Setup Adjustment, Step | MTD 588 instruction

Setup and

Adjustment

NOTE: Stand behind the mower as if you were going to operate it. Your right hand cor- responds to the right side of the mower; your left hand corresponds to the left side of the mower.

NOTE: Your mower is shipped with the handle in the higher height position.

�

Step 1

��

�

Step 2

1.Remove any packing material which may be between upper and lower handles.

a.Pull up and back on upper handle as shown in Step 1. Make certain the lower handle is seated securely into the handle mounting brackets.

b.Tighten hand knobs securing upper handle to lower handle. Make sure that each carriage bolt is seated properly in the handle.

2.Locate hairpin clip in one hole on the weld pin on each side of lower handle.

a.Remove hairpin clip from this hole. Using a pair of pliers, insert hairpin clip into the other hole on the weld pin. Repeat on other side.

b.Insert a carriage bolt from the hardware pack into the upper hole on the handle mounting bracket. Secure with one plastic wing nut, also included in the hardware pack. Repeat on other side with remaining items from hardware pack.

3.The rope guide is attached to the right side of the upper handle. Loosen the wing nut which secures the rope guide.

a.Hold blade control handle against upper handle.

b.Pull starter rope out of the engine. Release blade control handle.

c.Slip starter rope into rope guide.

d.Tighten wing nut.

4.Insert post on cable ties into holes provided on the lower handle. Pull cable tie tight and trim excess.

5.Install rear wheels as follows in Step 5: (maybe already installed)

a.Place rear of the mower deck on raised blocks.

b.Remove lock nut from pivot arm assembly (on select models, these may be included separately in a plastic bag).

c.Slide wheel, with hollow side in, onto pivot arm and secure with lock nut.

d.Assemble the other side in the same manner.

NOTE: Each end of the lower handle must be placed in the same relative position.

IMPORTANT This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying engine manual BEFORE operating your mower.

�

� �

Step 3

Step 4

588 specifications

The MTD 588 is a state-of-the-art machine designed for those who prioritize efficiency and precision in their operations. As a versatile piece of equipment, the MTD 588 excels in multiple applications, making it suitable for both industrial and agricultural settings.

One of the primary features of the MTD 588 is its robust engine. Powered by an advanced high-torque engine, it ensures optimal performance under challenging conditions. The engine not only boosts efficiency but also guarantees lower fuel consumption, which translates to reduced operating costs.

Another distinguishing characteristic of the MTD 588 is its superior engineering design. The chassis is constructed from high-strength materials, providing durability and resilience against wear and tear. This rugged build allows the machine to endure harsh environments, whether it’s navigating rocky terrain or operating in wet conditions.

The MTD 588 incorporates cutting-edge technology to enhance user experience. It features an intuitive touchscreen interface that simplifies operation and monitoring. Users can easily access vital information such as engine performance, maintenance schedules, and operational parameters. This technology not only makes the machine user-friendly but also helps in reducing downtime by facilitating timely maintenance.

In terms of versatility, the MTD 588 is equipped with an array of attachments. From tillers to plows, this machine can adapt to various tasks, making it an all-in-one solution for different industries. The quick attachment system further ensures that transitioning between tasks is smooth and efficient, maximizing productivity.

Safety is also a key feature of the MTD 588. It includes advanced safety mechanisms such as emergency shut-off controls and enclosed engine compartments to protect operators from potential hazards. The ergonomic design of the operator's seat, complete with adjustable settings, ensures comfort during long hours of operation.

The MTD 588 is not only built for performance and safety but also emphasizes environmental responsibility. Equipped with a low-emission engine, it meets strict environmental standards, making it a sustainable choice for eco-conscious consumers.

In summary, the MTD 588 combines powerful performance, advanced technology, and robust design to deliver exceptional results across various applications. Its unique features, versatility, and commitment to safety and environmental standards make it a standout choice for professionals seeking reliability and efficiency in their operations.