Important Safe Operation Practices | MTD 260 Thru 279 specs

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury. When you see this symbol - heed its warning.

WARNING: Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.

DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

General Operation

1.Read this operator’s manual carefully in its entirety before attempting to assemble this machine. Read, understand, and follow all instructions on the machine and in the manual(s) before operation. Be completely familiar with the controls and the proper use of this machine before operating it. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

2.This machine is a precision piece of power equipment, not a plaything. Therefore, exercise extreme caution at all times. Your unit has been designed to perform one job: to mow grass. Do not use it for any other purpose.

3.Never allow children under 14 years old to operate this machine. Children 14 years old and over should read and understand the operation instructions and safety rules in this manual and should be trained and supervised by a parent. Only responsible individuals who are familiar with these rules of safe operation should be allowed to use this machine.

4.Thoroughly inspect the area where the equipment is to be used. Remove all stones, sticks, wire, bones, toys and other foreign objects which could be tripped over or picked up and thrown by the blade. Thrown objects can cause serious personal injury. Plan your mowing pattern to avoid discharge of material toward roads, sidewalks, bystanders and the like. Also, avoid discharging material against a wall or obstruction which may cause discharged material to ricochet back toward the operator.

5.To help avoid blade contact or a thrown object injury, stay in the operator zone behind the handles and keep children, bystanders, helpers and pets at least 75 feet from the mower while it is in operation. Stop machine if anyone enters the area.

6.Always wear safety glasses or safety goggles during operation and while performing an adjustment or repair to protect your eyes. Thrown objects which ricochet can cause serious injury to the eyes.

7.Wear sturdy, rough-soled work shoes and close-fitting slacks and shirts. Shirts and pants that cover the arms and legs and steel-toed shoes are recommended. Never operate this machine in bare feet, sandals, slippery or light weight (e.g. canvas) shoes.

8.Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade can amputate hands and feet.

9.A missing or damaged discharge cover can cause blade contact or thrown object injuries.

10.Many injuries occur as a result of the mower being pulled over the foot during a fall caused by slipping or tripping. Do not hold on to the mower if you are falling; release the handle immediately.

11.Never pull the mower back toward you while you are walking. If you must back the mower away from a wall or obstruction first look down and behind to avoid tripping and then follow these steps:

a.Step back from the mower to fully extend your arms.

b.Be sure you are well balanced with sure footing.

c.Pull the mower back slowly, no more than half way toward you.

d.Repeat these steps as needed.

12.Do not operate the mower while under the influence of alcohol or drugs.

13.Do not engage the self-propelled mechanism on units so equipped while starting engine.

14.The blade control handle is a safety device. Never attempt to bypass its operation. Doing so makes the safety device inoperative and may result in personal injury through contact with the rotating blade. The blade control handle must operate easily in both directions and automatically return to the disengaged position when released.

15.Never operate the mower in wet grass. Always be sure of your footing. A slip and fall can cause serious personal injury. If you feel you are losing your footing, release the blade control handle immediately and the blade will stop rotating within three seconds.

16.Mow only in daylight or in good artificial light. Walk, never run.

17.Stop the blade when crossing gravel drives, walks or roads.

18.If the equipment should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble.

19.Shut the engine off and wait until the blade comes to a

260 Thru 279 specifications

The MTD 260 to 279 series represents a range of robust and versatile outdoor power equipment designed to cater to various lawn care and maintenance tasks. These models are tailored for both residential and commercial users, offering reliable performance through advanced engineering and cutting-edge technologies.

One of the standout features of the MTD 260 to 279 series is the powerful engine configuration. These machines are equipped with either gas or electric engines, ensuring efficient operation tailored to user preferences and environmental considerations. The gas models typically feature reliable four-stroke engines, known for their durability and ability to handle larger areas without frequent refueling. In contrast, the electric variants provide a quieter, emissions-free alternative, perfect for residential neighborhoods.

In terms of cutting technology, this series employs a range of deck sizes and cutting systems, providing users with options suited to their specific lawn dimensions and grass types. The precision-cut decks ensure even grass height, promoting healthier lawn growth. Furthermore, many models within this series come with adjustable cutting heights, allowing users to customize their mowing experience based on seasonal changes and grass growth rates.

Another significant aspect of the MTD 260 to 279 series is the emphasis on user convenience and comfort. Ergonomically designed handles and controls enhance ease of use, reducing fatigue during longer operation periods. Many models also come with features like self-propulsion, allowing users to navigate diverse terrains effortlessly.

Durability is a hallmark of the MTD brand, and these models reflect that commitment with robust construction using high-quality materials. Reinforced decks and weather-resistant components ensure longevity and withstand varying outdoor conditions, making them an excellent investment for users.

Further enhancing the appeal of the MTD 260 to 279 series is the integration of modern technologies. Some models incorporate smart features like LED headlights for improved visibility during low-light conditions and advanced safety systems that minimize the risk of accidents.

In summary, the MTD 260 to 279 series presents a comprehensive solution for lawn care enthusiasts. With powerful engines, versatile cutting options, user-centric design, and modern technologies, these models are engineered to deliver exceptional performance, making yard work more efficient and enjoyable. Whether for residential use or professional landscaping, the MTD 260 to 279 range stands out as a reliable choice for managing lawn care needs.