Land Pride DM3707 Series manual Rope Hook-up, Transport Latch Operation, Upper Spring Connection

Page 17

Table of Contents

Section 2: Operating

IMPORTANT: Two small chains are supplied with the driveline. These chains must be attached to outer and inner driveline yoke shields and to the cutter deck and tractor to restrict driveline shields from rotating.

9.Hook one of the driveline safety chains in a hole on the outer driveline yoke shield and the opposite end to the tractor to restrict outer shield rotation.

10.Hook second driveline safety chain in a hole on the inner driveline yoke shield and the opposite end to the Disc Mower to restrict inner shield rotation.

11.Start tractor and raise Disc Mower just enough to remove blocks used to support Disc Mower frame in step 4a on page 14.

12.Slowly engage tractor’s hydraulic 3-point to lower Disc Mower. Check for sufficient drawbar clearance. Move drawbar ahead, aside or remove if required.

Rope Hook-up

Refer to Figure 2-4:

Two ropes are provided so that the operator does not need to get off the tractor to unlock cutter bar in the up position after transporting. Thread both ropes through the guide loop (#1) located on top of the main frame and tie free ends to tractor within reach of operator.

21020

Figure 2-4

Transport Latch Operation

Refer to Figure 2-5:

Change mower from field position to transport position by pulling on field run latch rope and retracting hydraulic cylinder until transport latch (#2) engages.

Change mower from transport position to field position by retracting hydraulic cylinder, pulling on transport latch rope (#2), and then extending hydraulic cylinder until cutter bar reaches field running position.

21033

Figure 2-5

Upper Spring Connection

Refer to Figure 1-2 on page 9:

!DANGER

Do not connect or disconnect mower to tractor with upper spring (#9) connected to pin (B). The upper spring pulls on 3-point main frame and will quickly turn main frame upon removing one of the tractor’s 3-point arms.

The upper spring (#9) should be connected to pin (B) after mower has been hooked-up to a tractor and disconnected from pin (B) before unhooking mower from a tractor.

After Hooking-up Mower to Tractor

Attach upper spring (#9) by retracting hydraulic cylinder until spring’s slotted bar is inserted over pin (B). Secure upper spring to pin (B) with flat washer (#12) and linch pin (#13).

Before Unhooking Mower From Tractor

Disconnect upper spring (#9) by retracting hydraulic cylinder until upper spring slotted bar can be removed from pin (B). Remove flat washer (#12), linch pin (#13), and slotted bar from pin (B). Return washer and linch pin to pin (B) for storage.

9/15/06

DM3705, DM3706, and DM3707 Series Disc Mowers 327-083M 15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Disc Mowers Table of Contents Shutdown and Storage Be Aware Signal WordsFor Your Protection Practice Safe Maintenance Use Safety Lights and DevicesTransport Machinery Safely Tractors With Cabs orPrepare for Emergencies Tire SafetyWear Protective Equipment Keep Riders Off MachineryImportant Safety Information Safety Labels818-641C 818-558C Application Using This ManualOwner Assistance IntroductionAssembly and Set-Up Assembly PreparationTools Required Gearbox and Cutter Bar LubricationSupport Stand Assembly Main Frame to Cutter Bar AssemblyPTO Guard Assembly Cutter Bar Assembly Refer to -4 and Figure Main Frame Assembly Back SideCanvas Curtain Assembly Operating Point Pin Set-upTractor Hook-up Checking Driveline Minimum Length Driveline InstallationTransport Latch Operation Rope Hook-upUpper Spring Connection After Hooking-up Mower to TractorAdjusting Lower Spring Tension Spring Tension AdjustmentAdjusting Upper Spring Tension TransportingOperating Check List Operating ChecklistWorking Position Mowing InstructionsOperating Instructions Safety Break-AwayTable of Contents Cutting Height Belt Tension AdjustmentAdjustments Servicing Blades General MaintenanceMaintenance and Lubrication Belleville Washer Replacement Cutter Bar Timing AdjustmentLubricate as noted in Maintenance and Lubrication on Blade & Belleville Washer Pt. No’sRequired LubricationHours Hitch Pivot Point Cutter BarFrame Pivot Point DM3705 DM3706 DM3707 Specifications & CapacitiesSeries Disc Mowers DM37 Series Disc Mowers Features & BenefitsFeatures Benefits Troubleshooting Appendix Torque Values Chart for Common Bolt SizesWarranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

DM3707 Series, DM3706 Series, DM3705 Series specifications

Land Pride, a leading manufacturer of agricultural and land management equipment, offers the DM3705, DM3706, and DM3707 series of rotary mowers. These models are designed to efficiently handle a variety of mowing tasks, making them ideal for maintenance of pastures, brush, and lawns. With a commitment to quality and performance, each series provides unique features and technologies that cater to different user needs.

The DM3705 series is characterized by its compact design and ease of use, making it suitable for smaller tractors. It features a 5-foot cutting width, which provides excellent maneuverability in tight spaces. The mower is equipped with a durable, heavy-duty steel frame and three-blade system, ensuring a clean cut and long-lasting performance. The quick hitch feature allows for easy attachment and detachment, enhancing user convenience.

The DM3706 series takes performance a step further with a wider 6-foot cutting width. This model is ideal for users looking to cover more ground with each pass. It incorporates Land Pride's patented cutting blade technology, which optimizes cutting efficiency and reduces fuel consumption. The side discharge feature ensures that clippings are evenly distributed, promoting healthy turf. Additionally, adjustable cutting height options allow operators to customize the mower's performance according to the mowing conditions.

For larger operations, the DM3707 series offers an impressive 7-foot cutting width while maintaining the performance standards of its predecessors. This series is designed to handle more demanding mowing tasks, with an emphasis on durability and reliability. The heavy-duty construction is reinforced to withstand harsh conditions and rough terrain, making it suitable for commercial applications. Its advanced blade design and high-capacity gearboxes contribute to smoother operation and reduced maintenance.

Each of these DM3700 series mowers features Land Pride's innovative safety mechanisms, including shielded blades and secure mounting systems. The ergonomic controls enhance user comfort during operation, reducing fatigue over long working hours. These mowers are compatible with a variety of tractors, making them versatile options for farmers, landscapers, and property managers alike.

In summary, the Land Pride DM3705, DM3706, and DM3707 series rotary mowers are designed to meet diverse mowing needs while offering reliable performance and advanced features. Their robust construction, efficiency, and user-friendly design make them preferable choices for anyone looking to maintain large areas with ease and effectiveness.
Top Page Image Contents