GETTING STARTED
SETTING UP THE TRANSMITTER
The 900MHz wireless transmitter works with a wide variety of audio sources, from portable MP3 players to A/V receivers to DVD players or gaming systems. The way you set it up depends on the kind of output you want to use on your audio source.
To connect the transmitter to your audio source:
3 | 1 |
|
2
Transmitter (back panel)
If your audio source has stereo RCA outputs: Connect the red and white plugs of a stereo Y adapter cable (not included) to the audio source’s line out jacks. Connect the other end of the stereo Y adapter cable to the transmitter’s
1.Plug the transmitter’s
2.Connect the AC power adapter to the Power In jack on the transmitter’s back panel.
3.Plug the adapter into an electrical outlet.
Important: This power unit is intended to be correctly oriented in a vertical or floor mount position.
Note:
6