Important Safety Instructions

VEC130B_Manual EN_030906 5/25/06 1:52 PM Page ii

WARNINGS

1.TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, do not expose this unit to rain or moisture. NEVER submerge it in water or liquids of any kind.

2.NEVER insert objects of any kind into the unit’s ventilation slots, as this can short circuit parts, resulting in fire or electrical shock.

3.NEVER attempt to recharge disposable dry cell “C” type batteries. This could be dangerous.

4.DO NOT dispose of batteries in fire, as this may result in an explosion.

5.Operation of a TV in a moving vehicle is not permitted if the driver can view the screen while driving. Not paying attention to the road may result in a serious accident.

CAUTIONS

•BEFORE FIRST USE, THE UNIT’S RECHARGEABLE BACKUP BATTERIES SHOULD BE CHARGED FOR A FULL 12 HOURS USING THE 120 VOLT AC CHARGING METHOD.

•Use only the supplied adapters for recharging this unit.

•Do not crush, cut, pull or expose adapter cords to extreme heat.

•Position adapter cords so they do not become entangled or become a safety hazard. Keep adapter cords away from sharp edges.

•Make sure all switches are in the OFF position before connection to a power source.

•When using the 120 Volt AC Adapter or 12 Volt DC Adapter, do not use the unit near water, such as a bathtub, sink or laundry, in a wet basement or next to a swimming pool. It is NOT waterproof.

•Never insert anything other than the supplied 120 Volt AC Adapter and 12 Volt DC Adapter into the 12 Volt DC Charging/Power Outlet on this unit. Do not use any accessory not recommended or provided by the manufacturer.

•Unplug adapters and disconnect any AV equipment during violent storms, or when left unattended or unused for long periods of time.

•All slots and openings in this unit are required for ventilation and temperature control. They should not be blocked or covered in any way during operation.

•Follow all warnings, cautions and instructions marked on this unit and indicated in this User’s Manual.

•To prevent possible electrical damage to unit or your vehicle, always unplug the 12 Volt DC Adapter cord from your vehicle’s accessory power outlet BEFORE removing the plug from the unit.

•Check unit periodically and discontinue use if parts or accessories are found to be damaged or defective. To replace worn or defective parts, contact Vector’s Customer Service department toll-free at (866) 584-5504.

•Do not open this unit except to replace the “C” type dry cell batteries. There are no other user- serviceable parts. The rechargeable backup batteries are not user-replaceable.

•This is not a toy! Keep unit out of reach of children (whether stored or in use).

•Supplied cell phone charging tips may not work with all cell phones.

Using the wrong tip may damage your device. Manufacturer is not responsible for damage caused in this manner.

Verify tip compatibility with your cell phone manufacturer or consult your cell phone user manual before using this unit's cell phone charging feature.

Read This User’s Manual Before Using This Unit.

SAVE THESE INSTRUCTIONS

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Modifications not authorized by the manufacturer void user’s authority to operate this device.

VEC130B specifications

The Vector VEC130B is a compact and versatile electric vehicle designed to meet the growing demands of urban transport and logistics. Its innovative design integrates efficiency and technology to provide a reliable solution for various applications, from last-mile delivery to municipal services.

One of the main features of the VEC130B is its electric powertrain, which delivers impressive performance while minimizing environmental impact. The vehicle is powered by a robust electric motor that offers significant torque, enabling quick acceleration and an efficient driving experience. The energy storage is managed by advanced lithium-ion batteries, providing an optimal range for daily operations without the need for frequent recharging. The battery management system is designed to enhance longevity and ensure safety during operation.

The chassis of the VEC130B is built using lightweight materials, which contribute to improved energy efficiency and maneuverability. This makes the vehicle ideal for navigating tight urban spaces, allowing for easy handling in crowded environments. The compact dimensions do not compromise on cargo space, as the VEC130B offers a generous load capacity.

In terms of technology, the VEC130B is equipped with a state-of-the-art infotainment system that features real-time navigation, connectivity options, and telematics. The telematics system allows fleet managers to monitor vehicle performance, track location, and analyze usage patterns, leading to better operational efficiency. Furthermore, the vehicle’s regenerative braking system helps to recover energy during deceleration, further extending its range and enhancing overall efficiency.

Safety is a key consideration in the design of the VEC130B. The vehicle includes multiple safety features, such as advanced braking systems, stability control, and a reinforced body structure to protect passengers and cargo alike. Additionally, the inclusion of LED lighting enhances visibility while driving at night or in low-light conditions.

Overall, the Vector VEC130B stands out as an eco-friendly and efficient option in the realm of electric vehicles. With its combination of advanced technology, practical design, and strong performance, it is well-suited for meeting the diverse needs of urban transportation and delivery services, paving the way for a sustainable future in mobility.