Marantz MM9360 manual Specifications, Imd

Page 9

anced connections, and try moving the amplifier, wiring, lighting, or other equipment to different locations to isolate the source of the noise.

9. SPECIFICATIONS

*Power Output

(Maximum Average Power, 0.1% THD, 1KHz)

Rated Per Channel, Two Channels Driven

 

MM9360

MM9340

4 ohm:

250W RMS

400W RMS

8 ohm:

150W RMS

275W RMS

Mono Bridged

 

 

(1 Channel)

 

 

8 ohm:

500W RMS

800W RMS

Rated Per Channel, All Channels Driven

 

MM9360

MM9340

4 ohm:

250W RMS†

400W RMS†

8 ohm:

150W RMS

275W RMS

Mono Bridged

 

 

8 ohm:

500W RMS

800Watts RMS

Input Impedance: 20K ohm balanced, 10K ohm unbalanced, 3.65K ohm RCA

**THD ( Full Power 1KHz @ 8 ohms): < 0.06%

**THD (20Hz-20KHz @ 8 ohms): < 0.2%

**IMD

(SMPTE 60Hz/7KHz 4:1)

@8 ohms: <0.2% (throughout power range) (IHF) @ 8 ohms: <0.1% (throughout power range)

**Hum and Noise: -100dB from full output (A-weighted)

Full Power Input Sensitivity:

MM9360

MM9340

1.08V RMS (2.9dBu)

1.47V RMS (5.6dBu)

Frequency Response:

8ohm: ±0.5dB 20Hz-20kHz

4ohm: ±1.5dB 20Hz-20kHz Voltage Gain: 32X (30.1dB)

Crosstalk: < -80dB (20Hz - 1KHz)

Signal Present Signal Sensitivity: 13mV RMS (-35.5dBu)

Power Requirement:

110-125VAC 50/60Hz

Typical Idle Current

 

 

MM9360

 

MM9340

120V: 0.81A

120V: 0.9A

Current with Typical Audio Program Material (4 ohm load - all Channels)

MM9360

MM9340

120V: 6.5A

120V: 7.0A

Connections

Input: XLR - 1/4” (Pin 2: Hot, Tip: Hot), RCA

Output: 5-Way Binding Post

Cooling: Forced Air, Thermal Sensitive Variable Speed Fan, Front Inlet/Rear Outlet

Dimensions: 17 5/16” W x 5 3/4” H x 13 1/8” D

Construction: 14 Gauge All-Steel Chassis, Aluminum Front Panel

Weight:

MM9360

MM9340

Shipping

51lbs.

50lbs.

Net

45lbs.

44lbs.

Specification conditions: 120VAC 60Hz, 25°C

* Continuous power limited by power line capacity

**Non-conventional amplifiers require bandwidth limiting for all distortion and noise measurements.

Signal peaks in audio programming may trigger protection circuitry at low line voltages. Specifications are subject to change or improvement without notice.

9

Image 9
Contents Model MM9340 Model MM9360 Power Amplifier Page Safety Instructions Features IntroductionNames and Functions Power indicator Protect indicatorPower switch STEREO/BRIDGE Mono switchBalanced Inputs Input XLR and ¼ Phone jacksUnbalanced Inputs RC-5 IN/OUT jackSpeaker Connections Care and MaintenanceRepairs TroubleshootingNo Audio Output Distorted SoundIMD SpecificationsPage Page MM9X1-09/03

MM9360 specifications

The Marantz MM9360 is a high-performance power amplifier designed to deliver exceptional audio fidelity to music enthusiasts and home theater aficionados alike. Built on the foundation of Marantz's legacy in high-end audio, the MM9360 brings together innovative technologies and meticulous craftsmanship, making it an ideal choice for those seeking to enhance their audio experience.

One of the standout features of the MM9360 is its powerful output, capable of delivering 180 watts per channel into 8 ohms and 250 watts per channel into 4 ohms. This ensures that the amplifier can easily drive a wide range of speakers, from sensitive bookshelf models to larger floor-standing designs. The amplifier’s robustness allows it to handle dynamic musical passages without distortion, allowing listeners to enjoy their favorite tracks with clarity and impact.

The design of the MM9360 reflects Marantz's commitment to high-quality construction. It utilizes a fully discrete current feedback amplifier configuration, which minimizes feedback and distortion while enhancing transient response. This results in a natural sound characteristic that faithfully reproduces the original recording, making it a favorite among purists.

In terms of connectivity, the MM9360 is equipped with balanced XLR inputs as well as RCA inputs, offering flexibility for integration into various audio setups. The rear panel features sturdy binding posts to accommodate speaker connections securely. Additionally, the amplifier utilizes a sophisticated power supply, designed to handle peak demands efficiently and provide clean power to all connected components.

Another significant characteristic of the MM9360 is its low noise operation, achieved through careful component selection and layout. This attention to detail ensures that even the faintest nuances in a performance are not lost in unnecessary background noise, allowing listeners to fully immerse themselves in the audio experience.

The Marantz MM9360 also comes with a robust protection circuit that safeguards the unit and connected speakers from issues like overheating or short circuits. This feature adds an extra layer of reliability and peace of mind for users, allowing them to enjoy their music without worry.

In summary, the Marantz MM9360 is a powerful, versatile, and beautifully crafted amplifier that exemplifies the brand’s dedication to high-fidelity audio. Its combination of cutting-edge technologies, robust design, and sound engineering makes it an outstanding choice for any audio system, bringing the listener closer to the true essence of music. Whether used in a stereo setup or as part of a home theater, the MM9360 promises to elevate the listening experience to new heights.