Operation, Preparation, Starting Engine

14.Stop the engine and disconnect the spark plug wire:

a)before checking, cleaning or working on unit

b)after striking a foreign object (inspect the unit for damage and make repairs before restarting and operating)

15.Stop the engine:

a)whenever you leave the unit

b)before refueling

c)before clearing blockages.

16.Reduce the throttle setting during engine run-out and, if the engine is provided with shut-off valve, turn the fuel off at the conclusion of operating.

17.Before shutting off, put drive lever in neutral.

OPERATION

PREPARATION

1.Carefully read this manual and operate TRS-20/TSS-20 correctly.

2.Always check machine on level ground.

3.Visually check all moving parts and all fasteners, if loose or broken, tighten or replace. Check for broken or bent blades, replace if necessary.

4.Lubricate all fittings after every four hours of using machine, using a pressurized gun with standard lithium base lubricant (see “General Maintenance” section). Wipe off fittings before and after lubricating.

5.Add oil to the engine crankcase with engine resting in a level position (refer to engine manufacturer’s Owner’s Manual for the correct type and amount of oil).

6.Fill the fuel tank according to engine manufacturer specifications.

7.Police lawn area for obstacles and debris (i.e. sprinklers, hoses, toys, etc.)

8.Mark underground sprinkler heads and other hidden obstacles to prevent damage.

STARTING ENGINE

CAUTION

TO AVOID INJURY, DO NOT PLACE YOUR FEET OR OTHER BODY PARTS UNDER THE BLADES WHILE STARTING THE ENGINE.

2.Turn choke on (closed).

3.Turn ignition switch to “on”.

4.Move throttle control to high RPM setting. Do not exceed 3600 rpm.

5.Pull recoil starter rope until engine starts.

6.After engine is warm, turn off choke (open).

7.Allow engine to run one minute before operating.

8.Check engine rpm setting before operating, DO NOT exceed 3600 rpm.

TRANSPORTING THE TRS-20/ TSS-20

Fig. 1

Fig. 2

1.Position height adjustment lever to the start/transport position (see Fig. 1).

2.Start Engine, drive up ramps, make sure the blades do not hit the ramps or vehicle.

3.Slow the throttle to desired speed for loading.

4.To clear sidewalks, driveways, etc., press down on handle, raising front of the TRS-20/TSS-20.

OPERATING THE TRS-20/TSS-20

1.Put speed lever in neutral position.

2.Start engine.

3.Engage bail.

4.Move speed lever forward, to move forward.

5.Move speed lever backwards, to reverse.

6.Drive TRS-20/TSS-20 to area to be raked or seeder.

7.Move height adjustment lever to the appropriate setting for the shaft assembly being used. (see “Optional Shaft Assemblies” section)

8.	Lift bail to engage the main shaft. Release
1. Turn fuel cock to the “open” position	bail to stop.	5
		5

TSS-20, TRS-20 specifications

The Little Wonder TRS-20 and TSS-20 are outstanding examples of compact and efficient machines in the realm of lawn and garden care. These robust tools are designed with versatility and ease of use in mind, making them ideal for both residential and commercial applications.

One of the standout features of the TRS-20 is its powerful engine, which provides ample torque and speed to handle a variety of tasks. With a 20-inch cutting width, the TRS-20 can traverse large areas quickly, reducing the time spent on lawn maintenance. The TSS-20, on the other hand, excels in its ability to tackle the toughest terrains, thanks to its specialized tines that dig into even the hardest ground.

Both machines are equipped with advanced technologies like electric start and adjustable cutting height, allowing users to customize their experience according to specific requirements. The TRS-20 features a self-propelled design, making it easier for users to navigate uphill and through uneven landscapes. It also has a dual-blade system that ensures clean and precise cuts, promoting healthy grass growth.

In terms of comfort, both models have ergonomically designed handles that reduce user fatigue during prolonged use. The adjustable handlebars can be modified to accommodate users of various heights, ensuring that everyone can operate the machines comfortably. Additionally, the lightweight design of the TRS-20 and TSS-20 allows for easy maneuverability, making them user-friendly for both novice and experienced users.

The Little Wonder TRS-20 and TSS-20 also incorporate durable materials in their construction, ensuring longevity and reliable performance over the years. Their rugged build means they can withstand the rigors of professional landscaping while maintaining efficiency and effectiveness.

Moreover, the machines are environmentally friendly, with options for electric power that help to reduce carbon emissions. This attention to sustainability makes them an attractive choice for eco-conscious consumers looking to maintain their lawns while also being mindful of the environment.

In conclusion, the Little Wonder TRS-20 and TSS-20 offer a powerful combination of efficiency, power, and ease of use. With their advanced technology, robust features, and environmentally friendly design, these machines set the standard for modern lawn care equipment, making them indispensable tools for both homeowners and landscaping professionals alike.