Engine Oil Check, Fuel Check | Multiquip GA-6HA instruction

GA-6HA AC Generator

Starting Instructions

The following instructions are intended to assist the user in starting the GA-6HA AC Generator.Please read the entire instructions before starting.

Engine Oil Check

1.To check the engine oil level, place the generator on secure level ground with the engine stopped.

2.Remove the filler cap/dipstick from the engine oil filler hole and wipe it clean.

3.Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick.

4.If the oil level is low (Figure 1), fill to the edge of the oil filler hole with the recommended oil type (Table 1). Maximum oil capacity is 1.16 quarts (1.1 liters).

Figure 1. Engine Oil Dipstick (Oil Level)

Table 1. Motor Oil Grade

Season or Temperature			Grade of motor oil
Season or Temperature			(higher than MS class)
			(higher than MS class)

Spring, Summer or Autumn			SAE 30
+120° F to +15° F			SAE 30
+120° F to +15° F

	Winter		SAE 30
	+40° F to +15° F		SAE 30
	+40° F to +15° F

	Below +15° F		SAE 10W-30


	WARNING	Explosive Fuel Hazards

Gasoline is extremely flammable, and its vapors can cause an explosion if ignited. DO NOT start the engine near spilled fuel or combustible fluids.

DO NOT fill the fuel tank while the engine is running or hot. DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system. Store fuel in approved containers, in well-ventilated areas and away from sparks and flames.

Fuel Check

1.Close the fuel cock before filling the fuel tank.

2.Remove the fuel cap located on top of fuel tank.

3.Readthefuelgaugelocatedontopofthefueltank(Figure 2) to determine if the fuel level is low. If fuel is low, replenish with clean unleaded fuel.

Figure 2. Fuel Gauge

4.When refueling, be sure to use a strainer for filtration. DO NOT top-off fuel. DO NOT fill the tank beyond capacity. Wipe up any spilled fuel immediately!

Before Starting the Engine

1.Be sure to disconnect all electrical loads from the generator prior to starting the engine.

2.NEVER start the engine with the main circuit breaker in the ON position. Always place the main circuit breaker (Figure 3) in the OFF position before starting.

Figure 3. Main Circuit Breaker (OFF)

Starting the Engine

1.Place the engine fuel valve lever (Figure 4) to the ON position.

Figure 4. Engine Fuel Valve Lever

GA-6HA specifications

The Multiquip GA-6HA is a versatile and robust generator designed to meet the power needs of a variety of applications, particularly in construction, events, and emergency backup situations. With its compact design and impressive performance capabilities, the GA-6HA is an ideal choice for professionals and contractors who require reliable electrical supply in remote locations or during power outages.

One of the standout features of the GA-6HA is its powerful 6,000-watt output, which provides sufficient power to run multiple tools and equipment simultaneously. This generator is equipped with a Honda GX390 engine, known for its durability and fuel efficiency. The engine operates quietly, making it suitable for use in noise-sensitive environments. Furthermore, the advanced design of the engine ensures minimal emissions, aligning with environmental regulations and promoting cleaner operation.

In terms of technology, the GA-6HA is fitted with a heavy-duty alternator that delivers stable power with a rated output of 120/240 volts. This feature allows users to connect various electrical devices without worry of voltage fluctuations that could damage sensitive equipment. The generator also incorporates a manual reset circuit breaker for added safety, preventing overload conditions.

Durability is a significant characteristic of the GA-6HA, as it is built with a rugged steel frame that can withstand the rigors of outdoor use. The generator's design includes an integrated lift hook for easy transport and positioning on job sites. Additionally, the anti-vibration mounts help to minimize noise and maintain stability during operation.

The GA-6HA features multiple outlets, including 120V 20A duplex receptacles and a 120/240V 30A locking receptacle, providing flexibility for connecting various tools and appliances. An easy-to-read fuel gauge and easy-access control panel contribute to user-friendliness and operational efficiency.

Overall, the Multiquip GA-6HA is designed to be a reliable power solution, effectively combining performance, durability, and portability. Whether for construction sites, outdoor recreational activities, or emergency power needs, this generator stands out for its impressive features and user-centric design.