Removing Chute Retainer (Models 080 Series)
The chute deflector on your mower is held in an upright position by a retainer for shipping purposes only. Remove the retainer by following the steps below, before running the mower for the first time.
•Push the chute deflector up and towards the engine. Holding the deflector in this position, remove the retainer. See Figure 5.
•Lower the chute deflector carefully to its operating position keeping your fingers out of the way.
Raise Chute |
Deflector |
Remove |
Retainer |
Figure 5
WARNING: The chute retainer must be removed and discarded before operating the mower.
Installing Mulching Baffle (Model 080 Series)
If your mower is equipped with the optional mulching baffle, install it following these instructions:
•Lift up side discharge chute and insert the mulching baffle so that the notches at the bottom of the baffle sit firmly on the lip of the deck opening.
See Figure 6.
•Snap the hooks of the baffle over the hinge pin on the discharge chute. Make sure that the hooks snaps into place, locking the mulching baffle firmly onto the mower.
•Release the side discharge chute.
Installing Side Discharge Chute (Model 090 Series)
If your mower is equipped with the optional side discharge chute, install it following these instructions:
•Slide the hooks of the side discharge chute over the hinge pin on the mulching baffle. Make sure that the hooks snaps into place, locking the chute firmly onto the mower. See Figure 7.
•Release the mulching baffle.
Discharge
Chute
Baffle | Hinge |
Hook | |
Insert Notches | Pin |
on Top of Lip |
|
Figure 6
Mulching
Baffle
Side Discharge | Hooks |
Chute |
|
Figure 7
SECTION 4: KNOW YOUR LAWN MOWER
Read this operator’s manual and safety rules before operating your lawn mower. Compare the illustration in Figure 8 with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.
WARNING: The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.
Blade Control Handle
The blade control handle is located on the upper handle of the mower. The blade control handle must be depressed in order to operate the unit. Release blade control handle to stop engine and blade. See Figure 8.
WARNING: This blade control mechanism is a safety device. Never attempt to bypass its operations.
8