Marantz SR3001 Speakers Level Setting Without Test Tone, Speakers Level Setting with Test Tone

ENGLISH

2-3. SPEAKERS LEVEL SETTING WITH TEST TONE

Here you will set the volume for each speaker so that they are all heard by the listener at the same level. Moreover, if the T.TONE button is pressed, unit can enter into this menu directly.

Note:

The speaker level settings are not available in 7.1 Channel Input mode, CS mode and Multi Channel Stereo mode.

T(TEST) MODE :

Selects “MANUAL” or “AUTO” for generating mode of test tone 1 or 2 cursor button.

1. When you select “MANUAL” in T-MODE menu by pressing the 1 or 2 button, this unit will emit a pink noise from the front left speaker. At this time, adjust the desired level of the master volume. Remember the level of this noise and then press the 4 button. This unit will emit the pink noise from the center speaker.

2. Using the 1 and 2 cursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker (Note that this can be adjusted to any level between –10 and +10 dB in 1dB intervals).

MENU STRUCTURE of Speaker Level setup

Direct selec	Speakers
by remote	Distance	Test Tone mode
control	setup
		MANU	AUTO
			(Auto)
		Speaker
			SW
	Speakers	L	C	R
	Level setup
			Listening
		SL	Positiom	SR

If you select “AUTO” by pressing the 4 button, the test tone will be cycled through in a circular pattern which is L (Left) → C (Center) → R (Right) → SR (Surround Right) → SBR (Surround Back Right) → SBL (Surround Back Left) → SL (Surround Left) → SW (Subwoofer) → L →.. increments of 2 seconds for each channel.

Using the 1 and 2 cursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all speaker.

Press the ENTER button, you can stop the test tone mode. Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the

SETUP MENU.

Or press the 1 or 2 cursor button to select “RETURN” then press the ENTER button to return the previous “2-2. Speakers Distance” setup.

Maximum

1 dB interval

Reference

1 dB interval

Minimum

+10dB

+9dB

button

0dB

button

-9dB

-10dB

(SW -15 dB)

		SBL			SBR
TO MAIN MENU				RETURN			EXIT
	MAIN			Speakers		exit SETUP
	MENU		Distance setup				MENU

2-4. SPEAKERS LEVEL SETTING WITHOUT TEST TONE

If you select “MANUAL”, adjust the output level of each speaker as follow.

1. 3. 5. 1. 5. 1. 2. 5. 5.

AV SURROUND RECEIVER SR3001

INPUT SELECTOR

3. Press the 4 cursor button again. This unit will now emit the pink noise from the front right speaker.

4. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level.

Channel level (speaker level) can be adjusted without using test tone.

Note:

Four channel level settings can be memorized for reproduction: the 7.1 ch input mode, CS mode, Multi channel stereo mode, and all other surround modes,

SURROUND

5.

DISP

MULTI

AUTO

TUNED

ST

V – OFF

NIGHT

PEAK

ATT

ANALOG

SLEEP

AUTO SURR

DIRECT

DISC 6.1

MTX 6.1

EQ

DIGITAL

DIGITAL

L

R

AAC PCM

SURROUND

PURE

SIMPLE

MODE

DIRECT

SETUP

DISPLAY

MEMORY

CLEAR

7.1CH INPUT

S. SPEAKER B

STANDBY

ENTER

AUTO

HT-EQ

MENU

EXIT

BAND

T-MODE

POWER ON/OFF

PHONES

Press the ENTER button, you can stop the test tone mode. Or press the 1 or 2 cursor button to select “EXIT” then press the ENTER button to exit the SETUP MENU.

Or press the 1 or 2 button to select “RETURN” then press the ENTER button to return the previous “2-2. Speakers Distance” setup.

respectively.

1. Set the surround mode or 7.1 ch input mode which you want to adjust the channel level.

2. Press the CH.SEL button on the remote.

							Notes:
			AUX1	AMP			• Speakers that you selected “None” for in the Speaker
2.	5.	TV			MAIIN		Size Setup menu will not appear.
		VOL.	SLEEP	MUTE	VOL.
							• The setup level for each channel is memorized for
1. 5.			OSD	MENU			reproduction in all surround mode by this method
							exclude CS mode, Multi channel stereo mode and
			ENTER				7.1 ch input mode.
1. 3. 5.			SET UP/			5.	• To adjust the speaker levels for 7.1-channel input
				MENU OFF			sources, you will need to use the 7.1CH Level Input
			T.TONE
		PURE DIRECT AUTO			DTS
			1	2	3		setup menu.
		NIGHT	CSII	EX/ES	VIRTUAL
			4	5	6

3. Select the desired channel (speaker) with the 1 or 2 cursor buttons.

4. Adjust the level with the 3 or 4 cursor buttons.

5. After completing the setup, press the CH.SEL button again.

20