Using the SR4400, → B → C ... Z → 1 → 2 → 3 .... → → +

“AUTO PRESET” will appear on the display, and scanning starts from lowest frequency.

3. Each time the tuner finds a station, scanning will pause and the station will be played for five seconds.

During this time, the following operations are possible.

• The band can be changed by TUNER button .

4.If no button is pressed during this period, the current station is memorized in location Preset 02

If you wish to skip the current station, press the TUNING button during this period, this station is skipped and auto presetting continues.

5.Operation stops automatically when all 30 preset memory positions are filled or when auto scanning attains the highest endof all bands. If you desire to stop the auto preset memory at anytime, press the CLEAR button.

MANUAL PRESET MEMORY

2. 4.				3.					OK
D RECEIVER SR4400
								SETUP/		MENU OFF
								T.TONE
								S-DIRECT	AUTO		DTS
							3.		1	2	3
								NIGHT	CSII	EX/ES	DSP
									4	5	6
CLEAR	MEMORY		TUNING/PRESET	F/P	MODE
								DISPLAY	M-CH ST	STEREO	6.1CH IN
A/D	HT-EQ			DISPLAY		MUTE	2.		7	8	9
								CLEAR	MEMO	A/D	P.SCAN
6.1 CH-IN		VCR1	CDR/MD	TAPE	CD	TUNER				0
										CHANNEL/SKIP
								BASS	TREBLE	TUNE/SEARCH
									MODE	DISP./RDS	F.DIRECT

(Using the SR4400)

1. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section).

2. Press the MEMORY button on the front panel. “– –“ (preset number) starts blinking on the display.

3. Select the preset number by pressing the TUNING or button, while this is still blinking (approx. 5 seconds)

4. Press the MEMORY button again to enter. The display stops blinking.

The station is now stored in the specified preset memory location.

(Using the remote control unit)

1. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section).

2. Press the MEMO button on the remote unite. “– –“ (preset number)starts blinking on the display.

3. Enter the desired preset number by pressping numeric buttons.

Note:

•When entering a single digit number (2 for example), either input “02” or just input “2” and wait for a few seconds.

RECALLING A PRESET STATION

	2.				1.			T.TONE
								SETUP/		MENU OFF
								S-DIRECT	AUTO		DTS
							1.		1	2	3
R SR4400								NIGHT	CSII	EX/ES	DSP
								NIGHT	CSII	EX/ES	DSP
									4	5	6
								DISPLAY	M-CH ST	STEREO	6.1CH IN
									7	8	9
								CLEAR	MEMO	A/D	P.SCAN
CLEAR	MEMORY	TUNING/PRESET		F/P	MODE		1.			0
										CHANNEL/SKIP
A/D	HT-EQ			DISPLAY	MUTE
6.1 CH-IN		VCR1	CDR/MD	TAPE	CD	TUNER		BASS	TREBLE	TUNE/SEARCH
									MODE	DISP./RDS	F.DIRECT

(Using the SR4400)

1. Press the F/P button to show the preset station on the display.

2. Select the desired preset station by pressing the TUNINGorbutton on the front panel

(Using the remote control unit)

1. Press the 4 or ¢ button to select the desired preset station, or input your desired preset channel with numeric buttons on the remote.

PRESET SCAN

	SETUP/		MENU OFF
1.	T.TONE
	S-DIRECT	AUTO		DTS
		1	2	3
	NIGHT	CSII	EX/ES	DSP
3.		7	8	9
		4	5	6
3.	DISPLAY	M-CH ST	STEREO	6.1CH IN
3.	CLEAR	MEMO	A/D	P.SCAN
			0
			CHANNEL/SKIP
3.	BASS	TREBLE	TUNE/SEARCH
3.		MODE	DISP./RDS	F.DIRECT
	+/A /ANT	–/B /VCR	ATT.	PTY
	DISC/DECK

(Using the remote control unit)

1. Press the P.SCAN on remote.

“PRESET SCAN” appears on the display and then the preset station with the lowest preset number is recalled first.

2. Preset stations are recalled in sequence (No.1

→No.2 → etc.) for 5 seconds each.

No stored preset number will be skipped.

3. You can fast forward the preset stations by pressping the § continuously.

When the desired preset station is received, cancel the preset scan operation by pressping the CLEAR or P.SCAN.

CLEARING STORED PRESET STATIONS

You can remove preset stations from memory using the following procedure.

		3.	2.			SETUP/		MENU OFF
		3.	2.				1	2	3
						T.TONE
						S-DIRECT	AUTO		DTS
					2.	NIGHT	CSII	EX/ES	DSP
	AV SURROUND RECEIVER SR4400SR4400				2.		7	8	9
	AV SURROUND RECEIVER SR4400SR4400						4	5	6
	SURROUND					DISPLAY	M-CH ST	STEREO	6.1CH IN
						CLEAR	MEMO	A/D	P.SCAN
								0
					3.			CHANNEL/SKIP
		CLEARCLEAR	MEMORYMEMORY	TUNING/PRESET
						BASS	TREBLE	TUNE/SEARCH
		A/D	HT-EQ
POWER ON/STANDBY	PHONES	6.1 CHCH--ININ	VCR1		CD		MODE	DISP./RDS	F.DIRECT
						+/A /ANT	–/B /VCR	ATT.	PTY

DISC/DECK

1. Recall the preset number to be cleared with the method described in “RECALLING” a preset station.

2. Press the MEMORY button on the front panel or press MEMO button on the remote.

3. Stored preset number blinks in the display for

5 seconds. While blinking, press the CLEAR button on the front panel or press CLEAR on the remote unit.

4. “xx CLEAR” appears on the display to indicate that the specified preset number has been cleared.

Notes:

•To clear stored all preset stations, press and hold the CLEAR and the F/P buttons for two seconds.

	NAME INPUT OF THE PRESET STATION.		ENGLISH
	This function allows the name of each preset

	channel to be entered using alphanumeric
	characters.
	Before name inputting, need to store preset
	stations with the preset memory operation.

4.4. 2. 5. 6. 5.

AVAV SURROUNDSURROUND RECEIVERRECEIVER SR4400SR4400

	SURROUNDSURROUND									V
										DOWN
			CLEARCLEAR	MEMORYMEMORY		TUNING/PRESETTUNING/PRESET		F/P	MODE
			A/D	HT-EQ				DISPLAY		MUTE
POWER ON/STANDBY	PHONES	6.1 CHCH--ININ	TV	DVD	VCR1	DSS/VCR2	CDR/MD	TAPE	CD	TUNER

2. 5. 6.	NIGHT	CSII	EX/ES	DSP
2. 5. 6.		7	8	9
		4	5	6
3.	DISPLAY	M-CH ST	STEREO	6.1CH IN
3.	CLEAR	MEMO	A/D	P.SCAN
			0
			CHANNEL/SKIP
5.	BASS	TREBLE	TUNE/SEARCH
5.		MODE	DISP./RDS	F.DIRECT
4.	+/A /ANT	–/B /VCR	ATT.	PTY
4.	DISC/DECK

SYSTEM REMOTE CONTROLLER

RC5400SR

1. Recall the preset number to be inputted name with the method described in “RECALLING” a preset station.

2. Press the MEMORY button on the front panel or press MEMO on the remote for more than 3 seconds.

3. The left most column of the station name indicator flashes, indicating the character entry ready status.

4. When the SELECT knob is turned or press 5

/6 button on the remote, alphabetic and numeric characters will be displayed in the

following order:

A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → +

→/ → (Blank) → A UP →

←DOWN

To clear the input charcter, press the CLEAR button on the front panel or on the remote.

5. After selecting the first character to be entered, press the MEMORY button on the front panel, or press MEMO button on the remote.

The entry in this column is fixed and the next column starts to flash. Fill the next column same as.

SR4400 specifications

The Marantz SR4400 is a standout piece of audio equipment that epitomizes high-performance home theater receivers. Renowned for its exceptional sound quality and user-friendly features, the SR4400 has won the hearts of audio enthusiasts and casual listeners alike. This receiver is a perfect blend of advanced technology and classic Marantz aesthetics, which makes it a timeless addition to any home theater setup.

One of the standout features of the SR4400 is its multichannel processing capability, supporting both Dolby Digital and DTS formats. This enables users to enjoy a full cinematic experience right in their living rooms, as the receiver can decode up to 6.1 channels, providing rich and immersive surround sound. The SR4400 boasts a power output of 80 watts per channel, ensuring that it can drive a variety of speakers with clarity and authority, making it suitable for both music and movie playback.

The SR4400 also comes equipped with a range of input options, including multiple HDMI ports. This ensures seamless connectivity with modern devices such as Blu-ray players, gaming consoles, and streaming devices. Additionally, the receiver features composite, component, and optical connections, catering to older technology as well. An important aspect of the SR4400 is the built-in AM/FM tuner, allowing users to enjoy their favorite radio stations without the need for additional equipment.

Marantz has always emphasized quality components, and the SR4400 is no exception. It features high-quality capacitors and a robust power supply, contributing to its low distortion and high signal-to-noise ratio. The receiver also includes advanced digital signal processing (DSP) which enhances audio playback by allowing users to select various sound modes, tailoring the listening experience to individual preferences.

One of the user-friendly aspects of the SR4400 is its intuitive on-screen setup menu, which makes it accessible even for those new to home theater systems. The remote control is also thoughtfully designed, offering easy access to all essential functions.

In conclusion, the Marantz SR4400 is a versatile and powerful home theater receiver that combines advanced technology with exceptional sound quality. Its rich feature set and robust build make it a worthy investment for anyone looking to elevate their audio experience. Whether for music or movies, the SR4400 stands out as a reliable and high-performance choice in the competitive receiver market.

MANUAL PRESET MEMORY

(Using the SR4400)

(Using the remote control unit)

RECALLING A PRESET STATION

(Using the remote control unit)

PRESET SCAN

MODE

(Using the remote control unit)

1. Press the P.SCAN on remote.

CLEARING STORED PRESET STATIONS

3. Stored preset number blinks in the display for

ENGLISH

6.1 CHCH--ININ

VCR1

DSS/VCR2

CDR/MD

TAPE

TUNER

A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → +

←DOWN

SR4400 specifications