Land Pride FM3072, FM4088 Leveling the Mower, Cutting Height Adjustment, Point Hitch Adjustments

Page 13

Land Pride

Section 3: Adjustments

Table of Contents

Leveling the Mower

NOTE: Tractor and mower should be on level ground.

Leveling can be adjusted at the tractor’s 3-point arms and center link.

Cutting Height Adjustment

Refer to Figure 3-1:

The machines cutting height depends upon the position of the rear roller.

1.Remove the bolts that fix the roller on both sides.

2.Lift or lower both sides of roller in equal measurements.

3.Replace bolts and re-tighten.

18008

Cutting Height

Figure 3-1

3-Point Hitch Adjustments

The 3-point hitch system on this mower has been designed for front to back flotation when mowing on uneven terrain. Adjust tractor’s top center link to place the upper hitch pin vertically above or slightly behind the lower hitch pins. The mower should be run with the back 15 degrees lower than the front.

The hitch can also be adjusted from side to side by turning the adjustment handle. Turn handle until you have achieved your desired location. Refer to Figure 3-2.

18008

Hitch Adjustment

Figure 3-2

!CAUTION

Engage parking brake, shut off tractor, remove key and disengage PTO before making any height adjustments!

Belt Tension

!CAUTION

Belt drive system under spring tension; use care to avoid bodily harm!

The Belt tension should be checked after the first 20 hours of use. And then every 40 hours of use.

1.To check tension apply approximately 22 pounds of pressure half way between the pulleys. There should be approximately 3/8” of deflection. Tension on the belt can be adjusted with the belt tension bolt. Turn the bolt until desired tension is achieved. When the belt has the correct tension the gearbox should be adjusted so that the gearbox extension is running straight (parallel) with the flail mower. Loosen bolts at the bottom of the gearbox and move gearbox until gearbox extension is running straight. Refer to Figure 3-3.

18008

Belt Tension

Figure 3-3

2.If there is excessive deflection the belts should be replaced. Refer to “Belt Installation” Figure 5-1.

3.Excessive tension on the belt may lead to premature failure of belt and drive components.

!WARNING

Excessive tension on the belt may lead to premature failure of belt and drive components. Excessive tension on the belt may also lead to a safety hazard to the operator or bystanders.

7/06/06

Series No FM3072, FM3088 & FM4088 Flail Mowers 309-106M

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Flail Mowers Table of Contents Safety at All Times Practice Safe Maintenance Use Safety Lights and DevicesTransport Machinery Safely Wear Protective Equipment Prepare for EmergenciesKeep Riders Off Machinery 818-130C 818-230C Safety Labels818-552C 818-558C 818-543C818-556C 838-079C Owner Assistance Using This ManualTractor Requirements Hitch AssemblyTractor Hook-Up Driveline InstallationMowing Instructions TransportingRake Teeth Operating InstructionsPoint Hitch Adjustments Cutting Height AdjustmentLeveling the Mower Belt TensionService Mowing Knives FM3072 & FM3088 & Hammers FM4088 MaintenanceKnife or Hammer Replacement Belt InstallationHours LubricationDriveline Shaft U-Joints Roller Bearing Both EndsGearbox RequiredDriveline Profiles Do not overfillFM3072 FM3088 FM4088 FM30 & FM40 Series Flail MowersFeatures Benefits Features and BenefitsBelt slipping Problem SolutionPatches of uncut grass Excessive vibrationIn-tpi Torque Values Chart· m · m Ft-lb Mm x pitchOverall Unit and Driveline One year Parts and Labor WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

FM3072, FM4088 specifications

The Land Pride FM4088 and FM3072 are premium rotary mowers designed to deliver exceptional performance in tough mowing conditions. These agricultural implements are engineered for efficiency and versatility, making them ideal for both commercial and residential applications.

One of the standout features of the FM4088 and FM3072 is their robust construction. Both models boast a heavy-duty frame that provides stability and durability, ensuring they can withstand the rigors of frequent use. The FM4088, with an 88-inch cutting width, and the FM3072, measuring 72 inches, are particularly well-suited for large properties, landscaping companies, and municipalities.

Both mowers are equipped with a high-performance rotary cutting system that includes sharp, heat-treated blades designed to provide a clean cut while minimizing clumping. The innovative design of the cutting deck enhances airflow, which improves cutting efficiency and discharge of grass clippings. This results in a well-manicured appearance, promoting healthier lawn growth.

The FM4088 and FM3072 feature adjustable cutting heights, allowing operators to choose the perfect grass length for their specific needs. The height adjustment system is simple to use, providing convenience for users who require different mowing heights throughout the season.

These mowers are powered by reliable hydraulic systems that enable smooth operation and precise control. The hydraulic drive ensures that power is efficiently transmitted to the blades, resulting in effective cutting performance even in dense grass and thick underbrush.

User comfort is a priority with both models. They come with user-friendly controls that make operation intuitive, while the ergonomic design reduces operator fatigue, allowing for longer periods of use without discomfort.

Additionally, the FM4088 and FM3072 are compatible with a variety of tractors, thanks to their standard three-point hitch design. This flexibility ensures that they can be used with a wide range of machinery, making them a valuable addition to any fleet.

Overall, the Land Pride FM4088 and FM3072 rotary mowers combine strength, efficiency, and user-friendly features, making them the go-to choice for professionals and lawn care enthusiasts seeking dependable mowing solutions. With their exceptional capabilities and durability, these mowers represent a wise investment for anyone looking to maintain expansive green spaces with ease.
Top Page Image Contents