Homelite UT08934D Spark Arrestor, Cleaning the Exhaust Port and Muffler, Fuel CAP, Spark Plug

Page 13

MAINTENANCE

SPARK ARRESTOR

The muffler is equipped with a spark arrestor screen inside muffler body. After extended use the screen can become dirty and may need to have the muffler replaced by an authorized servicing dealer.

WARNING:

To avoid a fire hazard, never run the blower without the spark arrestor in place.

CLEANING THE EXHAUST PORT AND MUFFLER

Depending on the type of fuel used, the type and amount of oil used, and/or the operating conditions, the exhaust port and muffler may become blocked with carbon deposits. If you notice low power from the blower, have a qualified service technician check the exhaust port and muffler for carbon deposits. Removing the carbon deposits should restore performance to the blower.

FUEL CAP

WARNING:

A leaking fuel cap is a fire hazard and must be replaced immediately.

The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine performance. If performance improves when the fuel cap is loosened, the check valve may be faulty or filter clogged.

Replace the fuel cap if required.

SPARK PLUG

This engine uses a Champion RCJ-6Y with 0.63 mm (0.025 in.) electrode gap. Use an exact replacement and replace annually.

STORAGE (1 MONTH OR LONGER)

nDrain all fuel from the tank into a container approved for gasoline. Run engine until it stops.

nClean all foreign material from the blower. Store it in a well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

nAbide by all Federal and local regulations for the safe storage and handling of gasoline. Excess fuel should be used up in other 2-cycle engine powered equipment.

Page 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsSpecific Safety Rules General Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsService Product Specifications Assembly FeaturesInstalling the Vacuum Tubes Installing the Vacuum BAGAssembling the Blower Tubes See Figures 3Premium Exact MIX OperationApplications Mixing the FuelOperating the Blower Starting and StoppingSee Figures 7 See Figures 9Vacuum Operation Cruise Control Throttle LockWide Sweeper Nozzle High Velocity Throttle Trigger General Maintenance MaintenanceReplacing and Cleaning the AIR Filter Spark Arrestor Cleaning the Exhaust Port and MufflerFuel CAP Spark PlugDealer. See Figure TroubleshootingSpeed. See Figure NeedleLimited Warranty Statement WarrantyMANUFACTURER’S Warranty Coverage Call US First AccessoriesThis Product WAS Manufactured with a Catalyst Muffler Model Number California PropositionHomelite Consumer PRODUCTS, INC
Top Page Image Contents