MTD 440 Thru E459 manual Slope Operation, Do not, Children, Service

Page 4

•The blade control handle is a safety device. Never attempt to bypass its operation. Doing so makes the safety device inoperative and may result in personal injury through contact with the rotating blade. The blade control handle must operate easily in both directions and automatically return to the disengaged position when released.

•Never operate the mower in wet grass. Always be sure of your footing. A slip and fall can cause serious personal injury. Keep a firm hold on the handle and walk, never run. If you feel you are losing your footing, RELEASE THE BLADE CONTROL HANDLE IMMEDIATELY and the blade will stop rotating within three seconds.

•Mow only in daylight or good artificial light.

•Stop the blade when crossing gravel drives, walks or roads.

•If the equipment should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble.

•Shut the engine off and wait until the blade comes to a complete stop before removing the grass catcher or unclogging the chute. The cutting blade continues to rotate for a few seconds after the engine is shut off. Never place any part of the body in the blade area until you are sure the blade has stopped rotating.

•Never operate mower without proper guards, grass catcher, plates or other safety protective devices in place.

•Muffler and engine become hot and can cause a burn. Do not touch.

•Only use accessories approved for this machine by the manufacturer. Read, understand, and follow all instructions provided with the approved accessory.

•If situations occur which are not covered in this manual, use care and good judgment. Contact your dealer for assistance.

SLOPE OPERATION

For your safety, use the slope gauge included as part of this manual to measure slopes before operating this unit on a sloped or hilly area. If the slope is greater than 15 degrees as shown on the slope gauge, do not operate this unit on that area or serious injury could result.

DO:

•Mow across the face of slopes; never up and down. Exercise extreme caution when changing direction on slopes.

•Watch for holes, ruts, hidden objects, or bumps. Tall grass can hide obstacles.

•Always be sure of your footing. A slip and fall can cause serious personal injury. If you feel you are losing your balance release the blade control handle immediately and the blade will stop in less than 3 seconds.

DO NOT:

•Do not mow near drop-offs, ditches or embankments. The operator could lose footing or balance.

•Do not mow slopes greater than 15 degrees as shown on the slope gauge.

•Do not mow on wet grass. Reduced footing could cause slipping.

CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the mower and the mowing activity. Never assume that children will remain where you last saw them.

•Keep children out of the mowing area and under the watchful care of a responsible adult other than the operator.

•Be alert and turn mower off if a child enters the area.

•Before and while moving backwards, look behind and down for small children or other objects.

•Never allow children under age 14 to operate the mower. Children 14 years of age and above should read and understand the operation instructions and safety rules in this manual.

•Use extreme care when approaching blind corners, shrubs, trees, or other objects that may obscure your vision of a child or hazard.

SERVICE

•Use extreme care in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive.

•Use only an approved gasoline container.

•Never remove gas cap or add fuel while the engine is running. Allow engine to cool at least two minutes before refueling.

•Replace gasoline cap securely and wipe off any spilled gasoline before starting the engine as it may cause a fire or explosion.

•Extinguish all cigarettes, cigars, pipes and other sources of ignition.

•Never refuel machine indoors because flammable vapors will accumulate in the area.

•Never store the machine or fuel container inside where there is an open flame or spark such as a gas water heater, space heater, or furnace.

•Never run an engine inside a closed area.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operator’s Manual Finding Model Number Table of ContentsCalling Customer Support Important Safe Operation Practices General OperationService Slope OperationDo not ChildrenPage Slope Gauge Disconnecting Spark Plug UnpackingAssembling Your Lawn Mower Removing Unit From CartonGrass Catcher Assembly Attaching Starter RopeSoft Grass BAG Assemble soft grass bag as followsHardtop Grass BAG Parts for Hardtop Grass BagAttaching Grass Catcher Removing the Grass CatcherOptional Chute Deflector Attaching Chute DeflectorKnow Your Lawn Mower Charging the Battery Operating Your Lawn MowerGas And Oil Fill-Up Before Starting MowerUsing Your Lawn Mower Adjusting Cutting HeightStarting Engine Stopping EngineCleaning Mower Engine MaintenanceMaintaining Your Lawn Mower LubricationService and Making Adjustments In-line Fuse Electric Start Only Adjusting Drive Clutch ControlReplacing Drive Belt Adjusting Handle Height Adjusting CarburetorStorage Of The Battery MowerEngine OtherTROUBLE-SHOOTING Guide Parts List for Model 440 Thru E450 Series Models 440 Thru E450 Series 39 33 41 37 4419 2046 Ball Bearing 2631 914 Description Engine Shrouds MANUFACTURER’S Limited Warranty for

440 Thru E459 specifications

The MTD 440 through E459 series represents a significant advancement in the realm of mid-range tractors, tailored for both agricultural and industrial applications. This series encapsulates a blend of power, efficiency, and advanced technology, making it a preferred choice for farmers and professionals alike.

One of the standout features of the MTD 440 to E459 series is its robust engine performance. The series is equipped with a high-efficiency, four-stroke diesel engine that boasts increased torque and horsepower while maintaining excellent fuel economy. This powertrain is designed to handle demanding tasks, whether it's plowing, tilling, or moving heavy loads. The engines are also compliant with global emission standards, ensuring that they contribute to a cleaner environment.

In addition to its powerful engines, the series showcases advanced transmission options. The MTD tractors come with a choice of manual and hydraulic gear systems, providing operators with flexibility and control. The intuitive design of the gear shifting mechanism enhances ease of use, allowing for smooth transitions between gears, which is particularly beneficial during complex agricultural tasks.

The MTD 440 through E459 series also incorporates cutting-edge technologies that enhance user experience. One notable feature is the integrated smart display dashboard, which offers real-time monitoring of crucial parameters such as fuel levels, engine temperature, and diagnostic alerts. This allows operators to maintain optimal performance and address any issues before they escalate.

Comfort and ergonomics are also priorities in the design of this series. The spacious cabin provides excellent visibility and is equipped with adjustable seating, climate control, and noise-reducing features to ensure a pleasant working environment, even during long hours of operation. Additionally, the tractors come with user-friendly controls that are easily accessible, enabling operators to focus on their tasks without distraction.

The durability of the MTD 440 to E459 series cannot be overstated. Constructed with high-quality materials, these tractors are built to withstand harsh working conditions. Features such as reinforced chassis, improved suspension systems, and weather-resistant components contribute to their longevity and reliability in the field.

Safety is another critical aspect of the MTD series. These tractors come equipped with essential safety features such as roll-over protective structures (ROPS), multiple braking systems, and well-designed lighting for improved visibility during nighttime operations.

In summary, the MTD 440 through E459 series combines power, efficiency, and advanced technology to deliver an exceptional mid-range tractor solution. With its robust engine performance, versatile transmission options, user-friendly technology, comfort features, and solid safety measures, it stands out as a reliable choice for those in need of a dependable agricultural or industrial machine.
Top Page Image Contents