Land Pride RBT1560, RBT1572 & RBT1584 manual RBT15 Rear Blades, Point Hook-Up

Page 9

Land Pride

Table of Contents

Section 1: Assembly & Set-up

RBT15 Rear Blades

Refer to Figure 1-1:

1.Insert the blade assembly (#1) through the hole on the main frame assembly (#2).

2.Place the pivot cap (#3) over the threaded shaft protruding through the opening on the main frame assembly (#2).

3.Thread on slotted hex nut (#4) until the vertical play is removed from pivot.

4.Insert the cotter pin (#5).

5.Line up holes in the mainframe assembly and blade assembly and insert lock pin (#6).

6.Position upper hitch mast (#7) on the main frame (#2) and insert bolts (#8). Retain with lock washers (#9) and hex nuts (#10). Tighten to proper torque.

!CAUTION

Always check to be sure that the slotted hex nut and cotter pin are in place to retain the blade before reversing the blade. If they are missing, the blade will fall off the frame while being rotated!

12015

RBT15 3-Way Rear Blade Assembly

Figure 1-1

7.Install support leg (#11) into support stand bracket and secure with 3/8" x 1 3/4" lg. roll pin (#12).

8.Secure the wire pin (#13) in the top hole when storing the blade. Raise the leg all the way up and secure the wire pin in the bottom hole when the blade is attached to a tractor.

3-Point Hook-Up

Refer to Figure 1-2

!DANGER

Tractor hook-up can be hazardous to your health or that of your helper. Do not allow anyone to stand between the rear blade and the tractor during hook-up operations. Do not operate the hydraulic 3-point lift controls while someone is directly behind the tractor.

1.Slowly back the tractor up to the rear blade and use the tractor’s 3-point hydraulic control to adjust the lower link arms up or down to match the height of the rear blade hitch pins.

!DANGER

Engage parking brake, shut off tractor and remove key before dismounting from the tractor.

2.Slide the lower link arms hitch link holes onto the rear blade hitch pins.

3.Install a linch pin or other fastener (supplied by customer) through the hitch pin hole to lock the lower links into position.

4.Connect the top link to the upper pivot hitch using a clevis pin supplied by the customer.

13809

Tractor 3-Point Hitch

Figure 1-2

2/01/07

RBT1560, RBT1572 & RBT1584 Rear Blades 301-144M

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Rear Blades Table of Contents Be Aware Signal Words For Your ProtectionShutdown and Storage Use a Safety Chain Use Safety Lights and DevicesPractice Safe Maintenance Transport Machinery SafelyWear Protective Equipment Prepare for EmergenciesAvoid High Pressure Fluids Hazard Keep Riders Off Machinery818-202C Safety LabelsUsing This Manual ApplicationOwner Assistance Further Assistance Land Pride Service Department East North StreetPoint Hook-Up RBT15 Rear BladesBlade Tilt Angling and reversingPitch Blade OffsetOperating Check List Operating ChecklistTransporting General Operating InstructionsLubrication Points MaintenanceSeasonally Moldboard and BladeSide Plates Skid ShoesRake Attachment Storage StandRBT15 Series Specifications & CapacitiesRBT15 Series Rear Blades Features and BenefitsInches Metric Torque Values ChartWarranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 1 pages 5.84 Kb

RBT1572 & RBT1584, RBT1560, Rear Blades specifications

Land Pride has established itself as a leader in providing high-quality landscape maintenance equipment, with the RBT1584, RBT1572, and RBT1560 being excellent additions to their line of rotary tillers. These robust machines are designed to enhance productivity while ensuring reliability and performance across various agricultural and landscaping tasks.

The RBT1584 model, with an impressive working width of 84 inches, is tailored for larger tractors, making it an ideal choice for heavy-duty tilling operations. It features a durable construction with a reinforced frame, providing exceptional stability and strength, which allows it to tackle tough soil conditions with ease. The advanced rotary tiller blades are carefully designed to cultivate the soil deeply while minimizing clumping, ensuring a fine soil texture that promotes healthy plant growth.

The RBT1572 is slightly smaller, with a working width of 72 inches, making it suitable for mid-sized tractors. This model strikes an excellent balance between size and power, providing operators with the versatility needed to cultivate garden plots or larger fields. Its unique blade arrangement ensures optimal soil aeration and mixing, enhancing nutrient distribution and encouraging vigorous plant growth.

For those who need a more compact option, the RBT1560, with a 60-inch working width, is the perfect fit. This model is particularly well-suited for smaller tractors and tight working spaces. Despite its size, the RBT1560 does not compromise on efficiency or effectiveness, providing exceptional soil preparation for both gardens and landscaping projects.

All three models come equipped with several advanced technologies, including a slip clutch system that protects the tiller from damage caused by unexpected obstacles. The gear-driven design ensures exceptional power transfer from the tractor to the tiller, promoting efficient operation. Additionally, the tillers feature adjustable skid shoes, allowing operators to set the desired depth for tilling, which is crucial for various farming requirements.

In summary, Land Pride's RBT1584, RBT1572, and RBT1560 rotary tillers are designed to meet the diverse needs of farmers and landscape professionals. With their robust construction, efficient operation, and user-friendly features, these tillers are essential tools for anyone looking to cultivate and maintain healthy and productive soil. Whether you’re planning a small garden or working on larger agricultural projects, Land Pride’s rotary tillers deliver reliability and performance that can be counted on for years to come.
Top Page Image Contents