Marantz SR4500 manual Troubleshooting, Symptom Cause Remedy

Page 38

ENGLISH

TROUBLESHOOTING

In case of trouble, check the following before calling for service:

1.Are the connections made properly ?

2.Are you operating the unit properly following the user’s guide ?

3.Are the power amplifiers and speaker working properly ?

If the unit does not operate properly, check items shown in the following table.

If your trouble cannot be recovered with the remedy actions listed in the following table, malfunction of the internal circuitry is suspected; immediately unplug the power cable and contact your dealer, nearest Marantz authorized dealer or the Marantz Service Center in your country.

SYMPTOM

CAUSE

REMEDY

 

 

 

SR4500 cannot be turned up.

The power plug is not connected.

Connect the power plug to the outlet.

 

 

 

No sound and picture are

Mute is on.

Cancel mute using the remote control unit.

output even when power is on.

 

 

The input cable is not connected correctly.

See the connection diagram and connect the

 

 

 

cables correctly.

 

 

 

 

The master volume control is turned all

Adjust the master volume.

 

the way down.

 

 

 

 

 

The function selector position is wrong.

Select correct position.

 

 

 

No speaker output.

The headphones are connected to the

Disconnect the headphones. (Speakers will not

 

headphone jack.

output sound when headphones are connected.)

 

 

 

Incorrect Audio or Video for

Input cable connected incorrectly.

Connect the cable correctly by referring to the

selected source.

 

connection diagram.

 

 

 

Incorrect Audio from a channel.

Speaker cable connected incorrectly.

Connect the cable correctly by referring to the

 

 

connection diagram.

 

 

 

No Audio output from the

The center speaker cable connection is

Connect the cable correctly.

center channel speaker.

incomplete.

 

 

 

 

 

STEREO has been selected for Surround

When STEREO is selected for Surround mode, no

 

mode.

sound will be output from the center speaker. Set

 

 

another Surround mode.

 

Center = NONE has been selected in

Make the correct setting.

 

SETUP mode.

 

 

 

 

No Audio output from the

The surround speaker cable connection

Connect the cable correctly.

surround speakers.

is incomplete.

 

 

 

 

 

STEREO has been selected for Surround

When STEREO has been selected for Surround

 

mode.

mode, no sound will be output from the surround

 

 

speaker. Set another Surround mode.

 

 

 

 

Surround = NONE has been selected in

Make the correct setting.

 

SETUP mode.

 

 

 

 

No Audio output from the

The surround back speaker cable

Connect the cable correctly.

surround back speakers.

connection is incomplete.

 

 

Surround mode is not EX/ES mode.

Set surround mode EX/ES.

 

 

 

 

Surround back = NONE has been

Make the correct setting.

 

selected in SPEAKERS SIZE SETUP

 

 

 

 

SYMPTOM

CAUSE

REMEDY

 

 

 

Can not select EX/ES mode.

Surround center= NONE has been

Make the correct setting.

 

selected in SPEAKERS SIZE SETUP

 

 

 

 

 

Input signal is incompatible.

Use 5.1channel source.

 

 

 

Can not select Pro Logic IIx

Input signal is incompatible.

Use 2 channel Dolby Digital input signal, PCM input

mode.

 

signal or analog input signal.

 

 

 

Can not select Neo:6 mode.

Input signal is incompatible.

Use 2 channel Dolby Digital input signal, PCM input

 

 

signal or analog input signal.

 

 

 

Can not select CSII mode.

Input signal is incompatible.

Use 2 channel Dolby Digital input signal, PCM input

 

 

signal or analog input signal.

 

 

 

No output to Sub Woofer Out.

Sub-woofer = NONE has been selected

Select Sub-woofer = YES.

 

in SETUP mode.

 

 

 

 

Noise is produced during DTS-

Analog has been selected for input.

Be sure to perform digital connection, select digital

encoded CD or laser disc play.

 

input, then play.

 

 

 

A specific channel does not

Nothing recorded on source.

Check the encoded channel on the source side.

produce output.

 

 

 

 

 

FM or AM reception fails.

Antenna connection is incomplete.

Correctly connect the indoor FM and AM antennas

 

 

to FM and AM antenna outlets.

Noise is heard during AM

Reception is affected by other electrical

Try changing location where the AM indoor

reception.

fields.

antenna is set up.

 

 

 

Noise is heard during FM

The radio waves from the broadcasting

Install an FM outdoor antenna.

reception.

station are weak.

 

 

 

 

Cannot get programmed

Preset data has been erased.

Disconnecting power plug for long periods of time

station when the PRESET

 

will erase preset data. If that happens, input the

button is pressed.

 

preset data again.

 

 

 

Control with the remote

Batteries are consumed.

Replace all the batteries with new ones.

control unit fails.

 

 

Remote controller's function-key

Select different position from which equipment will

 

 

setting is wrong.

be controlled.

 

 

 

 

The distance between this SR4500 and

Move closer to this SR4500.

 

the remote commander is too far.

 

 

 

 

 

Something is blocking SR4500 and the

Remove offending object.

 

remote commander.

 

 

 

 

34

Image 38
Contents Model SR4500 User Guide For U.K. only English WarrantyRetain Your Purchase Receipt Français GarantieDeutsch EnglishFrançais NederlandsPortuguês EspañolItaliano SvenskaTable of Contents Foreword Description PrecautionsIntroduction About Dolby Pro LogicRemote Controller RC5500SR FeaturesAccessories Front Panel FL Display DVD, VCR1, DSS/VCR2 Rear Panel⁄07.1 Channel Input AC OutletRemote Control Operation Function and Operation¤5TV Volume UP /DOWN buttons ¤2SETUP / T.TONE button¤4SLEEP sleep timer button ¤1PURE Direct buttonTuner Mode Operation of Remote Control UnitAMP Mode General Information of RC5500SR to SR4500Contrable Function Table Connecting Speaker Wire Speaker PlacementConnecting Speakers ConnectionsConnecting Digital Audio Components Connecting Audio ComponentsConnecting a Subwoofer Video jack Connecting Video ComponentsVIDEO, S-VIDEO , Component Jacks Component jackConnecting Multi Channel Audio Source Connecting AN External Power AmplifierConnecting AN FM Outdoor Antenna Connecting the Antenna TerminalsConnecting the Supplied Antennas Connecting AN AM Outdoor AntennaEnter the Desired Menu Item Setup Menu SetupSetup Menu System Menu StructureSimple Setup Input Setup Assignable Digital InputLarge Speaker SetupSpeakers Size SmallSpeakers Distance SL&SRTtest Mode Menu Structure of Speaker Level setupSurround Surround setting groupPreference CS II Circle Surround Dolby PRO LogicMusic Parameter Basic Operation Surround Mode Pure Direct VirtualStereo Mode and the input signal Relation between the selected surroundDisplay off mode, the display is off completely Other FunctionVideo ON/OFF HT-EQ CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in the record modeRecording AN Analog Source CH InputVolume level of each channel CH Input LevelPreset Memory Sorting Preset Stations Recalling a Preset StationPreset Scan Clearing Stored Preset StationsRDS Display RDS OperationRadio Text Programme Type PTY DisplayVolume of S. Speaker B is interlocked with the main volume Surround Speaker B SystemTroubleshooting Symptom Cause RemedyFications DimensionsTechnical Speci Setup Codes 0081, 0057, 1481, 0733 Harman/Kardon0074, 0081, 0181, 0183 0120, 0177, 1277, 0205Iii Japan Europe

SR4500 specifications

The Marantz SR4500 is a high-performance AV receiver that has earned a reputation for its exceptional sound quality, user-friendly interface, and versatile connectivity options. Designed for both home theater enthusiasts and casual listeners, the SR4500 brings together advanced technologies and a variety of features to enhance the audio and visual experience.

One of the main highlights of the SR4500 is its powerful amplification system. It delivers up to 100 watts per channel, which is sufficient to fill even large rooms with rich, dynamic sound. The receiver employs a discrete output stage, ensuring that each channel operates independently for improved sound clarity and precision. This means that whether you're enjoying a high-octane action movie or a soothing classical performance, the audio reproduction remains true to the original recording.

In terms of connectivity, the SR4500 is equipped with an array of inputs and outputs. It features multiple HDMI ports that support both video and audio signals, allowing for seamless integration with modern devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver also supports various audio formats, including Dolby Digital and DTS, providing immersive surround sound experiences.

Marantz is renowned for its audio processing capabilities, and the SR4500 is no exception. It utilizes the latest DSP technology to decode surround sound formats and provides multiple listening modes to suit the content being played. This ensures that whether you are watching films, listening to music, or playing video games, you can select the optimal audio setting for the best experience.

Another characteristic of the SR4500 is its user-friendly interface. The receiver features an intuitive on-screen menu that makes it easy to navigate through settings and options. Additionally, it comes equipped with an efficient auto-calibration system that adjusts speaker settings based on your room's acoustics, ensuring optimal sound performance without the need for complex manual adjustments.

The Marantz SR4500 also emphasizes build quality and aesthetic appeal. The solid chassis and premium components contribute to its durability and reliability, while the elegant design fits seamlessly into any home entertainment setup.

Overall, the Marantz SR4500 is an outstanding choice for anyone looking to enhance their audio and video experience. With its powerful amplification, extensive connectivity options, advanced processing features, user-friendly interface, and stylish design, it stands out as a versatile and high-quality AV receiver that caters to a wide range of home entertainment needs.