Homelite UT10552 manual California Proposition, Model Number, Serial Number

Page 38

OPERATOR’S MANUAL

18 in. 46cc CHAIN SAW

UT10552

WARNING:

The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

CALIFORNIA PROPOSITION 65

SERVICE

For parts or service, contact your nearest Homelite authorized service dealer. Be sure to provide all relevant information when you call or visit. For the location of the authorized service dealer nearest you, please call 1-800-242-4672 or visit us online at www.homelite.com.

REPAIR PARTS

The model number of this product is found on a plate or label attached to the housing. Please record the serial number in the space provided below.

MODEL NUMBER

UT10552

_______

SERIAL NUMBER

 

 

HOMELITE CONSUMER PRODUCTS, INC.

1428 Pearman Dairy Road

Anderson, SC 29625

Phone 1-800-242-4672

www.homelite.com

983000-736

12-19-05 (REV:00)

Page 37 Page 38
Image 38
Page 37 Page 38
Contents OPERATOR’S Manual UT10552Table of contents IntroductionGeneral safety rules Read ALL InstructionsKickback Specific safety rulesRefueling do not Smoke Symbols Symbol NameService Glossary of terms Release FeaturesProduct Specifications Assembly Handling the Fuel Safely OperationApplications Mixing the FuelOperating the Chain Brake Filling the Fuel TankAdding BAR and Chain OIL See Figures 4See Figures 6 Ignition switchStarting the Engine RUN PositionTo Start a Warm Engine Throttle Lock button Trigger Ignition switch StopStopping the Engine See Figures 12Idle speed screw T Pull Push Adjusting Idle SpeedPull and Push See Figures 16 Kickback PrecautionsProper Grip on Handles Proper Cutting Stance Work Area PrecautionsBasic OPERATING/CUTTING Procedures UndersideSee Figures 21 Proper Procedure for Tree FellingHazardous Conditions Hinge Back CUT Wedge Removing Buttress RootsBucking Vertical Cut Loose SectioN Horizontal KickbackOverbucking Bucking with a WedgeBucking Logs Under Stress Finishing CUTCutting Springpoles UnderbuckingLimbing and Pruning See Figures 31Lubrication MaintenanceGeneral Maintenance See Figures 34BAR Groove Chain Drive Links Chain Drive LinksSprocket Flats on Drive Links Adjusting the Chain TensionSee Figures 44 ≈ .050 in .25 mm 050 1.25 mm Chain MaintenanceSee Figures 47 Raker Depth Gauge ClearanceLeft Hand Cutters Right Hand Sharpening the CuttersSee Figures 49 Maintaining Depth Gauge Clearance TOP Plate Filing AngleSide Plate Angle SeeMaintaining the SAFE-T-TIP Nose Guard Maintaining the Guide BARMounting the SAFE-T-TIP Nose Guard See Figures 59Cleaning the AIR Filter See Figures 61Before adjusting the carburetor Adjusting the CarburetorCleaning the Starter Unit See Figures 64Replacing the Spark Plug Cleaning the EngineChecking the Fuel Filter See Figures 67Deflector Retaining ScrewS PlateBAR and Chain Combinations Troubleshooting Call US FirstWarranty Limited Warranty StatementMaintenance Requirements MANUFACTURER’S Warranty CoverageOWNER’S Warranty Responsibilities CoverageCarburetor Assy Emissions Maintenance Schedule and Warranted Parts ListAIR Filter Assy Fuel Tank AssyPage Serial Number California PropositionModel Number UT10552
Top Page Image Contents