11.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times.
12.DISCONNECT POWER. Unplug when not in use, before servicing, and when changing accessories.
13.REMOVE ADJUSTING KEYS AND WRENCHES. Make it a habit to check that keys and adjusting wrenches are removed from the tool or machine work surface before plugging it in.
14.AVOID UNINTENTIONAL STARTING. Be sure the switch is in the OFF position when not in use and before plugging in.
Do not carry any tool with your finger on the trigger, whether it is plugged in or not.
damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn on and off properly.
18.GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
19.REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.
20.DO NOT OPERATE TOOL IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.
|
|
|
|
|
|
| |
15. OUTDOOR EXTENSIONS CORDS. |
|
| UNPACKING |
|
| ||
When the equipment is operated | If any parts are missing or broken, | ||||||
outdoors, use only extension cords | |||||||
please call Harbor Freight Tools at the number | |||||||
intended for outside use. See chart | |||||||
on the cover of this manual. |
|
| |||||
under “Extension Cords" for the proper |
|
| |||||
|
|
|
|
|
| ||
AWG rating depending on the length of |
|
|
|
|
|
| |
| Part |
| Description | Qty | |||
the cord(s) being used. |
| 1 |
| Body | 1 |
| |
16. STAY ALERT. Watch what you are |
| N/A |
| Handle Assembly | 1 |
| |
| 6 |
| Plate | 1 |
| ||
doing; use common sense. Do not |
| 10 |
| Rack | 1 |
| |
operate any tool when you are tired. |
|
|
|
|
|
| |
17.CHECK DAMAGED PARTS. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is
SKU 03551 03552 For technical questions, please call | Page 3 |