NAMES AND FUNCTIONS OF PARTS
!3Infrared Receptor Window
This is the receptor of control signals sent from the RC4001PM remote controller. Point the remote controller towards this window to properly transmit signals.
!4PHONES jack
This jack is for connecting headphones with a standard stereo plug. To listen with headphones, turn the speaker output OFF by setting the SPEAKERS 1 and 2 buttons o in the OFF position.
ENGLISH
REAR PANEL
A | B C D |
| E |
| F | ||
PHONO |
| PRE OUT | MAIN IN | R | SPEAKERS | L |
|
|
|
|
| SYSTEM 1 |
| ||
L | GND | L | L |
|
| MODEL NO. PM7001 |
|
|
|
|
|
|
|
| |
R |
| R | R |
|
|
| AC IN |
|
|
|
|
|
|
| |
|
|
|
|
| SYSTEM 2 |
|
|
|
|
|
|
|
|
| REMOTE |
|
|
|
|
|
| SERIAL NO. | CONTROL |
|
|
|
|
|
|
| |
CD | TUNER AUX | RECORDER 1 | RECORDER 2 |
|
|
|
|
| / DVD | IN OUT | IN OUT |
|
|
| IN |
|
|
|
|
|
|
| |
L |
|
| L | SYSTEM 1 OR SYSTEM 2 4 |
| ||
|
|
|
| SYSTEM 1 AND SYSTEM 2 8 | OUT | ||
|
|
|
|
|
|
| |
|
|
| SEPARATE |
|
|
| |
R |
|
| R |
|
|
|
|
|
|
| ON | OFF |
|
|
|
MLKJ | I | H |
A PHONO Input jacks
These jacks are for connecting to an analog record player. MM cartridges can be used.
B PHONO GND terminal
Connect the grounding wire from an analog record player.
C PRE OUT jacks
These jacks are for connecting to the input jacks of an- other
D MAIN IN jacks
These jacks are for connecting to the output terminals of another
E SPEAKERS SYSTEM 1, 2 output terminals
You can connect 2 speaker systems, SPEAKERS 1 and SPEAKERS 2 E. Speaker output can be turned ON/OFF from the SPEAKERS 1 and 2 buttons o on the front panel.
F AC IN socket
Connect the supplied AC power cable to this socket and a power outlet.
G REMOTE CONTROL jacks
These jacks are for connecting to other Marantz components such as a CD player or DVD player that has a remote control connector (D.BUS jack).
You can use the remote controller supplied with the PM7001 to control the system.
For more details, see page 13.
G
H SEPARATE switch
This switch is used for selecting the
OFF: Select this position when the amplifier is used as a normal integrated amplifier. (Standard factory set- ting)
ON: The
I RECORDER 1/RECORDER 2 output jacks
These jacks are for connecting to the recording input jacks of a
J RECORDER 1/RECORDER 2 input jacks
These jacks are for connecting to the output jacks of a CD- R player, MD deck, tape deck, etc.
K AUX/DVD input jacks
These jacks are for connecting to the output jacks of a DVD player or other LINE component.
LTUNER input jacks
These jacks are for connecting to the output jacks of a tuner or other LINE component.
M CD input jacks
These jacks are for connecting to the output jacks of a CD player or similar component.
7