MTD 050 thru 062 manual Contents of Hardware Pack

SECTION 2: CONTENTS OF HARDWARE PACK

Remove this sheet from your operator’s manual and lay the hardware on the illustration for identification purposes. After Assembly, keep the Slope Gauge which is on the reverse side of this sheet for future use.

(Hardware pack may contain extra items which are not used on your unit. Part numbers are shown in parentheses.)

A		ATTACHING THE		B	ATTACHING THE	Split Washers
		LOWER HANDLE			UPPER HANDLE	5/16” I.D.
						(736-0119)
		Hex
		Bolts
		3/8-24 x
		1 1/2”
		Long
		(710-0459)
					Curved	Hex Nuts
					Head
					Bolts	5/16-18 Thread
		Spacers 3/8” I.D. x			(710-1250)	(712-0267)
		7/8” O.D.
				C	ATTACHING THE
		(750-0910)
		Cupped Washers			STARTER ROPE
		3/8” I.D. x 7/8” O.D.
		(736-0105)
					Rope
					Guide
					(710-1205)
		Hex Lock Nuts			Hex Lock Nut
					1/4-20 Thread
		3/8-24 Thread
						(712-0324)
		(712-0355)
D	SECURING THE CABLE		Cable Ties -- Qty. 3
			(726-0240)

E	INSTALLATION OF WHEELS	Cupped Washers
		3/8” I.D. x
	Axle Bolts	1-1/8” O.D.
		(736-0331)
	Qty. 4
(738-0533)

Cupped

Washers 3/8” I.D. x

7/8” O.D. (736-0105)

Hex Nuts

3/8-16 Thread

(712-0798)

6