Homelite UT08012, UT08512 manual Operation, Mixing the Fuel, Premium Exact MIX, Filling the Tank

Page 9

OPERATION

WARNING:

Do not allow familiarity with tools to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.

WARNING:

Gasoline is extremely flammable and explosive. A fire or explosion from gasoline will burn you and others.

MIXING THE FUEL

This product is powered by a 2-cycle engine and requires premixing gasoline and 2-cycle oil. The mixture should be at a 50:1 ratio, using Premium Exact Mix™ 2-cycle engine oil. If Premium Exact Mix™ 2-cycle engine oil is not available, use a high quality 2-cycle engine oil, mixed at a 50:1 ratio. See chart later in this section.

TO MIX THE FUEL:

�n Use a clean container that is approved for use with gasoline.

�n Mix the Premium Exact Mix™ 2-cycle engine oil with unleaded gasoline in the container, according to the instructions on the oil package.

This engine is certified to operate on unleaded gasoline intended for automotive use with an octane rating of 87 ([R + M] / 2) or higher. Do not use automotive oil or 2-cycle outboard oil.

NOTE: Premium Exact Mix™ fuel mixture will stay fresh up to 30 days. DO NOT mix quantities larger than usable in a 30 day period.

PREMIUM EXACT MIX™ (50:1)

GASOLINE

OIL

1 Gallon (US)

2.6 oz.

1 Liter

20 cc (20 ml)

FILLING THE TANK

WARNING:

Always stop the engine before filling the fuel tank. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from the refueling area before starting engine. Do not smoke while filling the tank.

nClean the surface around the fuel cap to prevent con- tamination.

nLoosen the fuel cap slowly by turning counterclock- wise.

nPour the fuel mixture carefully into the tank.

n�Clean and inspect the fuel cap gasket before replacing the fuel cap.

�n Replace the fuel cap and tighten it by turning it clock- wise.

�n Wipe spilled fuel from the product.

��n Move at least 30 ft. away from refueling area before start- ing the product.

NOTE: It is normal for smoke to be emitted from a new engine during first use.

WARNING:

Check for fuel leaks. A leaking fuel cap is a fire hazard and must be replaced immediately. If you find any leaks, correct the problem before using the product. Failure to do so could result in a fire that could cause serious personal injury.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsSpecific Safety Rules General Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsService Product Specifications FeaturesAssembly FeaturesAssembling the Blower Tubes Mixing the Fuel OperationPremium Exact MIX Filling the TankOperating the Blower Starting and StoppingTo Start a Cold Engine To Start a Warm EngineTo Engage the Cruise Control Cruise Control Throttle LockMaintenance General MaintenanceLubrication Accessories Idle Speed Adjustment Screw TroubleshootingLimited Warranty Statement WarrantyMANUFACTURER’S Warranty Coverage This Product WAS Manufactured with a Catalyst Muffler California Proposition Service Repair Parts

UT08012, UT08512 specifications

The Homelite UT08512 and UT08012 are innovative outdoor power tools designed to enhance the efficiency of lawn care and landscaping tasks. Known for their durability and ease of use, both models cater to homeowners and professionals alike, ensuring a reliable performance for a wide array of outdoor maintenance needs.

One of the standout features of the Homelite UT08512 is its lightweight and ergonomic design. This makes it easy to handle for extended periods without causing fatigue, which is particularly beneficial for large mowing jobs. The UT08512 is equipped with a powerful electric motor that provides consistent and strong performance, ensuring that users can tackle thick grass and tough terrains with ease.

The UT08012 model, while similar in design, brings its own unique strengths. This variant is recognized for its string trimmer performance, featuring a dual-line bump feed head that allows for efficient trimming and edging around fences, trees, and garden beds. This convenience of the bump feed mechanism enables users to quickly advance the line, maintaining workflow without interruptions.

Both models integrate advanced technology that helps optimize energy usage, contributing to increased efficiency. They are designed with user-friendly controls, with easy-to-access switches that make operation straightforward even for those who are less experienced with power tools. The Homelite UT08512 and UT08012 are also noted for their low noise levels and minimal vibrations, improving user comfort during operation.

Another characteristic that sets these models apart is their emphasis on safety. Each tool features protective guards to shield users from debris during operation, alongside emergency shut-off switches for quick responses to unexpected situations.

Additionally, the materials used in construction ensure longevity and resistance against wear and tear, making them a smart investment for anyone committed to maintaining their outdoor spaces. Whether you are trimming grass, edging flower beds, or completing general lawn maintenance, the Homelite UT08512 and UT08012 are reliable companions that deliver excellent performance while prioritizing user comfort and safety. With their combination of power, versatility, and user-friendly features, these tools are ideal choices for any outdoor project.
Top Page Image Contents