Karcher KMR 1250 BAT manual Battery, Charging the battery

Page 9

English

Battery

Safety instructions to be noted when handling batteries are:

Note instructions for use and display them where they can be easily seen at the place where the battery is charged. Work with batteries only after having had instruction from skilled personnel.

Wear protective glasses and protective clothing when working with batteries. Note the accident-prevention regulations as well as DIN VDE 0510, VDE 0105 T.1.

No Smoking !

No naked flames, glowing embers or sparks in the vicinity of the battery as there is a risk of explosion and fire.

Splashes of acid in the eyes or on the skin should be rinsed out or washed away with copious amounts of clean water, thereafter consult a doctor without delay. Wash clothes contaminated with acid in water.

Risk of explosion and fire! Avoid short- circuits. Caution! Metal parts of the battery cells are always live so do not put any foreign object or tool down on the battery.

Electrolyte is highly corrosive. Under normal operating conditions there is absolutely no contact with the electrolyte. If the housing is destroyed the bound electrolyte released is equally as corrosive as the liquid form.

Return to manufacturer!

Used batteries bearing this symbol are reusable articles and must be fed back into the recycling process. Used batteries which are not fed back into the recycling process are to be disposed of as special rubbish in compliance with the regulations.

Checking the level of electrolyte in the battery

Note: Applies only to batteries that are not maintenance- free.

Check regularly the level of electrolyte in batteries filled with acid. Make sure the battery is fully charged before you carry out the check.

If required top up each cell with distilled water up to the mark or until the lead plates are covered by approx. 1 cm of liquid.

Charging the battery

Note: Use only the Kärcher recommended battery charger 6.654-107 for the battery 6.654-112 which is installed.

Bring the sweeper to a halt, remove the starting key

Pull out battery plug connection

Tip seat forwards and open cover

Connect battery cable to the charger

Connect charger to the mains power supply and switch it on. For the period for charging see the information supplied by the manufacturer of the battery charger.

It is essential to observe the instructions provided by the manufacturer of the battery charger!

19

Image 9
Contents KMR 1250 BAT English Important Information ContentsGeneral data Precautions to take when transporting the sweeperIntended usage Function of the main componentsOperating Controls PRIORTOINITIALSTART-UP PRIORTOEVERYSTART-UPStartingthesweeper Cleaning the filter Stopping the sweeper and switching offWorking with the sweeper BrakingTypical applications Picking up larger items sticks, tins, etcOvercoming obstacles Charging the battery BatteryMaintenance Replacing the main brush roller Adjusting the sweeping patternReplacing fuses Replacing the dust filtersReplace light unit TechnicalData Dimensions and weightsProblem Possible cause Remedy Sweeper does not move TroubleshootingKMR 1250 BAT Kehrsaugmaschine Aufsitzgerät 957-544