Knoll UDS-Quad, US-Quad, UR-Quad, UDR-Quad, US4-Hub warranty Dlp-Tv

Page 2

Wiring: A send module (UDS-Quad or US-Quad) needs to be connected to a Knoll receive module (UDR-Quad or UR- Quad) to work correctly. The send and receive module

are connected using a single cat 5 wire using all 8 conductors. Connection is made with the RJ45 connector (RJ45 plug not supplied). Always use standard cat 5 wiring practices. Using the correct wire pairs and polarity is VERY important.

Connection to stereo video source equipment: Connect the four UDS-Quad or US-Quad gold RCA jacks with a good quality gold connector four wire component RCA jumper cable to the appropriate three component output and digital audio output jacks on your DVD, dish receiver, D-VHS, VCR, stereo or other equipment.

If there is a switched outlet on your output equipment, you may want to plug the PS1202 power supply to the switched outlet.

Make sure a good quality RJ45 8-8 crimper is used to connect the RJ45 connector to the cat 5 wire. Poor crimping and mismatched wires are the most frequent cause of installation problems.

Power requirements: The Knoll quad balun system requires two PS1202 power supplies connected one each to the send and receive units.

Note: The quad Decora style and enclosure style models can be mixed or matched as desired.

Connection to the Projector, TV or other components: Connect the four UDR-Quad or UR-Quad gold RCA jacks with a good quality gold connector four wire component RCA jumper cable to the appropriate three component input and digital audio jacks on your projector, plasma, TV or other component. Make sure the correct projector, plasma, TV or other component input is selected.

Multiple Connection(s): If the component and digital signal needs to be sent to more than one receiver, this can easily be accomplished by using the Knoll US4-HUB for up to six outputs. For more the US4-Hub can be daisy chained together.

The Knoll send receive system does not have any user adjustments and is completely automatic. If need be, please call our tech line for details at 1 800 566 5579.

This product may contain lead that some states have determined are harmful. Wash you hands after touching this product.

Decora™ is a trademark of Leviton

DVD Player

PS1202

CAT 5

Send

Receive

DLP-TV

PS1202

Image 2
Contents Installation Instructions Component Balun SpecificationsWarranty FeaturesDLP-TV