Marantz SR4320 manual Names and Functions, Front Panel

NAMES AND FUNCTIONS

FRONT PANEL

qPOWER ON/STANDBY switch and

STANDBY indicator

When this switch is pressed once, the unit turns ON and display appear on the display panel.

When pressed again, the unit enters the standby mode and the STANDBY indicator lights.

To turn the power ON from standby mode, press any of the function buttons of the main unit or the MAIN POWER button of the remote control unit.

When the STANDBY indicator lights up, the apparatus is NOT disconnected from the AC supply mains.

wPHONES jack for stereo headphones

Conventional dynamic headphones can be plugged in here.

Note:

When using headphones, the speaker A and/or B are switched automatically to OFF and the sound from the speakers is muted. The speaker A and/or B return to the previous setting as soon as the plug is removed from the jack.

eMULTI-JOG control knob

Turn the control (BALANCE, TREBLE or BASS) knob selected by the JOG MODE button to adjust (the balance, treble or bass).

rFunction selector buttons

These buttons are used to select the sources. The selected source name will be displayed on the front display.

The video function selector, such as DVD, VCR and DSS, selects video and audio simultaneously.

Audio function sources such as CDR/MD, TAPE, CD, PHONO and TUNER may be selected in conjunction with a Video source.

This feature (Sound Injection) combines a sound from one source with a picture from another.

Choose the video source first, and then choose a different audio source to activate this function.

tJOG MODE button

Press this button to adjust BALANCE and TONE CONTROL (BASS/ TREBLE). Each time this button is pressed, the mode changes as BAL (BALANCE) → TRE (TREBLE) → BASS → BAL (BALANCE). If this button is pressed in Source Direct Mode, Source Direct is cancelled.

ySPEAKERS (system A or B) button

Press this button to select speaker system(s) to use. Each time this button is pressed, the selected speaker(s) is changed as, only A is on

→only B is on → both A and B are on → both A and B are off. The corresponding indicator(s) of the active speaker system(s) light up.

If headphones are connected, both A and B are set off automatically.

uS (Source)-DIRECT button

When this button is pressed, the audio signal will bypass the balance and tone control circuit to provide the pure sound quality.

To return not to bypass the balance and tone control circuit, press S-DIRECT button again or press JOG MODE button.

iSLEEP (Sleep timer) button

This button is used for setting the sleep timer.

oMUTE button

Press this button to mute the output to the speakers. Press it again to return to the previous volume level.

!0CLEAR button

Press this button to clear the tuner preset station.

!1MEMORY button

Press this button to enter the tuner preset memory numbers and station names.

!2TUNING/PRESET up ( ) and down ( ) buttons

During reception of AM or FM, you can scan the other frequencies or select another preset station pressing these buttons.

!3F (Frequency)/P (Preset) button

During reception of AM or FM, you can change the function of the UP/ DOWN buttons for scanning frequencies or selecting preset stations by pressing this button.

!4MODE button

Press this button to select AUTO mode or MONO mode when the FM band is selected.

!5SPEAKERS indicator

These indicators show active speaker system(s).

!6DISPLAY OFF indicator

Lights up when you select “Display off”.

!7Infrared sensor

This sensor receives infrared signals from the remote control unit.

!8VOLUME control knob

Adjusts the overall sound level. Turning the control clockwise increases the sound level.

!9Display

ENGLISH

3