Cleaning Recommendation for Hansgrohe Products

Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.

Cleaning Materials for Faucets and Showers

Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when cleaning faucets and showers:

•Only use cleaning materials which are explicitly intended for this type of application.

•Never use cleaning materials which contain hydrochloric, formic, phosphoric, or acetic acid, as they cause considerable damage.

•Never mix one cleaning material with another.

•Never use cleaning materials or appliances with an abrasive effect, such as unsuitable cleaning powders, sponge pads, or micro fiber cloths.

Cleaning Instructions for Faucets and Showers

Please follow the cleaning material manufacturer’s instructions. In addition, pay attention to the following points:

•Clean the faucets and showers as and when required

•Use the amount of cleaning product and the amount of time recommended by the manufacturer. Do not leave the cleaner on the fixture longer than necessary.

•Regular cleaning can prevent calcification.

•When using spray cleaners, spray first onto a soft cloth or sponge. Never spray directly onto the faucet as droplets can enter openings and gaps and cause damage.

•After cleaning, rinse thoroughly with clean water to remove any cleaner residue.

Important

Residues of liquid soaps, shampoos, and shower foams can also cause damage, so rinse with clean water after using.

Please note: if the surface is already damaged, the effect of cleaning materials will cause further damage.

Components with damaged surfaces must be replaced or injury could result.

Damage caused by improper treatment is not covered under the warranty.

Limited Lifetime Consumer Warranty

This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.

WHO IS COVERED BY THE WARRANTY

This warranty extends to the original consumer purchaser only. This warranty is non-transferable.

WHAT IS COVERED BY THE WARRANTY

This warranty covers only your Hansgrohe manufactured product. Hansgrohe warrants this product against defects in material or workmanship as follows: Hansgrohe will repair at no charge for parts only or, at its option, replace any product or part of the product that proves defective because of improper workmanship and/or material, under normal installation, use, service and maintenance. If Hansgrohe is unable to provide a replacement and repair is not practical or cannot be timely made, Hansgrohe may elect to refund the purchase price in exchange for the return of the product.

6607000 specifications

The Hansgrohe 6607000, also known as the Raindance S 240 Air Showerhead, is a premier addition to any modern bathroom. With its stunning design and advanced technologies, this showerhead offers an unparalleled shower experience that combines luxury, comfort, and functionality.

One of the standout features of the Hansgrohe 6607000 is its AirPower technology. This innovative system enriches each water droplet with air, creating a softer, more voluminous spray that mimics the feeling of natural rainfall. The result is a gentle yet invigorating shower that envelops users in a comforting embrace, transforming the daily routine into a spa-like experience.

Another key characteristic of the 6607000 is its versatile spray modes. The showerhead is equipped with three distinct spray patterns: Rain, RainAir, and Whirl. Users can easily switch between these modes, allowing for a customized experience based on their mood or preference. The Rain mode delivers a wide, full spray, while RainAir provides a lighter sensation with added air for a fluffy feel. The Whirl mode, on the other hand, offers a concentrated spray that is perfect for a soothing massage after a long day.

Design is equally important in the Hansgrohe 6607000. Its sleek round profile and minimalist aesthetic make it a stylish addition to any contemporary bathroom. The showerhead features a durable chrome finish that not only enhances its appearance but also ensures long-lasting performance and resistance to tarnishing.

Maintenance is made easy with the QuickClean feature, which eliminates limescale buildup. This technology allows users to wipe away deposits effortlessly with a simple swipe of a finger, ensuring that the showerhead remains in pristine condition with minimal effort.

With a flow rate of 2.5 gallons per minute, the Hansgrohe 6607000 strikes a balance between performance and water conservation. This efficiency means homeowners can enjoy a luxurious shower while being mindful of their water usage.

In summary, the Hansgrohe 6607000 Raindance S 240 Air Showerhead is an exceptional choice for those seeking a high-quality, stylish, and technologically advanced shower fixture. With its AirPower technology, versatile spray modes, user-friendly maintenance, and elegant design, it redefines what a shower can be, making daily routines a pleasure instead of a chore.