HTC Z4824, Z4619, Z5426BF, Z4220BF, Z4219 manual Lifting Lever for the Mower Deck, Accessories

CONTROLS

Lifting Lever for the Mower Deck

The deck cutting height is achieved with the foot pedal. To lift the deck, press the foot pedal forward.

To lower the deck, apply pressure to the top side of the foot pedal and allow the pedal to pivot while allowing the lift arm to rotate to the rear of the unit.

To stop at the desired cutting position, rotate the pedal down into the notch in the height plate. The cutting height range is from 1½" (38mm) to 5" (127mm) in ½" (13mm) increments. The heights are measured from the ground up to the blade tip with the engine not running.

IMPORTANT INFORMATION

In order to obtain an even cutting height it is important that the air pressure in all four tires is the same 15 psi (1 bar).

Accessories

For mulching, there is a BioClip attachment available. The BioClip is mounted underneath the mower deck and includes a discharge cover and blades.

4

1

/

2

4

3

1

/

2

3

2

1

/

2

2

1

1

/

2

8011-753

Cutting height pedal

English-23