Jonsered CS 2135T manual Fueling, Fuel safety, Transport and storage, Long-term storage

Page 17

FUEL HANDLING

•In temperatures below 32°F (0°C) some oils become too viscous. This can overload the oil pump and result in damage to the oil pump components.

•Contact your service agent when choosing chain oil.

Fueling

WARNING! Taking the following precautions,

!will lessen the risk of fire:

Do not smoke and do not place any hot objects in the vicinity of fuel.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at least once a year. Contamination in the tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before refuelling. The capacities of the chain oil tank and fuel tank are carefully matched. You should therefore always fill the chain oil tank and fuel tank at the same time.

WARNING! Fuel and fuel vapor are highly

!flammable.Take care when handling fuel and chain oil. Be aware of the risks of fire, explosion and those associated with inhalation.

Fuel safety

•Never refuel the machine while the engine is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (gasoline and 2-stroke oil).

•Move the machine at least 10 ft (3 m) from the refuelling point before starting it.

•Never start the machine:

1If you have spilled fuel or chain oil on the machine. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

WARNING! Never use a machine with visible

!damage to the spark plug guard and ignition cable. A risk of sparking arises, which can cause a fire.

Transport and storage

•Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric motors, relays/switches, boilers and the like.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The bar guard must always be fitted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule.

English – 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Operator’s manual EPA Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Throttle lockout Stop switchChain catcher Vibration damping systemMuffler Cutting equipmentGeneral rules Cutting equipment designed to reduce kickbackGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingAdjustment of depth gauge setting General advice on adjusting depth gauge settingTensioning the chain Sharpening cutting teethChain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketFitting the bar and chain AssemblyFuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsDo not let go of the handles General Basic cutting techniqueTerms CuttingLimbing Felling technique for tree topsSafe distance Felling directionFelling cut FellingDirectional cuts Freeing a tree that has fallen badly How to avoid kickbackWhat is kickback? General MaintenanceCarburetor adjustment Checking brake band wear Correctly adjusted carburetorChecking the front hand guard Checking the brake triggerChanging a broken or worn starter cord MufflerStarter Tensioning the recoil spring Air filterChanging a broken recoil spring Fitting the starterWhen making adjustments Adjustment of the oil pumpSpark plug Lubricating the bar tip sprocketDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSafety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautions1150324-95 ´z+R@Q¶5x¨ ´z+R@Q¶5x¨

CS 2135T specifications

The Jonsered CS 2135T is a highly regarded chainsaw designed for professionals and serious enthusiasts alike. Renowned for its robust performance and ergonomic design, the CS 2135T stands out in the competitive field of power tools.

One of the main features of the Jonsered CS 2135T is its powerful engine. It is equipped with a 35cc two-stroke engine that delivers excellent power-to-weight ratio. This makes it particularly useful for tasks that require high performance, such as felling trees or cutting firewood. Additionally, the engine is designed with a reliable starting mechanism, ensuring that users can get to work quickly without frustration.

The CS 2135T also employs advanced technology to enhance its efficiency and ease of use. One notable technology is the Clean Power engine system, which reduces harmful emissions while improving fuel efficiency. This is particularly important for users who are conscious about environmental impact and want to minimize their carbon footprint while working.

Another key feature is the Air Injection centrifugal air cleaning system. This system reduces the amount of debris that enters the air filter, prolonging the lifespan of the filter and maintaining optimal engine performance. As a result, users can expect longer filter intervals, which translates to less maintenance work.

Ergonomics play a significant role in the design of the CS 2135T. The chainsaw is equipped with an anti-vibration system that minimizes vibrations felt by the user, making it more comfortable to operate over extended periods. The handles are designed for a secure grip, providing users with better control and reducing fatigue during use.

Safety is also a priority with the Jonsered CS 2135T. It features a chain brake that acts quickly to stop the chain in the event of kickback, protecting the operator from potential injuries. Additionally, the transparent fuel tank allows users to easily monitor fuel levels, preventing unexpected run-outs during work.

In summary, the Jonsered CS 2135T is a high-performance chainsaw that excels in power, efficiency, ergonomics, and safety. Its combination of advanced technologies, user-friendly features, and robust design makes it an excellent choice for anyone looking to tackle demanding cutting tasks with confidence. Whether you're a professional lumberjack or a homeowner looking for a reliable tool, the CS 2135T is built to deliver exceptional results.
Top Page Image Contents