Hubbell UH18 manual Hose Installation Reference Drawing, Gleason Reel Corp, Hubbell Company

Page 4
HOSE REMOVAL
Use the following procedure to remove worn or damaged hose from reel prior to installation of new hose.
1. Move machine serviced by reel to a position closest to reel. Spring will still be under pre-tension at this point.
12. Replace inspection cover.
Figure 4
9. Tighten bolts securing spring housing to reel frame.
10. Connect free end of hose to connections on machine or adjust hose stop so that desired length of hose extends from reel.
11. Tension spring with spanner wrench. Refer to INSTALLATION section.

SPOOL

PAWL

 

SPRING HUB

 

 

SHAFT

 

 

(Spring not

 

 

 

shown)

 

SPRING

 

SHAFT

SIDE VIEW

Install

END VIEW

GROOVE

against flat

 

 

4. Unwrap hose without allowing spool to turn.

5. Disconnect hose from elbows inside spool wrapper.

6. Install new hose following directions below.

HOSE INSTALLATION

Use the following procedure to replace hose or if reel was ordered without hose. Refer to HOSE INSTALLATION REFERENCE DRAWING, below.

1. Unspool new hose from shipping spool and lay out to

eliminate twist.

NOTE: This step is not essential, but will aid in winding operation of the reel and prolong hose life.

2. Insert hose end through guide and connect to elbows inside spool wrapper. (See drawing below.)

5. Wind the hose onto the reel spool by hand rotating spool in direction it turns free of spring tension.

(Normally clockwise when viewed from spring side)

2. Turn off supply pressure to reel.

3. Disconnect hose from machine or other attachments. Remove hose stop, if installed, and allow hose to retract onto spool. Ensure all tension is off spring by manually rotating spool (normally clockwise when viewed from spring side).

6. Adjust hose stop (not used on machine pull reel).

7. Complete working end connections.

8. Pretension reel and complete installation as described in REEL INSTALLATION section.

HOSE INSTALLATION REFERENCE DRAWING

 

STANDARD SPOOL

OPTIONAL

STANDARD SPOOL

 

 

 

 

ROTATION DIRECTION

VERTICAL

ROTATION DIRECTION

 

 

HORIZONTAL HOSE

TO WIND HOSE WHEN

HOSE GUIDE

TO WIND HOSE WHEN

GUIDE POSITION

VIEWED FROM

LOCATION–

VIEWED FROM

(STANDARD)

SPRING SIDE

REEL

FITTING SIDE

 

 

 

MOUNTED

 

 

 

 

BASE UP

 

 

 

 

 

 

 

 

SPRING

 

 

 

 

MOTOR

ELBOW–

 

SPOOL

SPOOL

SPOOL

CONNECT

 

DISK

DISK

SPOOLED

 

 

 

WRAPPER

HOSE HERE

 

HOSE ON

 

SECTIONS

 

 

SPOOL

 

 

ADJUSTABLE

 

SWIVEL

 

 

HOSE STOP

 

FITTING

 

 

 

 

ATTACH SUPPLY LINE HERE

 

 

 

NOTE: SUPPLY MUST BE

 

 

 

FLEXIBLE LINE. DO NOT

 

 

 

HARD PLUMB.

 

OPTIONAL

HOSE STOP

 

 

 

HORIZONTAL

MOUNTING

 

 

HOSE GUIDE

 

BASE

 

 

LOCATION

VIEW FROM FITTING SIDE

 

 

VIEW FROM SPRING SIDE

HUBBELL

 

®

GLEASON REEL CORP.

 

P.O. Box 26 • 600 South Clark St.

 

 

 

 

Mayville, WI 53050–0026

®

 

Phone 920–387–4120 • Fax 920–387–4189

 

A Hubbell Company

 

 

Printed in USA

Bulletin No. 042868.b

Image 4
Contents Installation MaintenanceSpring Replacement UH18 Universal Hose REEL-DIRECT DriveAccessory Code Reel Model Number StructureDescription QTY UH 18 80 1 08 10 06 1 HSDDOG & Ratchet Spool LockRoller Hose Guides Hose Stops 340O Pivot BaseHose Installation Hose Installation Reference DrawingGleason Reel Corp Hubbell Company

UH18 specifications

The Hubbell UH18 is a cutting-edge lighting fixture designed for advanced illumination solutions in various commercial and industrial settings. Known for its versatility and robust performance, the UH18 fits seamlessly into environments that require both aesthetic appeal and functional reliability.

One of the standout features of the UH18 is its energy efficiency. Utilizing LED technology, this fixture significantly reduces energy consumption compared to traditional lighting methods. LEDs not only provide enhanced brightness but also have a longer lifespan, minimizing maintenance costs and replacement frequency. The UH18 is designed to meet various energy codes and standards, making it an environmentally friendly choice for modern facilities.

The UH18 incorporates advanced optical technology, providing uniform light distribution and minimizing glare. This characteristic is particularly beneficial in spaces such as offices, warehouses, and retail locations, where the comfort of employees and customers is a priority. The fixture also offers a range of lumen outputs, allowing for tailored lighting solutions based on specific application needs.

Flexibility is another key characteristic of the Hubbell UH18. It comes with multiple mounting options, including pendant, surface, and wall-mounted configurations, providing versatility for varying installation requirements. Additionally, the UH18 is designed to withstand challenging environments, with robust materials resistant to corrosion and impact, ensuring durability in demanding settings.

The incorporation of smart technology is a significant advancement of the UH18. It can be integrated with lighting control systems that enable features such as dimming, motion sensing, and scheduling. This capability allows facilities managers to optimize energy use and enhance user experience by adjusting lighting based on occupancy and time of day.

The design of the UH18 is sleek and modern, with a minimalist aesthetic that complements diverse architectural styles. Its compact size and discreet profile ensure it can blend seamlessly into various environments without being obtrusive.

In summary, the Hubbell UH18 stands out for its energy efficiency, advanced optical performance, flexibility in installation, durability, smart technology integration, and modern design. These features make it an ideal choice for facilities looking to enhance their lighting ecosystem, improve energy savings, and ensure user comfort across different applications.