Table of Contents
Section 3: Adjustments
Land Pride
3-Point Hitch Adjustments
The
3.Excessive tension on the belt may lead to premature failure of belt and drive components. Excessive tension on the belt may also lead to a safety hazard to the operator or bystanders. Not enough tension on the belt may lead to premature failure of the belt due to excessive slipping.
!CAUTION
Engage parking brake, shut off tractor, remove key and disengage PTO before making any height adjustments!
Belt Tension
Refer to Figure 3-3:
!CAUTION
Belt drive system under spring tension; use care to avoid bodily harm!
1.To check tension, apply force at arrow A. With a tension tester and deflect belt 1/4". The force required to get this deflection should range from 7 to 10 lbs.
2.To adjust belt tension, adjust eyebolt (#1), as necessary. This adjustment will increase or decrease tension on spring (#2).
!WARNING
Excessive tension on the belt may shorten the useful life of belt and drive components. Excessive tension on the belt may also lead to a safety hazard to the operator or bystanders.
16642
Belt Tension
Figure
16 FDR3590 Rear Discharge Grooming Mowers | 12/10/07 |