles effortlessly.

Safety is also a prominent characteristic of the MTD 500 Series. The machines come equipped with features like blade stop mechanisms and robust safety guards to protect users during operation. These safety features ensure that the machines can be operated confidently, minimizing the risk of accidents.

Furthermore, the MTD 500 Series incorporates advanced materials and technologies to enhance durability. The heavy-duty construction ensures that the machines can withstand the rigors of demanding tasks while maintaining consistent performance over time. This durability translates to lower maintenance needs, allowing users to focus on their work rather than frequent repairs.

Overall, the MTD 500 Series stands out for its powerful performance, innovative cutting technology, ergonomic design, safety features, and durability. It is a versatile choice for anyone looking to maintain a pristine lawn or tackle outdoor tasks efficiently.