Land Pride CA2560 manual Important Safety Information, Be Aware Signal Words, For Your Protection

Page 3

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Make sure all guards and shields

are in place and secured before

operating implement.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not allow anyone to stand

between tractor and implement

while backing up to implement.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

! DANGER

Indicates an imminently hazardous

situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

working area.

▲ Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

▲ Do not carry passengers on

implement at any time.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

Parts Manual QR Locator

The QR (Quick Reference) code on the front cover and to the left will take you to the Parts Manual for this equipment. Download the appropriate App on your smart phone, open the App, point your phone on the QR code and take a picture.

Dealer QR Locator

The QR code on the left will link you to available dealers for Land Pride products.

Refer to Parts Manual

QR Locator on this page for detailed instructions.

12/06/11

CA2560 & CA2572 Core Aerators 325-020M

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Core Aerators Table of Contents Shutdown and Storage Important Safety InformationBe Aware Signal Words For Your ProtectionUse a Safety Chain Practice Safe MaintenanceTransport Machinery Safely Wear Protective Equipment Keep Riders Off MachineryAvoid High Pressure Fluids Hazard 818-719C Safety LabelsIntroduction Using This ManualApplication Owner AssistanceFurther Assistance Land Pride Service Department East North StreetUnloading Instructions Assembly Instructions Hitch AssemblyGeneral Description Tools RequiredWater Tanks Option Optional Weight TanksParking Stands AdjustmentsStorage Position Without Added Weight Storage Position With Added WeightEquipment Safety Pre-Start ChecklistOperating Checklist Operator SafetyCompact Tractors Tractor Hook-UpQuick Hitch Hook-Up Standard TractorsLeveling Adjustments Transporting Un-hooking Core AeratorStorage General Operation Instructions CA2560 Shown with optional water tanks Weight TanksLand Pride Weight Tanks OptionsHours MaintenanceMaintenance and Lubrication LubricationSpecifications & Capacities CA25 SeriesDescription CA2560 CA2572 Features Benefits Features & BenefitsProblem Solution TroubleshootingTorque Values Chart For Common Bolt Size Torque Values ChartIn-tpi Ft-lb Mm x pitch 20 CA2560 & CA2572 Core Aerators 325-020M Warranty WarrantyModel Number Serial Number Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 16 pages 8.82 Kb

CA2560, CA2572 specifications

Land Pride is a trusted name in the agricultural equipment industry, and its CA2572 and CA2560 models are exemplary examples of their commitment to quality and performance. These implements are essential for maintaining landscapes, enhancing efficiency in field operations, and providing reliable service for various farming activities.

The Land Pride CA2572 is a robust and versatile 72-inch wide mower designed for tackling a variety of grass and vegetation types. Its heavy-duty construction includes a 10-gauge steel deck that ensures durability and resistance to wear from tough operating conditions. Equipped with a powerful spindle, this mower excels in providing a clean, precise cut, making it ideal for commercial landscapers and farmers alike. Additionally, the CA2572 features adjustable cutting heights ranging from 1.5 inches to 4 inches, allowing users to customize their mowing to suit various terrains and vegetation types.

On the other hand, the Land Pride CA2560 model offers similar reliability with a 60-inch cutting width, making it suitable for smaller properties or for use in tighter spaces. This model also embodies the same high-quality construction with a robust 10-gauge steel deck but is designed to be more maneuverable than its larger counterpart. The CA2560, like the CA2572, offers adjustable cutting heights that provide versatility for users. Both models incorporate a floating deck design that enables the mower to follow the contours of the ground, ensuring an even cut regardless of the terrain.

One of the standout technologies featured in these models is Land Pride's patented Quick-Hitch compatibility. This innovative system allows for fast and efficient attachment and detachment, saving valuable time during field operations. Both models are designed to work seamlessly with a wide range of tractors, making them a convenient addition to any farming or landscaping fleet.

Furthermore, both mowers are equipped with safety features such as belt-driven blades and reinforced blade spindles, which provide peace of mind to operators. Their high-performance capabilities, combined with low maintenance requirements, make the CA2572 and CA2560 the ideal choice for those seeking reliable and efficient mowing solutions.

In conclusion, the Land Pride CA2572 and CA2560 models are engineered for durability, performance, and ease of use. With their robust construction, adjustable cutting heights, and innovative features, these mowers represent a smart investment for anyone looking to enhance their land management practices. Whether you're a commercial landscaper or a dedicated farmer, these models will surely meet your needs and exceed your expectations.
Top Page Image Contents