MTD 50 manual Maintaining Your Lawn Mower, General Recommendations, Lubrication, Cleaning Mower

Page 12

SECTION 6: MAINTAINING YOUR LAWN MOWER

General Recommendations

Always observe safety rules when performing any maintenance.

The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain the lawn mower as instructed here.

Changing of engine-governed speed will void engine warranty.

All adjustments should be checked at least once each season.

Periodically check all fasteners and make sure these are tight.

WARNING: Always stop engine, disconnect spark plug, and ground against engine before cleaning, lubricating or doing any kind of maintenance on your machine.

Lubrication

(See Figure 15)

Blade Control Handle

Lubricate the pivot points on the blade control handle at least once a season with light oil. The blade control must operate freely in both directions. See Figure 15.

Wheels

If the wheels are removed for any reason, lubricate the surface of the pivot arm axle and inner surface of the wheel with light oil.

Chute Deflector

Lubricate the torsion spring and pivot point periodically with light oil to prevent rust. See Figure 15.

Engine

Follow the accompanying engine manual for lubrication schedule and instruction.

Cleaning Mower

Lubricate these

points

Lubricate these

points

Figure 15

Clean underside of the mower deck after each use to prevent build-up of grass clippings or other debris. Follow the steps below for this job.

NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit. These may cause damage to the engine. The use of water will result in shortened life and reduce serviceability.

1.Disconnect spark plug wire. Drain gasoline from the lawn mower, or place a piece of plastic under the gas cap.

2.Tip the mower so that it rests on the housing. Keep the side with the air cleaner facing up. Hold the mower firmly.

WARNING: Never tip the mower more than 90 degrees in any directions and do not leave the mower tipped for any length of time. Oil can drain into the upper part of the engine causing a starting problem.

3.Scrape and clean the underside of the deck with a suitable tool. Do not spray with water.

4.Put the mower back on its wheels on the ground. If you had put plastic under the gas cap earlier, make sure to remove it now.

12

Image 12
Contents Operator’s Manual Table of Contents Important Safe Operation Practices General OperationService Slope OperationChildren Your ResponsibilitySlope Gauge Spark Plug Wire Assembling Your Lawn MowerUnpacking Loose Parts Hardware PackAttaching Lower Handle Attaching Upper HandleAttaching Blade Control Handle Attaching Brake CableAttaching Wheels Attaching Chute DeflectorAttaching Starter Rope Operating Your Lawn Mower Know your lawn mowerGas & Oil Fill-Up Before StartingUsing Your Lawn Mower Starting EngineStopping Engine Operating TipsMaking Adjustments Cutting HeightHandle Height Cleaning Mower Maintaining Your Lawn MowerGeneral Recommendations LubricationBlade Care Off-Season StorageTroubleshooting Problem Cause RemedyPage Parts List for Series Series Page Page MANUFACTURER’S Limited Warranty for

50 specifications

The MTD 50 is a versatile and robust garden tractor designed primarily for residential use, catering to homeowners who require efficient lawn maintenance. This tractor combines power and ease of use, making it an ideal choice for gardening enthusiasts and landscaping professionals alike.

One of the standout features of the MTD 50 is its powerful engine. Equipped with a reliable 20 HP V-twin engine, it provides the necessary torque for tough mowing tasks while ensuring smooth operation. The engine is designed for fuel efficiency, allowing users to cover large areas without frequent refueling.

The MTD 50 showcases an innovative cutting deck system. With a 50-inch cutting width, it can handle expansive lawns and reduce mowing time significantly. The deck also features three high-performance blades that deliver a clean and even cut. The adjustable cutting height allows users to customize their lawn length, suitable for different seasons and grass types.

In terms of maneuverability, the MTD 50 boasts a tight turning radius, enhancing its ability to navigate around obstacles such as trees and flower beds. This design ensures that users can achieve a pristine finish without the need for extensive trimming afterward.

Comfort is paramount with the MTD 50. The tractor is equipped with an ergonomic seat designed for extended hours of use, complete with armrests to reduce fatigue. The user-friendly dashboard displays important information such as fuel levels and engine performance, allowing users to monitor their tractor's status effortlessly.

Additionally, the MTD 50 incorporates advanced technologies like the hydrostatic transmission, providing seamless speed adjustments without the need for gear shifting. This feature enhances the driving experience, allowing for better control and responsiveness while mowing.

Durability is another key characteristic of the MTD 50. Constructed with high-quality materials and featuring a sturdy frame, it is built to withstand the rigors of outdoor use. Regular maintenance is simplified with easy access points to critical components, ensuring longevity and reliability over the years.

In summary, the MTD 50 is a powerful and efficient garden tractor that stands out due to its robust engine, advanced cutting deck, comfortable design, and user-friendly features. These elements make it a perfect choice for homeowners looking to maintain their lawns with ease and efficiency.