MTD 1842, 1438 warranty Children, Towing, Safe Handling of Gasoline, General Service

Page 5

Children

1.Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. They do not understand the dangers. Never assume that children will remain where you last saw them.

a.Keep children out of the mowing area and in watchful care of a responsible adult other than the operator.

b.Be alert and turn machine off if a child enters the area.

c.Before and while backing, look behind and down for small children.

d.Never carry children, even with the blade(s) shut off. They may fall off and be seriously injured or interfere with safe machine operation.

e.Use extreme care when approaching blind corners, doorways, shrubs, trees or other objects that may block your vision of a child who may run into the path of the machine.

f.To avoid back-over accidents, always disengage the cutting blade(s) before shifting into Reverse. If equipped, the “Reverse Caution Mode” should not be used when children or others are around.

g.Keep children away from hot or running engines. They can suffer burns from a hot muffler.

h.Remove key when machine is unattended to prevent unauthorized operation.

2.Never allow children under 14 years of age to operate this machine. Children 14 and over should read and understand the instructions and safe operation practices in this manual and on the machine and should be trained and supervised by an adult.

Towing

1.Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2.Follow the manufacturers recommendation for weight limits for towed equipment and towing on slopes.

3.Never allow children or others in or on towed equipment.

4.On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5.Always use extra caution when towing with a machine capable of making tight turns (e.g. “zero-turn” ride-on mower). Make wide turns to avoid jack-knifing.

6.Travel slowly and allow extra distance to stop.

7.Do not shift to neutral and coast downhill.

Service

Safe Handling of Gasoline:

1.To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes which can ignite. Wash your skin and change clothes immediately.

a.Use only an approved gasoline container.

b.Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

c.When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

d.Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

e.Extinguish all cigarettes, cigars, pipes and other sources of ignition.

f.Never fuel machine indoors.

g.Never remove gas cap or add fuel while the engine is hot or running. Allow engine to cool at least two minutes before refueling.

h.Never over fill fuel tank. Fill tank to no more than ½ inch below bottom of filler neck to allow space for fuel expansion.

i.Replace gasoline cap and tighten securely.

j.If gasoline is spilled, wipe it off the engine and equipment. Move machine to another area. Wait 5 minutes before starting the engine.

k.To reduce fire hazards, keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

l.Never store the machine or fuel container inside where there is an open flame, spark or pilot light as on a water heater, space heater, furnace, clothes dryer or other gas appliances.

m.Allow a machine to cool at least five minutes before storing.

General Service

1.Never run an engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless, and deadly gas.

2.Before cleaning, repairing, or inspecting, make certain the blade(s) and all moving parts have stopped. Disconnect the spark plug wire and ground against the engine to prevent unintended starting.

Section 2 — Important Safe Operation Practices

5

Image 5
Contents Operator’s Manual To The Owner Table of ContentsThank You Record Product InformationCalifornia Proposition General Operation Important Safe Operation PracticesDo Not Slope OperationGeneral Service ServiceChildren TowingSpark Arrestor Do not modify engineSymbol Safety SymbolsImportant Safe Operation Practices Shipping Brace Removal Assembly & Set-UpTractor Set-Up Connecting the Battery Cables Attaching The Seat Attaching The Steering WheelAttaching The Dash Collar Tire Pressure Setting the Deck Gauge Wheels if so equippedGas and Oil Fill-up For California ModelsOn some models Controls and FeaturesPosition Ignition Switch Ignition SwitchThrottle Control Lever Choke ControlParking Brake Clutch-Brake PedalShift Lever Speed Control LeverOperation Safety Interlock SwitchesReverse Caution Mode Engaging the Parking Brake Setting the Cutting HeightStarting the Engine Stopping the EngineDriving The Tractor Using the Deck Lift LeverDriving On Slopes Engaging the BladesHeadlights MowingMulching Lubrication Maintenance & AdjustmentsMaintenance Cleaning Battery Cleaning the Engine And DeckBattery Failures Deck Wash SystemSeat Adjustment AdjustmentsParking Brake Adjustment Leveling the Deck Front To RearClean Hood/Dash Louvers Check Engine Oil Level Maintenance ScheduleCutting Deck Removal ServiceTires BatteryFuse ChargingCutting Blades Jump StartingChanging the Transmission Drive Belt Changing the Deck BeltFor 38 Decks For 42 & 46 Decks42 & 46-Inch Deck Inch DeckProblem Cause Remedy TroubleshootingDescription Replacement PartsModel Number Description Attachments & Accessories

1842, 1438 specifications

MTD 1438 and MTD 1842 are part of the MTD product line, which is known for, providing reliable and efficient solutions in the agricultural and gardening sectors. These models stand out due to their performance features, technology integrations, and user-friendly characteristics, making them suitable for both professionals and enthusiasts.

The MTD 1438 is a compact, versatile lawn tractor designed for small to medium-sized lawns. It is powered by a robust 14.5 HP engine that delivers reliable performance. One of its main features is the 38-inch cutting deck, which allows for a clean and efficient cut. The deck height can be easily adjusted to achieve the desired grass length, catering to various mowing conditions. The tractor also features a durable steel frame, which enhances stability and extends the lifespan of the machine.

In terms of technology, the MTD 1438 is equipped with an automatic transmission that simplifies operation, allowing users to focus on mowing rather than shifting gears. The user-friendly dashboard provides essential information at a glance, ensuring that users can monitor their machine’s performance without any hassle.

On the other hand, the MTD 1842 offers additional power and capabilities, making it suitable for larger lawns or more rugged landscapes. With a 18 HP engine, this model features a wider 42-inch cutting deck, allowing for increased efficiency by covering more ground in less time. It also maintains an adjustable cutting height, giving users flexibility in managing grass lengths across different terrains.

One of the standout characteristics of the MTD 1842 is its hydrostatic transmission. This technology offers seamless speed control, enabling smoother acceleration and easier navigation around obstacles. The tractor also features a comfortable seat and an ergonomic steering wheel, enhancing the overall user experience during longer mowing sessions.

Both models prioritize durability and ease of maintenance. They come with easy-access maintenance points, making it simple for users to keep their machines in top condition. Additionally, the design of both tractors allows for simple attachment of various accessories, such as baggers or mulching kits, increasing their versatility.

In summary, MTD 1438 and MTD 1842 are excellent choices for those seeking robust, efficient lawn care solutions. With their powerful engines, user-friendly technologies, and durable designs, these models offer reliability and performance that can meet a variety of landscaping needs. Whether tackling small yards or larger properties, these tractors provide the tools necessary for achieving a pristine lawn.