Hearth and Home Technologies GFK-210-C Maintenance, Replacement Parts and Customer Service

Page 3

5.0INSTALLINGTHEOPTIONALVARIABLESPEED CONTROL AND TEMPERATURE SENSOR SWITCH

If using a remote control system that utilizes a blower (fan) control, disregard steps 1-3 and follow remote con- trol installation instructions.

NOTICE! The sensor switch and rheostat are not used if the blower is controlled with the RC300 remote control.

1.Slide the variable speed control behind the control panel. With the stem sticking out of the pre-punched hole, attach the locknut tightly and reattach the knob on the stem. See Figure 6. Turn the speed control switch to the "ON" position.

2.Slide the temperature sensor switch onto the blower stud located on the bottom of the combustion box. See Figure 3. Secure the temperature sensor switch with the wing nut provided.

NOTICE: The blower stud is located on the bottom of the combustion box. See Figure 6.

NOTICE: The temperature sensor switch must be installed so that the sensor switch is facing the combustion box surface. See Detail A of Figure 6.

3.Connect the variable speed control and the temperature sensor switch to the power cord. See Figure 7.

4.Gather the loose wires underneath the appliance and use the zip ties to restrain them and keep them away from the blower wheel (fan blades). See Figure 7, Detail A.

5.Turn the 110-120 VAC service "ON" at the circuit breaker.

6.0RECOMMENDED OPERATING PROCE- DURES WHEN VARIABLE SPEED CONTROL AND TEMPERATURE SENSOR SWITCH ARE USED

Ignite the fire in the fireplace with the variable speed control switch in an "ON" position. The fan will automatically turn on when the temperature sensor switch closes at approxi- mately 110O F. Heated air will be delivered at the outlet grille. The fan will continue to operate after the fireplace is turned OFF until the temperature sensor switch opens.

NOTICE! During operation, ensure that all wiring is kept away from the blower wheel (fan blades).

Various conditions (such as fireplace model, type of fire- place installation, outside air temperature vs. inside air temperature) can contribute to the length of the time the blower remains on after the fireplace is turned OFF. The blower can be turned off manually with the speed control switch.

WARNING! Risk of Injury! DO NOT contact the blower

wheel (fan blades) during operation.

7.0 MAINTENANCE

Periodically check the fireplace and remove any dust, dirt or obstructions.

8.0REPLACEMENT PARTS AND CUSTOMER SERVICE

Replacement parts and service may be obtained through your dealer.

Rheostat/Temperature Sensor Assembly:

SRV2206-800

VARIABLE

 

 

SPEED

TEMPERATURE

CONTROL

SENSOR

 

 

SWITCH

BLOWER

 

 

STUD

DETAIL A

 

 

COMBUSTION BOX SURFACE

 

 

BLOWER STUD

 

 

TEMPERATURE SENSOR SWITCH

 

 

Figure 6.

Hearth & Home Technologies • GFK-210-C Blower System Instructions 2201-938 Rev. E • 9/12

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Check Contents of Shipping Carton Installation PrecautionsIntroduction Remove Blower Brackets Installing the Blower Metal InsertsMaintenance Replacement Parts and Customer ServiceDetail a Detail a ZIP TiesRheostat Blower Plug 120V ExistingOutlet Speed ControlQFI30FB, QFI35FB Installing the Blower FireBrick InsertsFan Wiring Diagram FireBrick Inserts

GFK-210-C specifications

Hearth and Home Technologies has introduced the GFK-210-C, a versatile and efficient heating product that combines modern technology with user-friendly features. This unit is designed to enhance the warmth of your home while providing an array of functionalities that cater to the comfort and needs of today’s homeowners.

One of the standout features of the GFK-210-C is its advanced heat circulation technology. It utilizes a powerful blower system that effectively distributes warm air throughout the room, ensuring that every corner of your living space is enveloped in cozy warmth. This technology not only maximizes comfort but also improves energy efficiency, as it allows the unit to operate optimally even in larger spaces.

The GFK-210-C also features a state-of-the-art thermostat control. This intelligent system allows users to set their desired temperature, and the unit will automatically adjust its output to maintain that level of warmth consistently. This feature helps to save on energy costs while ensuring that homeowners enjoy a comfortable environment at all times.

Additionally, the GFK-210-C incorporates a sleek and modern design, making it an aesthetically pleasing option for any interior. Its compact form allows it to fit seamlessly into various settings, whether it is a traditional or contemporary home decor. The design is not just about looks; the materials used in its construction are durable and ensure a long lifespan, which is important for any heating appliance.

For added convenience, the GFK-210-C comes with a remote control. This functionality allows users to adjust settings without having to leave the comfort of their seat, showcasing the unit's commitment to user-friendly operation. This remote feature also includes programmable timer settings, providing even more control over heating schedules.

Safety is paramount, and the GFK-210-C is equipped with several safety features. This includes heat sensors and an automatic shut-off mechanism, which activate in case of overheating, providing peace of mind to users.

In summary, the Hearth and Home Technologies GFK-210-C is not just a heating appliance; it is a blend of efficiency, safety, and modern design. With its advanced heat circulation, intelligent thermostat control, convenient remote operation, and integrated safety features, it stands out as a top choice for homeowners looking to enhance their living environment.
Top Page Image Contents