Marantz ST6001 manual Operations, Memory Presetting, FINE, Manual Tuning

OPERATIONS

MEMORY PRESETTING

7Manual operation

For example: presetting FM 90.1 MHz, to Preset number. 10

1.Select the FM by using the BAND button !7.

2.Tune to 90.1 MHz by using the TUNING 5∞ button i.

3.Press the MEMO button !1briefly (for less than 0.5 second) Then, “MEMO” will blink in the display.

4.Select the preset number by using the PRESET 5∞ button !4.

5.MEMO button !1pushed again, 90.1 MHz (broadcast station) was able to be memorized in number 10 by this.

Note

Be sure to select the antenna A or B memorization when you preset manual memory in FM broadcast.

7Automatic operation

1.Select the desired broadcasting (FM, AM, or LW) by using the BAND button !7.

2.Press the MEMO button !1slightly longer than 1.5 second does.

Then, broadcasting will be automatically received, and as many broadcasting station are received well will be memorized preset number-01 after another.

3.Check the broadcasting station by using the PRESET 5∞ button !4.

Note

•In the case of FM automatic presetting, the antenna A, B selector is set to “A” automatically,

And the broadcasting station is scanned twice. The stations that have stronger broadcasting signal are preset in the first time.; weaker ones are preset in the second time.

•If a new broadcasting station is preset into a channel the broadcasting station which has been preset into that position area will be automatically erased.

•In mountainous or remote area broadcasting stations which have weak broadcasting signals cannot be automatically preset into the memory.

•Max. 30 broadcasting stations each for FM, AM(MW and LW) bands can be preset.

LISTENING TO RADIO ENGLISH

1.Select FM, AM, or LW by using the BAND button !7.

2.Tune to the desired broadcast by using the TUNING i or PRESET 5∞ button !4.

3.FM broadcasting is set up to “STEREO” mode

If the broadcasting signal is weak, or if there is a large amount of interference in FM stereo broadcast, change the monaural mode by presetting the FM MODE button

!5.

4.Select the IF BAND (FM bandwidth)

Select the NARROW bandwidth by pressing this button if the broadcast signal is interfered with adjacent broadcast in the FM .

FINE, MANUAL TUNING

This function used for selection the manual tuning of the fine tuning mode.

Fine tuning mode is available only in the FM mode.

1.Press the TUNING MODE button u.

2.Every time you press this button, the following will be displayed FINE ⇔ MANUAL.

7In FINE (Tuning) mode

When you try press the TUNING 5∞ button i, the frequency will be selected by 10 kHz step to ±50 kHz. Then, it will automatically be set to the MANUAL mode in 4 second.

7In MANUAL (Tuning) mode

1.Press the TUNING 5∞ button i in the FM band, then the frequency will be selected by 50 kHz step.

2.In the MW band, the frequency will be selected by 9 kHz step.

3.In the LW band, the frequency will be selected by 1 kHz step.

!4

F M / A M T U N E R S T 6 0 0 1

TIMER DAILY ONCE TUNED STEREO RDS PTY PT TP TA MEMO

PRESET CH

kHz

MHz

u i !1 !5 !7

7