Homelite UT08120B, UT08931 manual Maintenance

Page 11

MAINTENANCE

WARNING:

Use only original manufacturer's replacement parts, accessories and attachments. Failure to do so can cause possible injury, poor performance and may void your warranty.

REPLACING AND CLEANING THE AIR FILTER

See Figure 8.

For proper performance and long life, keep air filter clean.

1.Push down on the latch of the air filter cover; carefully pull the top of the air filter cover so it pivots away from the base.

2.Remove the air filter and clean it in warm soapy water. Rinse and let dry completely. For best performance, replace the air filter annually.

3.Reinstall the air filter into the air filter base.

4.Pivot the cover back in place. Push the latch back into the slot and ensure the cover is locked in place.

SPARK ARRESTOR

The muffler is equipped with a spark arrestor screen inside muffler body. After extended use the screen can become dirty and may need to have the muffler replaced by an authorized servicing dealer.

WARNING:

To avoid a fire hazard, never run the blower without the spark arrestor in place.

CLEANING THE EXHAUST PORT AND MUF- FLER

Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port and muffler may become blocked with carbon deposits. If you notice low power from the blower, have a qualified service technician check the exhaust port and muffler for carbon deposits. Removing the carbon deposits should restore performance to the blower.

BASE

AIR FILTER

LATCH

AIR FILTER

 

COVER

Fig. 8

 

FUEL CAP

WARNING:

A leaking fuel cap is a fire hazard and must be replaced immediately.

The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, the check valve may be faulty or filter clogged. Replace the fuel cap if required.

SPARK PLUG

This engine uses a Champion RCJ-6Y with 0.63 mm (0.025 in.) electrode gap. Use an exact replacement and replace annually.

STORAGE (1 MONTH OR LONGER)

1Drain all fuel from the tank into a container approved for gasoline. Run engine until it stops.

2Clean all foreign material from the blower. Store it in a well-ventilated place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

3Abide by all Federal and local regulations for the safe storage and handling of gasoline. Excess fuel should be used up in other 2-cycle engine powered equipment.

Page 11

Image 11
Contents Operators Manual Introduction Table of ContentsSpecific Safety Rules General Safety RulesSymbol Name Explanation SymbolsSymbol Signal Meaning ServiceStarter Grip Upper Blower Tube SpecificationsPacking List FeaturesAssembly InstructionsPremium Exact MIX Gasolineoil OperationMixing the Fuel Filling the TankOperating the Blower Starting and StoppingTo Engage the Cruise Control Throttle Lock Cruise Control Throttle LockMaintenance Idle Speed Adjustment Screw Needle TroubleshootingLimited Warranty Statement WarrantyManufacturers Warranty Coverage Accessories AccessoriesService Repair Parts

UT08120, UT08120B, UT08931 specifications

The Homelite UT08120B, UT08931, and UT08120 are notable power tools designed for efficiency and convenience in outdoor maintenance tasks. These products exemplify Homelite's commitment to delivering quality equipment for both homeowners and professionals.

The Homelite UT08120B is a versatile electric chainsaw that stands out for its lightweight design and easy handling. It features a robust 8-amp motor that delivers smooth cutting performance while minimizing vibrations for user comfort. The bar length of 12 inches allows for easy maneuverability in tight spaces, making it perfect for pruning and light to moderate cutting tasks. Additionally, it comes with a tool-less chain tensioning system that simplifies adjustments, promoting efficient workflow. Safety is paramount with the inclusion of a chain brake that stops the saw immediately, reducing the risk of accidental injury.

Moving to the Homelite UT08931, this model is an efficient string trimmer that offers both power and ease of use. Equipped with a powerful 25cc engine, the UT08931 delivers robust cutting performance necessary for tackling dense vegetation and overgrown lawns. Its curved shaft design allows for excellent reach and maneuverability, making it ideal for edging and trimming in hard-to-reach areas. The trimmer features a 2-in-1 capability, allowing users to switch easily between trimming and edging tasks. With a bump-feed line advancement system, users can quickly and efficiently extend the cutting line as needed.

Lastly, the Homelite UT08120 is another member of the Homelite family that caters to the needs of garden enthusiasts. This electric hedge trimmer boasts a powerful motor that delivers consistent cutting power through branches and leaves. The 20-inch dual-action blades ensure cleaner cuts, reducing the time spent on maintenance. The ergonomic design includes soft grips that enhance comfort during prolonged use, while the lightweight construction minimizes user fatigue.

Each of these models showcases Homelite's continuous innovation in the power tool industry. With reliable technology, safety features, and user-friendly designs, the Homelite UT08120B, UT08931, and UT08120 are ideal choices for maintaining outdoor spaces effectively and efficiently. Whether for casual gardening or more intensive yard work, these tools offer the performance and convenience needed to achieve optimal results.