Jonsered GR50 Federal Emission Control Warranty Statement, Your Warranty Rights and Obligations

Page 31

FEDERAL EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The EPA (The US Environmental Protection Agency), Environment Canada and Jonsered are pleased to explain the emissions control system warranty on your 2001 and later small nonroad engine. In U.S. and Canada, new small nonroad engines must be designed, built and equipped to meet the federal stringent anti-smog standards. Jonsered must warrant the emission control system on your small nonroad engine for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your unit.Your emmission control system includes Parts such as the carburetor and the ignition system. Where a warrantable condition exists, Jonsered will repair your small nonroad engine at no cost to you. Expenses covered under warranty include diagnosis, parts and labor.

MANUFACTURER′S WARRANTY

COVERAGE

The 2001 and later small nonroad engines are warranted for two years. If any emission related part on you engine (as listed above) is defective, the part will be repaired or replaced by Jonsered.

OWNER′S WARRANTY

RESPONSIBILITIES

As the small nonroad engine owner, you are responsible for the performance of the required maintenance listed in your Operator′s Manual. Jonsered recommends that you retain all receipts covering maintenance on your small nonroad engine, but Jonsered cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the small nonroad engine owner, you should, however, be aware that Jonsered may deny you warranty coverage if your small nonroad engine or a part of it has failed due to abuse, neglect, improper maintenance, unapproved modifications or the use of parts not made or approved by the original equipment manufacturer. You are responsible for presenting your small nonroad engine to a Jonsered authorized servicing dealer as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Jonsered, at Sweden +46-36-146500.

WARRANTY COMMENCEMENT DATE

The warranty period begins on the date small nonroad engine is delivered.

LENGTH OF COVERAGE

Jonsered warrants to the initial owner and each subsequent purchaser that the engine is free from defects in materials and workmanship which cause the failure of a warranted part for a period of two years.

WHAT IS COVERED

REPAIR OR REPLACEMENT OF PARTS Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Jonsered servicing dealer. If you have any questions regarding your warranty

rights and responsibilities, you should contact your nearest authorized servicing dealer or call Jonsered, at Sweden +46- 36-146500.

WARRANTY PERIOD Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for 2 years. Any warranted part which is scheduled for replacement as required maintenance shall be warranted for the period of time up to the first scheduled replacement point for that part.

DIAGNOSIS The owner shall not be charged for diagnostic labor which leads to the determination that a warranted part is defective, if the diagnostic work is performed at an approved Jonsered servicing dealer.

CONSEQUENTIAL DAMAGES Jonsered may be liable for damages to other engine components caused by the failure of a warranted part still under warranty.

WHAT IS NOT COVERED

All failures caused by abuse, neglect or improper maintenance are not covered.

ADD -ON OR MODIFIED PARTS

The use of add-on or modified parts can be grounds for disallowing a warranty claim. Jonsered is not liable to cover failures of warranted parts caused by the use of add-on or modified parts.

HOW TO FILE A CLAIM

If you have any questions regarding your warranty rights and responsibilities, you should contact your nearest authorized servicing dealer or call Jonsered, at Sweden +46-36-146500.

WHERE TO GET WARRANTY SERVICE

Warranty services or repairs shall be provided at all Jonsered authorized servicing dealers.

MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION-RELATED PARTS

Any Jonsered approved replacement part used in the performance of any warranty maintenance or repairs on emission-related parts, will be provided without charge to the owner if the part is under warranty.

EMISSION CONTROL WARRANTY PARTS LIST

1Carburetor and internal parts

2Intake pipe, airfilter holder and carburetor bolts.

3Airfilter and fuelfilter covered up to maintenance schedule.

4Ignition System

1 Spark Plug, covered up to maintenance schedule

2 Ignition Module

MAINTENANCE STATEMENT

The owner is responsible for the performance of all required maintenance, as defined in the operator’s manual.

English – 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Operator’s manual EPA Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the clearing saw? RS44 What is WHAT?What is what on the clearing saw? RS52 Personal protective equipment General Safety PrecautionsStop switch Machine′s safety equipmentThrottle lock Muffler Cutting attachment guardVibration damping system Quick releaseLocking screw Locking nutCutting equipment Cutting equipmentSharpening grass cutters and grass blades Trimmer head Sharpening the saw bladeTransport position, handlebar AssemblyFitting a blade guard, grass blade and grass cutter Fitting the blade guard and saw blade Blade guard a is fitted using 4 screws L as shownFitting other guards and cutting attachments Adjusting the harness and clearing sawStandard harness Vector harness Adjusting the harnessCorrect balance Fuel Handling Fuel safetyFuel Mixing FuelingCold engine Starting and StoppingCheck before starting Starting and stoppingStopping StartingABC of clearing Basic safety rulesWorking Techniques General working instructionsBrush cutting with a saw blade Forestry clearing using a saw bladeGrass trimming with a trimmer head Grass clearing using a grass bladeSweeping Carburetor MaintenanceHigh speed jet H RS52 Fine adjustment of the idle speed TLow speed jet L High speed jet H GR41, GR50, RS44Air filter Correctly adjusted carburetorMuffler Cooling systemBevel gear Cleaning the air filterSpark plug Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty StatementTrimmy SII Page ´z+R!o¶5*¨ Page 1150017-95 ´z+R!o¶5*¨ ´z+R!o¶5*¨

GR50 specifications

The Jonsered GR50 is a robust and versatile garden tractor that caters to the needs of both residential and professional gardeners. Designed for performance, the GR50 merges comfort and advanced technology, making it a popular choice among gardening enthusiasts.

One of the standout features of the Jonsered GR50 is its powerful engine. It comes equipped with a high-performance overhead valve engine that provides excellent torque and reliability. This engine ensures that the tractor can handle various terrain types and grass heights, making it ideal for both small and large lawns. Additionally, the high-efficiency engine minimizes fuel consumption while maximizing power output, making it an economical choice for users.

The GR50 offers an impressive cutting deck, which is available in various sizes to meet different mowing needs. The adjustable cutting height allows users to customize the grass length, ensuring a clean and even cut every time. The cutting deck design incorporates anti-scalp wheels, which help to prevent turf damage, especially on uneven surfaces. This feature is crucial for maintaining a healthy lawn and enhancing the overall appearance of outdoor spaces.

One of the key technologies integrated into the Jonsered GR50 is its hydrostatic transmission, which provides smooth and uninterrupted speed control. Users can easily adjust their mowing speed without constantly shifting gears, making it easier to navigate around obstacles or maneuver in tighter spaces. This feature significantly improves user experience and efficiency during mowing tasks.

Comfort is also a top priority in the design of the GR50. It features an ergonomically designed seat that is both adjustable and padded, allowing users to mow for extended periods without discomfort. The easy-to-use dashboard includes intuitive controls that enable quick adjustments and settings changes. This focus on user comfort and convenience makes the GR50 a delight to operate.

Furthermore, the Jonsered GR50 is designed with durability in mind. Its robust construction, combined with high-quality materials, ensures that it can withstand the rigors of regular use. This makes it a reliable investment for anyone looking to maintain their garden or lawn.

In summary, the Jonsered GR50 is a powerful, efficient, and comfortable garden tractor that embodies the perfect blend of technology and user-friendly features. With its strong engine, versatile cutting deck, hydrostatic transmission, and ergonomic design, it stands out as a top choice for gardening tasks. Whether for residential use or professional landscaping, the GR50 delivers exceptional performance and reliability.
Top Page Image Contents