Miller Electric GP30 owner manual

Page 2

DANGER

TO PREVENT POSSIBLE ROLLOVER, OBSERVE THE FOLLOWING

SAFETY PRECAUTIONS

Carry loads as low as possible

Drive tractor slowly when turning, operating on hills or inclines, or traversing un- even ground

Raise load to full height only when tractor in on even ground and front wheels are straight ahead

TO PREVENT POSSIBLE PERSONAL INJURY, OBSERVE THE FOLLOW-

ING SAFETY PRECAUTIONS

Never walk or work under a raised loader that is not firmly supported

Always relieve the hydraulic system to zero pressure before performing repairs on any component of the loader’s hydraulic system

Image 2
Contents GP30 Loader Page Table of Contents Composite Bearing Information Mounting Loader Dismounting Loader QUICK-ATTACH Instructions GP30 Loader General Part List CYLINDER, BUCKET, GL/GP30Schematic MAINFRAME, GL30/GP30 Bearing & Seal DetailSliding Latch Detail Quick Attach FrameGL30/GP30 GL/GP30 Loader AUX. Line KIT TIP, Female 3/8 NPT PioneerGL30/GP30 Loader Stand LEG Part ListBucket CYLINDER, GL/GP30 BucketGP30 Lift CYLINDER, GP30, LHCY-060-R Lift CYLINDER, GP30, RHPiston Gland CP-KT-UGP30 Specifications Lifting CapacityWarranty Dec