Homelite UT08072, UT08572 manual Starting and Stopping, Operating the Blower, See Figures 8

Page 11

OPERATION

STARTING AND STOPPING

See Figures 8 - 9.

TO START:

nPlace the blower on a flat, bare surface. �n Disengage the trigger lock.

nPush the primer bulb, slowly, 7 times.

nDo not engage the handle while starting.

nSet choke to START position.

nPull the starter handle until the engine runs.

nAllow the engine to run 15 seconds, then engage the trigger to operate

TO STOP:

Release the trigger and press STOP ( O ) until the engine stops.

TO REMOVE BLOWER:

nMove harness straps off your shoulders and let straps slide down arms.

nGrasp the straps and lower the blower to the ground.

WARNING

Do not allow familiarity with the product to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

OPERATING THE BLOWER

See Figure 10.

nSlip arm through harness strap and onto shoulder, then repeat for the other shoulder. Adjust the straps to a com- fortable position. Refer to “Adjusting Harness Straps” earlier in this manual. Then remove unit for starting.

nStart the blower. Refer to “Starting and Stopping” earlier in this manual.

nPut on the blower again. The unit should be operated from the right side as shown in figure 10.

nTo keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly into the center of a pile.

nTo reduce sound levels, limit the number of pieces of equipment used at any one time.

nOperate blower at the lowest possible throttle speed to do the job.

nCheck your equipment before operation, especially the muffler, air intakes, and air filters.

nUse rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen surfaces when water is available.

11

THROTTLE

TRIGGER

TRIGGER SWITCH

LOCK

Fig. 8

PRIMER BULB

FULL

CHOKE

CHOKE LEVER

RUN

Fig. 9

 

PROPER OPERATING

POSITION

Fig. 10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsSpecific Safety Rules General Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsService Product Specifications FeaturesAssembly FeaturesSee Figures 2 Assembling the Blower TubesSee Figures 6 Adjusting Harness StrapsAssembling Harness Straps Premium Exact MIX Filling the Tank OperationMixing the Fuel See Figures 8 Starting and StoppingOperating the Blower Lubrication MaintenanceGeneral Maintenance Replacing and Cleaning the AIR FilterAccessories Speed. See Figure TroubleshootingLimited Warranty Statement WarrantyMANUFACTURER’S Warranty Coverage Call US First California Proposition Service Repair Parts

UT08072, UT08572 specifications

The Homelite UT08572 and UT08072 are robust and versatile outdoor power tools designed to tackle a variety of landscaping tasks. Known for their reliability, these two models cater to homeowners and professionals seeking effective solutions for yard maintenance.

One of the standout features of the UT08572 is its strong 26cc 2-cycle engine, which delivers excellent performance while maintaining fuel efficiency. The engine's design ensures that it produces lower emissions, making it an environmentally friendly option for users conscious of their carbon footprint. Similarly, the UT08072 also boasts a powerful engine, providing sufficient power for different cutting tasks, from trimming grass to edging and even light brush clearing.

Both models incorporate advanced technologies that enhance usability. The UT08572 is equipped with a lightweight design, making it easy to maneuver in tight spaces or when working for extended periods. The adjustable handle adds to user comfort, allowing for personalized positioning based on height and preference. The UT08072 features a straight shaft design, which is particularly beneficial for reaching under shrubs or navigating around obstacles without straining the back.

Easy starting systems are another highlight for both models. They come with a primer bulb that reduces the amount of effort needed to start the engine, making it accessible for users of all experience levels. The fuel tank is designed for easy filling and has a transparent window that allows users to monitor fuel levels without any hassle.

The cutting attachment is designed for versatility, with the UT08572 offering a combination of a string trimmer head and the option to switch to a blade for tougher tasks. This capability makes it ideal for a wide range of applications in maintaining a yard. The UT08072, on the other hand, boasts a dual-line trimming system that enhances cutting efficiency and ensures a cleaner finish.

Durability is another important characteristic of these models. Constructed with high-quality materials, they can withstand the rigors of regular use, whether it's for residential garden care or professional landscaping jobs. Moreover, the ergonomic design reduces vibrations, allowing for a comfortable experience even during long working sessions.

In summary, the Homelite UT08572 and UT08072 are exemplary outdoor power tools that combine power, efficiency, and user-friendly features. Their innovative technologies and practical designs make them suitable choices for anyone looking to maintain their outdoor spaces effectively. Whether you are trimming, edging, or clearing heavy brush, these models are equipped to handle various tasks with ease and reliability.
Top Page Image Contents