Harbor Freight Tools 95781 manual Personal Safety, Product USE and Care

Page 3

grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the product should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

2.Double insulated products are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

3.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

4.Do not expose the AC/DC Adapter of this product to rain or wet conditions. Water entering the Adapter will increase the risk of electric shock.

5.Do not abuse the Power Cord. Never use the Power Cord to carry this prod- uct or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.

6.When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric shock.

Personal Safety

1.Stay alert. Watch what you are doing, and use common sense when operat- ing this product. Do not use this product while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating electrically powered products may result in serious personal injury.

2.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.

3.Use safety equipment. Wear ANSI approved safety eye goggles when assem- bling this product.

PRODUCT USE AND CARE

1.Do not force this product. Use the correct product for your application. The correct product will do the job better and safer at the rate for which it is designed. Do not force this product and do not use this product for a purpose for which it is not intended.

SKU 95781

For technical questions, please call 1-800-444-3353.

Page

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Automatic PET Water Fountain For technical questions or replacement parts, please callWork Area SpecificationsGeneral Safety Rules Electrical SafetyPersonal Safety Product USE and CareSKU For technical questions, please call Service Specific Safety RulesGrounded PRODUCTs PRODUCTs With Three Prong Plugs GroundingDouble Insulated PRODUCTs PRODUCTs With Two Prong Plugs Extension CordsSee Table a Nameplate Extension Cord Length Assembly InstructionsSymbology UnpackingFigure a See Figure CFigure D See Figure H Operating InstructionsDo not use damaged equipment INSPECTION, MAINTENANCE, and CleaningUse Months TroubleshootingProblem Possible Causes Probable Solutions Please Read the Following CarefullyParts List and Diagram Record Product’s Serial Number HerePart Description ’ty Assembly Diagram

95781 specifications

Harbor Freight Tools has long been known for its range of high-quality, affordable tools, and the 95781 might be one of its standout products in this domain. The 95781 is a versatile tool that has captured the attention of hobbyists and professionals alike due to its impressive features and practical applications.

One of the main features of the Harbor Freight Tools 95781 is its durable construction. Built from high-quality materials, this tool is designed to withstand the rigors of heavy use. Whether you're working on automotive projects, construction tasks, or DIY home improvements, the robust build ensures longevity and reliability.

Another standout characteristic of the 95781 is its ergonomic design. Harbor Freight has prioritized user comfort with this tool, incorporating features that minimize strain during prolonged use. The handle is designed for a secure grip, allowing for greater control and precision in various applications. This attention to ergonomics is especially beneficial for users who engage in extended projects.

The 95781 also boasts a wide range of functionalities. It is equipped with advanced technology that allows for easy adjustment and versatility. Users can tackle various tasks, including tightening, loosening, or assembling components with minimal effort. This flexibility makes the 95781 an indispensable tool for both novice and seasoned professionals.

Additionally, the tool features precise measurement markings, allowing users to calibrate and adjust settings with accuracy. This feature significantly enhances efficiency, enabling users to complete tasks more quickly and with greater confidence.

One of the many advantages of the Harbor Freight Tools 95781 is its exceptional value. While it offers features comparable to higher-priced tools on the market, it remains budget-friendly. This accessibility makes it an attractive option for those looking to build their tool collection without breaking the bank.

In conclusion, Harbor Freight Tools 95781 is a formidable tool that stands out due to its durable construction, ergonomic design, versatile functionalities, and precise measurement capabilities. Ideal for a variety of applications, it offers excellent value, making it a worthwhile addition to any workshop. As tool enthusiasts and professionals seek reliable equipment, the 95781 proves to be a practical choice in a competitive market.
Top Page Image Contents