TECHNICAL
SPECIFICATIONS
Machine
Product | Ordering |
| Rated DC Output | AC | Dimensions & Weight |
Name | Information | Description | Amps / Volts / Duty Cycle | Power (1) | H x W x L |
Weldanpower | 125 Amp DC | DC Constant Current | 4,500 Watts, 60 Hz (2) | 21 x 20 x 30 in | |
125 |
| Arc Welder | 125A / 25V / 30% | 40 Amps @ 115V (3) | (530 x 508 x 702 mm) |
| with | 100A / 25V / 60% | 20 Amps @ 230V |
| |
| CSA | 4,500 Watts |
| ||
|
|
|
| ||
|
| (3,500 Watts CSA) |
| CSA | 190 lbs |
|
| AC Power |
| 3,500 Watts, 60 Hz (2) | (86 kgs) |
|
|
|
| 30 Amps @ 115V (4) |
|
|
|
|
| 15 Amps @ 230V |
|
|
|
|
|
|
|
(1)When welding, available auxiliary power will be reduced.
(2)115V will operate either 60 Hz, or 50/60 Hz power tools, lights, etc.
(3)Each branch circuit can supply up to 20 amps at the same time. (Circuits cannot be wired in parallel to operate the same device.)
(4)Each branch circuit can supply up to 15 amps at the same time. (Circuits cannot be wired in parallel to operate the same device.)
Engine
Engine |
| Horsepower & |
|
|
| Operating | & | Fuel | |
Model | Description | Displacement | Ignition | Capacities |
| Speeds | Consumption | ||
|
| ||||||||
|
|
|
|
|
|
|
|
| |
Briggs & Stratton | 1 Cylinder, | 9 HP | Manual, | Fuel: |
|
|
|
| |
| Full Load: 3,500 RPM | .8 Gals/Hr | |||||||
Vanguard | 4 Cycle, | @ 3,600 RPM | Recoil Start; | 1.8 gals |
|
|
|
|
|
| Overhead Valve, |
|
| (7.0 ltrs) |
| High Idle: 3,750 RPM | .3 Gals/Hr |
| |
| 18.1 cu in | Manual |
|
|
|
|
|
| |
| Gasoline Engine, | (297 cc) | Choke | Oil: |
| Low Idle: 2,400 RPM | .2 Gals/Hr |
| |
| Aluminum Alloy, |
|
| 1.25 qts |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Cast Iron Liners |
|
| (1.2 ltrs) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Electrode Selection Guide
|
| Material Thickness |
|
|
|
|
|
|
|
|
|
| 1/8” and Thinner |
|
| 1/8” and Thicker | |||
|
|
|
|
|
|
|
|
|
|
| Electrode | AWS* | Electrode Polarity |
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Type | Class | 3/32” |
|
| 1/8” |
| 5/32” | |
|
|
|
|
|
|
|
|
|
|
| FLEETWELD® 5P | 6010 | + | 50 - 70 A |
|
| 75 - 125 A |
| |
| FLEETWELD® 35 | 6011 | + | 50 - 75 A |
|
| 70 - 110 A |
| 80 - 125 A |
| FLEETWELD® 180 | 6011 | + | 50 - 80 A |
|
| 55 - 110 A |
| 105 - 125 A |
| FLEETWELD® 37 | 6013 | + / - | 70 - 95 A |
|
| 100 - 125 A |
| |
| JETWELD® | 7018 | + | 70 - 100 A |
|
| 90 - 125 A |
| |
| JETWELD® | 7018 | + | 65 - 85 A |
|
| 90 - 125 A |
| |
| STAINWELD® | + | 50 - 60 A |
|
| 55 - 95 A |
| 80 - 125 A | |
| SOFTWELD® 99Ni | + | 50 - 80 A |
|
| 80 - 110 A |
| 100 - 125 A | |
| WEARSHIELD® ABR | + |
|
| 50 - 125 A |
| |||
|
|
|
|
|
|
|
|
|
|
The values listed above are suggested settings. Actual setting may vary depending on individual preference and/or specific application. Follow tables found in accompanying Lincoln literature for those electrodes not listed. Ask for Lincoln “WELDIRECTORY” Publication C2.10 for a complete listing of all Lincoln stick electrodes. *AWS (American Welding Society)