Deluxe Overbed Table
Assembly, Installation and Operating Instructions
Model Nos. 6417, 6418
SAVE THESE INSTRUCTIONS
NOTE: Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact Carrier/Dealer for further instruction.
Safety Summary
To ensure the safe and proper installation of the deluxe overbed table, these instructions MUST be followed:
WARNING
DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and any additional instructional material such as owner’s manuals, service manuals or instruction sheets supplied with this product or optional equipment. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical personnel before attempting to use this equipment - otherwise, injury or damage may occur.
ALWAYS check the overbed table for proper tightness before using. The Deluxe Overbed Table has a weight limitation of 25 lbs.
ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.
INSTALLATION WARNING
After any adjustments, repair or service and before use, make sure that all attaching component parts are secure.
Assembling the Overbed Table - Model 6417
NOTE: For this procedure, refer to FIGURE 1 on page 2.
1.Invert the top board and place on floor.
2.Install the mast onto the top board with six mounting screws. Tighten securely.
3.Attach the base above the mast with the two bolts, washers, and inserts.
4.Install the four casters into the four holes provided in the base.
5.Flip the overbed table back to the upright position.
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
Part No 1143201 | 1 | Deluxe Overbed Table |