Land Pride RCR1548, RCR1560 manual Be Aware Signal Words, For Your Protection, Shutdown and Storage

Page 3

Land Pride

Important Safety Information

Table of Contents

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

working area.

▲ Turning tractor too tight may

cause implement to ride up on

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

wheels. This could result in injury

or equipment damage.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

12/28/05

RCR1542, RCR1548, RCR1560 and RCR1572 Rotary Cutters 312-556M

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Rotary Cutters Table of Contents Be Aware Signal Words For Your ProtectionShutdown and Storage Transport Machinery Safely Use Safety Lights and DevicesUse a Safety Chain Practice Safe MaintenanceAvoid High Pressure Fluids Hazard Prepare for EmergenciesWear Protective Equipment Keep Riders Off Machinery818-540C Safety Labels818-142C 818-552C 818-556C 818-564C818-830C Safety Combo Using This Manual ApplicationOwner Assistance Dealer Assembly Dealer AssemblyTractor Requirements Point Hook-Up Table of ContentsPTO Hookup Maximum PTO driveline Movement During OperationDriveline Shortening Vent Plug Installation Vent Plug Oil PlugVent Plug Location Rear Rubber Guard RCR1560 & RCR1572 Safety GuardsRubber Guards RCR1542 & RCR1548 Front Rubber Guard RCR1560 & RCR1572Rear Chain Guard Front Chain Guard RCR1560 & RCR1572Rear Chain Guard RCR1560 & RCR1572 Front Chain GuardCutting Instructions Operating ChecklistTransporting Operating Check ListCutting Height Leveling ProcedureNominal Cutting Height Deck LevelingPoint Cutter Height Adjustment Cutter Height AdjustmentShear Bolt, Nut & Jam Nut Part Numbers MaintenanceService Cutting Blades Driveline ProtectionInspection Clutch DisassemblyClutch Assembly StorageGauge Wheel Hub Lubrication PointsHours Gauge Wheel Spindle TubeDriveline U-Joints Driveline Shield BearingsDriveline Profiles RCR1542 RCR1548 RCR1560 RCR1572 RCR15 Series Rotary CuttersRCR15 Series Single Deck Rotary Cutters Features BenefitsProblem Cause Solution Torque Values Chart In-tpiFt-lb · m Mm x pitch Warranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

RCR1548, RCR1542, RCR1572, RCR1560 specifications

Land Pride, a leading manufacturer of agricultural and landscaping equipment, offers a range of rotary cutters designed for efficient land management. Among their popular models are the RCR1560, RCR1572, RCR1542, and RCR1548. Each cutter is engineered to tackle various mowing tasks, making them ideal for homeowners, landscapers, and agricultural professionals.

The RCR1560 features a 60-inch cutting deck, which allows for swift and effective mowing of medium to heavy grass and brush. It is equipped with a heavy-duty frame that ensures durability, allowing users to tackle rugged terrains with ease. The RCR1560’s 3-blade design delivers a clean cut, while its adjustable cutting height lets operators customize their mowing experience.

Next in the lineup, the RCR1572, boasts a larger 72-inch cutting width, making it suitable for larger properties or extensive landscaping projects. Like its counterpart, the RCR1572 is built with a robust frame, and it incorporates a dual spindle design that enhances cutting performance. This model also features an optional side discharge that helps disperse clippings evenly, promoting a healthier lawn.

The RCR1542 and RCR1548 models cater to those needing smaller yet powerful rotary cutters. The RCR1542 has a 42-inch cutting width, while the RCR1548 extends to 48 inches. These compact models are perfect for maneuvering in tight spaces or smaller plots of land. Both offer an adjustable cutting height and a heavy-duty construction for longevity.

Each of these Land Pride rotary cutters comes equipped with safety features like chain guards and a flexible PTO shaft that minimizes the risk of damage. The blades are designed for easy maintenance and replacement, ensuring that users can keep their machinery running at peak performance.

Furthermore, Land Pride integrates advanced technologies into these rotary cutters, enhancing their operational efficiency. The gimbal-mounted design allows for better contour following, enabling the cutters to glide smoothly over uneven ground. This feature minimizes scalping and provides better cutting results.

Land Pride's commitment to quality is evident in these rotary cutters, making them a preferred choice for individuals seeking reliable, effective equipment for maintaining their landscapes. With a combination of robust design, versatile features, and advanced technology, the RCR1560, RCR1572, RCR1542, and RCR1548 stand out as excellent tools for managing grassy and brushy terrain efficiently.
Top Page Image Contents