M&S Systems WS5 owner manual Bracket refer to Figure

Page 5

bracket (refer to Figure 1).

Figure 1—Mounting bracket installation

C O N N E C T I N G Y O U R S P E A K E R S

The WS5 speakers come with 5-way, gold plated, binding posts. The binding posts are color-coded for polarity—red is positive (+) and black is negative (-). Follow the steps below for connecting your WS5 speakers:

1.Turn off the receiver or amplifier and unplug it from the power outlet.

2.Use a 2-conductor 16-gauge speaker wire (M&S part number MS16X5) for runs up to 100 feet. For additional information on speaker wire runs contact our Technical Support team at 1-800-366-9422.

NOTE: REMOVE ABOUT 2 INCHES OF THE OUTSIDE JACKET FROM BOTH ENDS OF THE WIRE THEN STRIP APPROXIMATELY

½INCH OF THE INSULATION FROM EACH CONDUCTOR AT THE SPEAKER END. USE THE RECOMMENDED STRIP LENGTH AS SPECIFIED IN THE AMPLIFIER/RECEIVER INSTALLATION MANUAL