Little Wonder 2/1/1990, 4/1/1970, 3/1/1970, 3/1/2000, 2/1/1970 Storage / Torque Specifications

Page 14

STORAGE / TORQUE SPECIFICATIONS

LITTLE

WONDER BLOWER

STORAGE

To prevent possible explosion or ignition of vaporized

To put the equipment into service after an extended

fuel, do not store equipment with fuel in tank or

period of storage.

carburetor in an enclosure with open flame (for example,

1.

Check for loose parts and tighten if necessary.

a furnace or water heater pilot).

Before the equipment is put into storage for any

2.

Fill the fuel tank and then check the engine oil

period exceeding 30 days.

 

level.

1.

Drain all fuel from the fuel tank and fuel lines.

3.

Start the engine and check for fuel leaks. Repair

2.

Start the engine and run until all the fuel is used

 

any leaks before operating the unit.

 

 

 

from the carburetor float bowl and the engine

 

 

 

stops.

 

 

3.

While the engine is still warm, drain the crankcase

 

 

 

oil and replace with the proper weight oil

 

 

 

corresponding to the season the equipment will be

 

 

 

next used.

 

 

4.

Remove the spark plug and squirt a small amount

 

 

 

of engine oil into the cylinder. Slowly pull the

 

 

 

starter a few times to distribute oil in the cylinder

 

 

 

and reinstall the spark plug.

 

 

5.

Top off if necessary. See engine manual for

 

 

 

details.

 

 

TORQUE SPECIFICATIONS

Location

Description

P/N

Min. Torque

Max. Torque

Ft-lbs (In-lbs)

Ft-lbs (In-lbs)

 

 

 

 

 

 

 

 

Housing to engine face

BLT-W LF 5/16-24 x 1-3/8

910517

22

28

 

 

 

 

 

Engine to deck

BLT 5/16-18 X 1-1/2

64262-009

19

25

 

 

 

 

 

Fan to Crankshaft

BLT-HEX 7/16-20 x 1-3/4 GR8

64123-253

50

90

(USED ON 9270 MODELS)

 

 

 

 

 

 

 

 

 

 

BLT-HEX 3/8-24X1-3/4 GR8

 

30

50

 

(USED ON 9390 AND 9400

64123-127

 

MODELS)

 

 

 

 

BLT-HEX 3/8-24 X 2.5 GR 8

64123-267

30

50

 

(USED ON 9570 MODELS)

 

 

 

 

 

 

 

 

 

14

Image 14
Contents Operators California Wash Hands After HandlingImportant Message Many UsesSafety Become AlertMultiple Operators Machine PreparationSite Preparation and Circumstances Starting Operating SafelyGeneral Operating on SlopesMaintenance Safety Storage SafetySafety Decals Before StartingSET-UP Instructions SET-UP InstructionsSET-UP Instructions Controls Before Starting the Engine Operation / MaintenanceMaintenance Instructions Operating InstructionsHorizontal Deflector AdjustmentsDeflector Lever Deflector ChainStorage Storage / Torque SpecificationsTorque Specifications Intake Guard Assy Description QTYEngine Assy Item Part no Description QTYHousing Assembly Little Wonder

2/1/1990, 2/1/1970, 3/1/2000, 3/1/1970, 4/1/1970 specifications

Little Wonder is a name deeply embedded in the evolution of garden and lawn care equipment. Established in the early 20th century, this brand has made significant contributions to gardening technology across various decades, particularly highlighted by models and innovations that emerged around the years 1970 and 2000.

In 1970, the Little Wonder company showcased a range of robust outdoor power equipment. One of the standout products from this era included the Little Wonder 4/1/1970. This model was renowned for its exceptional versatility and ease of use. It was designed primarily for landscaping professionals and serious gardeners who required efficiency and reliability. The 4/1 model featured a lightweight construction, making it accessible for users of various physical capabilities. Its powerful 4-stroke engine provided both strength and efficiency, allowing gardeners to tackle a variety of tasks such as mowing, debris removal, and edging seamlessly.

Transitioning to later models, the innovations continued with the introduction of the Little Wonder 3/1/1970 and 3/1/2000. These align with the trend of integrating more advanced technologies into garden equipment. The 3/1 models paralleled the shifting focus toward user-friendly designs with enhanced performance. These models incorporated ergonomic features such as cushioned grips and adjustable handles, addressing the growing demand for comfort during prolonged use.

By the late 1990s, specifically with the 2/1/1990 model, Little Wonder had embraced the burgeoning technology of the time, featuring more eco-friendly engine options which were quieter and produced fewer emissions compared to their predecessors. This gave users the dual benefit of exceptional performance combined with environmental consciousness.

Entering the new millennium, the Little Wonder 2/1/2000 reflected a peak in technology with the adoption of digital controls for easier operation and monitoring. These advancements not only improved the performance of older models but also set the stage for the future of garden care, insisting on efficiency, sustainability, and user accessibility.

Overall, Little Wonder has continually evolved, adapting to the needs of users while embracing new engineering and environmental developments. This journey through the decades showcases the brand's commitment to quality and innovation that has resonated with both amateur gardeners and landscaping professionals alike.