Land Pride fd1548 manual Tractor Hookup, Driveline Installation

Page 11

Land Pride

Table of Contents

Section 1 Assembly and Setup

Tractor Hookup

1.Be certain that the tractor draw bar will not interfere. Move the draw bar ahead or remove if required. Draw bar should also be checked for clearance when the unit is being raised for the first time.

2.Align the lower link arms of the tractor to the hitch clevises on the mower. Insert the lower hitch pins into the lower ball swivels and attach the lynch pins.

3.Attach the tractor top link to the upper floating hitch on mower with the pin supplied. Secure with the lock pin.

4.Adjust the tractor top link in or out to place the upper hitch pin vertically above the lower hitch pins in to allow mower flotation.

Driveline Installation

1.Slide the driveline end with the extended safety cone over the splined shaft of the gearbox and secure with attaching device.

2.Slide the driveline over the tractor’s splined PTO shaft and secure with locking device of driveline.

3.The driveline should now be moved back and forth to insure that it is secure on the PTO shaft of the tractor and mower gearbox.

4.Attach the chain from the PTO shield to one of the upper hitch braces to ensure that the shield does not rotate.

5.Should the driveline require shortening:

a.Hold the half-shafts next to each other in the shortest working position and mark them.

b.Shorten inner and outer guard tubes equally.

c.Shorten inner and outer sliding profiles by the same length as the guard tubes.

d.Proper overlap is a minimum of one-half the length of each tube, with both tubes being of equal length.

e.Round off all sharp edges and remove burrs. Grease sliding profiles.

!CAUTION

Tractor PTO shield and all mower guards must be in place at all times during operation!

7/18/08

FD1548 & FD1560 3-Spindle Grooming Mower 310-155M

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Spindle Grooming Mower Operator’s ManualTable of Contents Shutdown and Storage Important Safety InformationKeep Riders Off Machinery For Your ProtectionTransport Machinery Safely Use Safety Lights and DevicesPractice Safe Maintenance Wear Protective Equipment Tire SafetySafety at All Times Prepare for Emergencies818-142C 818-230C 818-130C818-552C 818-555C 818-250C818-293C 818-540C818-556C 818-558C Product Support Using This ManualIntroduction Owner AssistanceTractor Requirements Upper Hitch Arms AssemblyTractor Hookup Driveline InstallationTransporting Prestart ChecklistBefore You Start Operating InstructionsLeveling the Mower Point Hitch AdjustmentsCutting Height Adjustment Belt Tension Problem Cause Solution TroubleshootingGeneral Description MaintenanceGeneral Maintenance PTO U-Joint Service Mowing BladesBlade Replacement StorageBearing in Blade Spindle Hubs Wheel BushingWheel Support Bushings Gearbox FD1548 FD1560 FD1548 & FD1560 3-Spindle Grooming MowerTire Size Torque Values Chart for Common Bolt SizesTire Inflation Chart AppendixWarranty Corporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA

fd1548 specifications

The Land Pride FD1548 is a robust and versatile finishing mower designed to deliver exceptional cutting performance for landscaping and turf management. Built with durability in mind, this mower is perfect for both commercial and residential applications, making it a popular choice among professional landscapers and homeowners alike.

One of the standout features of the FD1548 is its cutting width of 48 inches, which allows for efficient mowing in smaller or more compact areas while still achieving a professional finish. This mower is equipped with three high-quality, heat-treated blades that ensure clean and precise cuts. These blades can be easily replaced or sharpened, extending the mower's longevity and maintaining optimal performance.

The FD1548 utilizes a floating deck design that allows the mower to contour to the ground's surface, effectively handling uneven terrain. This feature significantly reduces the risk of scalping, ensuring an even cut across various grass types and height variations. The mower's adjustable cutting height ranges from one to four inches, offering the flexibility needed to achieve the desired finish for any lawn.

For enhanced durability, the FD1548 is constructed with a heavy-duty frame and reinforced deck. The use of high-quality materials in its design ensures that it can withstand the rigors of constant use while maintaining its integrity over time. Additionally, the mower's powder-coated finish protects against rust and corrosion, making it suitable for various environmental conditions.

The FD1548 is designed for compatibility with standard Category 1 three-point hitches, allowing it to be easily attached to a wide range of tractors, which further enhances its versatility. Its simple greasing points and maintenance-friendly design contribute to hassle-free upkeep, making it an ideal choice for those who prefer a low-maintenance mower.

Another key aspect of the Land Pride FD1548 is its user-friendly operation. The mower is designed with safety features such as blade safety guards and a simple control system that makes it easy for operators of all experience levels to use. This attention to safety, combined with its performance capabilities, makes the FD1548 a valuable tool in any landscaping arsenal.

In summary, the Land Pride FD1548 finishing mower offers a combination of cutting efficiency, durability, and ease of use. Its innovative design and thoughtful features make it an excellent investment for anyone looking to achieve professional-quality mowing results. Whether for commercial landscaping or residential lawn care, the FD1548 stands out as a reliable and effective solution.
Top Page Image Contents